From: Archit Taneja <architt@codeaurora.org>
To: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 00/10] drm/msm/dsi: Dual DSI and 8x96 PHY/PLL support
Date: Sat, 7 Jan 2017 18:40:32 +0530 [thread overview]
Message-ID: <1483794642-2184-1-git-send-email-architt@codeaurora.org> (raw)
This set adds 8x96 PHY/PLL with Dual DSI mode supported too.
Dual DSI on 8x96 requires the DSI host/manager drivers to propagate
some usecase info to the PHY/PLL drivers. Hai Li had worked on
some patches in the past to implement this.
Tested on 8996 MTP Dual DSI panel, and with a LeMaker panel (single DSI)
on DB820c.
Archit Taneja (6):
drm/msm/dsi: Don't error if a DSI host doesn't have a device connected
drm/msm/dsi: Add 8x96 info in dsi_cfg
drm/msm/dsi: Add a PHY op that initializes version specific stuff
drm/msm/dsi: Reset both PHYs before clock operation for dual DSI
drm/msm/dsi: Udpate generated headers for 14nm PHY and PLL
drm/msm/dsi: Add PHY/PLL for 8x96
Hai Li (4):
drm/msm/dsi: Return more timings from PHY to host
drm/msm/dsi: Pass down use case to PHY
drm/msm/dsi: Move PHY operations out of host
drm/msm/dsi: Add new method to calculate 14nm PHY timings
drivers/gpu/drm/msm/Kconfig | 7 +
drivers/gpu/drm/msm/Makefile | 2 +
drivers/gpu/drm/msm/dsi/dsi.h | 46 +-
drivers/gpu/drm/msm/dsi/dsi.xml.h | 252 ++++++
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 25 +
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
drivers/gpu/drm/msm/dsi/dsi_host.c | 95 +-
drivers/gpu/drm/msm/dsi/dsi_manager.c | 195 +++--
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 238 ++++-
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 20 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 168 ++++
drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c | 5 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 6 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 5 +-
drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 12 +
drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 11 +
drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 1067 +++++++++++++++++++++++
17 files changed, 1985 insertions(+), 170 deletions(-)
create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2017-01-07 13:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-07 13:10 Archit Taneja [this message]
2017-01-07 13:10 ` [PATCH 01/10] drm/msm/dsi: Don't error if a DSI host doesn't have a device connected Archit Taneja
2017-01-07 13:10 ` [PATCH 02/10] drm/msm/dsi: Add 8x96 info in dsi_cfg Archit Taneja
2017-01-07 13:10 ` [PATCH 03/10] drm/msm/dsi: Add a PHY op that initializes version specific stuff Archit Taneja
2017-01-07 13:10 ` [PATCH 04/10] drm/msm/dsi: Return more timings from PHY to host Archit Taneja
2017-01-07 13:10 ` [PATCH 05/10] drm/msm/dsi: Pass down use case to PHY Archit Taneja
2017-01-07 13:10 ` [PATCH 06/10] drm/msm/dsi: Reset both PHYs before clock operation for dual DSI Archit Taneja
2017-01-07 13:10 ` [PATCH 07/10] drm/msm/dsi: Move PHY operations out of host Archit Taneja
2017-01-07 13:10 ` [PATCH 08/10] drm/msm/dsi: Udpate generated headers for 14nm PHY and PLL Archit Taneja
2017-01-07 13:10 ` [PATCH 09/10] drm/msm/dsi: Add new method to calculate 14nm PHY timings Archit Taneja
2017-01-07 13:10 ` [PATCH 10/10] drm/msm/dsi: Add PHY/PLL for 8x96 Archit Taneja
2017-01-19 20:17 ` Stephen Boyd
2017-01-23 4:06 ` Archit Taneja
2017-01-25 4:09 ` [PATCH v2 " Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483794642-2184-1-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox