Re: [PATCH 1/2] soc: qcom: smp2p: Add irqchip state support

[Deepak Kumar Singh <quic_deesin@quicinc.com>]

On 9/24/2025 8:20 PM, Konrad Dybcio wrote:
> On 9/24/25 6:18 AM, Jingyi Wang wrote:
>> From: Chris Lew <chris.lew@oss.qualcomm.com>
>>
>> A remoteproc booted during earlier boot stages such as UEFI or the
>> bootloader, may need to be attached to without restarting the remoteproc
>> hardware. To do this the remoteproc will need to check the ready and
>> handover states in smp2p without an interrupt notification.
>>
>> Add support for the .irq_get_irqchip_state callback so remoteproc can
>> read the current state of the fatal, ready and handover bits.
>>
>> Signed-off-by: Chris Lew <chris.lew@oss.qualcomm.com>
>> Co-developed-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
>> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
>> ---
>>   drivers/soc/qcom/smp2p.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>>
>> diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c
>> index cb515c2340c1..e2cfd9ec8875 100644
>> --- a/drivers/soc/qcom/smp2p.c
>> +++ b/drivers/soc/qcom/smp2p.c
>> @@ -222,6 +222,39 @@ static void qcom_smp2p_negotiate(struct qcom_smp2p *smp2p)
>>   	}
>>   }
>>   
>> +static void qcom_smp2p_start_in(struct qcom_smp2p *smp2p)
>> +{
>> +	unsigned int smem_id = smp2p->smem_items[SMP2P_INBOUND];
>> +	unsigned int pid = smp2p->remote_pid;
>> +	char buf[SMP2P_MAX_ENTRY_NAME];
>> +	struct smp2p_smem_item *in;
>> +	struct smp2p_entry *entry;
>> +	size_t size;
>> +	int i;
>> +
>> +	in = qcom_smem_get(pid, smem_id, &size);
>> +	if (IS_ERR(in))
>> +		return;
>> +
>> +	smp2p->in = in;
>> +
>> +	/* Check if version is initialized and set to v2 */
>> +	if (in->version == 0)
>> +		return;
> 
> This doesn't seem to be fully in line with the comment
> 
> Konrad
> 
Hi Konard,

Can you please elaborate more on this?
in->version == 0 means remote has not initialized the version yet, so no 
need of enumerating entries. For other case i.e in->version == 1 or 2, 
in entries added by early booted remote has to be enumerated.

Thanks,
Deepak