Re: [PATCH 1/2] soc: qcom: smp2p: Add irqchip state support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 9/24/25 6:18 AM, Jingyi Wang wrote:
> From: Chris Lew <chris.lew@oss.qualcomm.com>
> 
> A remoteproc booted during earlier boot stages such as UEFI or the
> bootloader, may need to be attached to without restarting the remoteproc
> hardware. To do this the remoteproc will need to check the ready and
> handover states in smp2p without an interrupt notification.
> 
> Add support for the .irq_get_irqchip_state callback so remoteproc can
> read the current state of the fatal, ready and handover bits.
> 
> Signed-off-by: Chris Lew <chris.lew@oss.qualcomm.com>
> Co-developed-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---
>  drivers/soc/qcom/smp2p.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c
> index cb515c2340c1..e2cfd9ec8875 100644
> --- a/drivers/soc/qcom/smp2p.c
> +++ b/drivers/soc/qcom/smp2p.c
> @@ -222,6 +222,39 @@ static void qcom_smp2p_negotiate(struct qcom_smp2p *smp2p)
>  	}
>  }
>  
> +static void qcom_smp2p_start_in(struct qcom_smp2p *smp2p)
> +{
> +	unsigned int smem_id = smp2p->smem_items[SMP2P_INBOUND];
> +	unsigned int pid = smp2p->remote_pid;
> +	char buf[SMP2P_MAX_ENTRY_NAME];
> +	struct smp2p_smem_item *in;
> +	struct smp2p_entry *entry;
> +	size_t size;
> +	int i;
> +
> +	in = qcom_smem_get(pid, smem_id, &size);
> +	if (IS_ERR(in))
> +		return;
> +
> +	smp2p->in = in;
> +
> +	/* Check if version is initialized and set to v2 */
> +	if (in->version == 0)
> +		return;

This doesn't seem to be fully in line with the comment

Konrad