From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: manivannan.sadhasivam@linaro.org
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [PATCH v1 09/10] bus: mhi: core: Move to an error state on mission mode failure
Date: Fri, 18 Sep 2020 19:02:34 -0700 [thread overview]
Message-ID: <1600480955-16827-10-git-send-email-bbhatt@codeaurora.org> (raw)
In-Reply-To: <1600480955-16827-1-git-send-email-bbhatt@codeaurora.org>
If the host receives a mission mode event and by the time it can get
to processing it, the register accesses fail implying a connectivity
error, MHI should move to an error state. This helps avoid longer wait
times from a synchronous power up perspective and accurately reflects
the MHI execution environment and power management states.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
drivers/bus/mhi/core/pm.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index bce1f62..16c04ab 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -384,10 +384,14 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
write_lock_irq(&mhi_cntrl->pm_lock);
if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state))
mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
- write_unlock_irq(&mhi_cntrl->pm_lock);
- if (!MHI_IN_MISSION_MODE(mhi_cntrl->ee))
+ if (!MHI_IN_MISSION_MODE(mhi_cntrl->ee)) {
+ mhi_cntrl->pm_state = MHI_PM_LD_ERR_FATAL_DETECT;
+ write_unlock_irq(&mhi_cntrl->pm_lock);
+ wake_up_all(&mhi_cntrl->state_event);
return -EIO;
+ }
+ write_unlock_irq(&mhi_cntrl->pm_lock);
wake_up_all(&mhi_cntrl->state_event);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-09-19 2:03 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-19 2:02 [PATCH v1 00/10] Bug fixes and improvements for MHI power operations Bhaumik Bhatt
2020-09-19 2:02 ` [PATCH v1 01/10] bus: mhi: core: Use appropriate names for firmware load functions Bhaumik Bhatt
2020-10-09 15:23 ` Manivannan Sadhasivam
2020-09-19 2:02 ` [PATCH v1 02/10] bus: mhi: core: Move to using high priority workqueue Bhaumik Bhatt
2020-10-09 15:49 ` Manivannan Sadhasivam
2020-09-19 2:02 ` [PATCH v1 03/10] bus: mhi: core: Skip device wake in error or shutdown states Bhaumik Bhatt
2020-10-09 15:54 ` Manivannan Sadhasivam
2020-09-19 2:02 ` [PATCH v1 04/10] bus: mhi: core: Use the IRQF_ONESHOT flag for the BHI interrupt line Bhaumik Bhatt
2020-10-09 15:57 ` Manivannan Sadhasivam
2020-10-09 16:04 ` Jeffrey Hugo
2020-10-12 23:52 ` Bhaumik Bhatt
2020-09-19 2:02 ` [PATCH v1 05/10] bus: mhi: core: Disable IRQs when powering down Bhaumik Bhatt
2020-10-09 16:02 ` Manivannan Sadhasivam
2020-10-13 0:03 ` Bhaumik Bhatt
2020-10-10 23:45 ` Manu Gautam
2020-09-19 2:02 ` [PATCH v1 06/10] bus: mhi: core: Improve shutdown handling after link down detection Bhaumik Bhatt
2020-10-09 16:19 ` Manivannan Sadhasivam
2020-10-13 18:40 ` Bhaumik Bhatt
2020-10-11 0:06 ` Manu Gautam
2020-09-19 2:02 ` [PATCH v1 07/10] bus: mhi: core: Move to SYS_ERROR regardless of RDDM capability Bhaumik Bhatt
2020-10-09 16:32 ` Manivannan Sadhasivam
2020-10-14 1:06 ` Bhaumik Bhatt
2020-09-19 2:02 ` [PATCH v1 08/10] bus: mhi: core: Move to an error state on any firmware load failure Bhaumik Bhatt
2020-10-09 16:42 ` Manivannan Sadhasivam
2020-10-14 1:37 ` Bhaumik Bhatt
2020-09-19 2:02 ` Bhaumik Bhatt [this message]
2020-10-09 16:44 ` [PATCH v1 09/10] bus: mhi: core: Move to an error state on mission mode failure Manivannan Sadhasivam
2020-09-19 2:02 ` [PATCH v1 10/10] bus: mhi: core: Mark device inactive soon after host issues a shutdown Bhaumik Bhatt
2020-10-09 17:18 ` Manivannan Sadhasivam
2020-10-11 0:17 ` Manu Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1600480955-16827-10-git-send-email-bbhatt@codeaurora.org \
--to=bbhatt@codeaurora.org \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox