[PATCH] regulator: qcom_spmi: Add support for pmi8994

[Rajendra Nayak <rnayak@codeaurora.org>]

Document the regulators available on pmi8994 and add support for
this PMIC to the SPMI PMIC regulator driver.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 .../devicetree/bindings/regulator/qcom,spmi-regulator.txt   | 13 +++++++++++++
 drivers/regulator/qcom_spmi-regulator.c                     |  9 +++++++++
 2 files changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 0fa3b0f..57d2c65 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -8,6 +8,7 @@ Qualcomm SPMI Regulators
 			"qcom,pm8916-regulators"
 			"qcom,pm8941-regulators"
 			"qcom,pm8994-regulators"
+			"qcom,pmi8994-regulators"
 
 - interrupts:
 	Usage: optional
@@ -100,6 +101,15 @@ Qualcomm SPMI Regulators
 	Definition: Reference to regulator supplying the input pin, as
 		    described in the data sheet.
 
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_l1-supply:
+	Usage: optional (pmi8994 only)
+	Value type: <phandle>
+	Definition: Reference to regulator supplying the input pin, as
+		    described in the data sheet.
+
 
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
@@ -122,6 +132,9 @@ pm8994:
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
 	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
 
+pmi8994:
+	s1, s2, s3, l1
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:
 
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 16c5f84..9f8eb5d 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1619,11 +1619,20 @@ static int spmi_regulator_of_parse(struct device_node *node,
 	{ }
 };
 
+static const struct spmi_regulator_data pmi8994_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "l1", 0x4000, "vdd_l1", },
+        { }
+};
+
 static const struct of_device_id qcom_spmi_regulator_match[] = {
 	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
 	{ .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
 	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
 	{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
+	{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation