* [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts
@ 2025-06-06 11:03 Max Shevchenko via B4 Relay
2025-06-06 11:33 ` Konrad Dybcio
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Max Shevchenko via B4 Relay @ 2025-06-06 11:03 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Rudraksha Gupta,
Max Shevchenko
From: Max Shevchenko <wctrl@proton.me>
Replace the raw values with macros. No changes to the output
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
---
Replace the raw values with macros. No changes to the output
---
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 865fe7cc39511d7cb9ec5c4b12100404f77e2989..13572d0b1d5572cc5b9c3a136a6ea6267b8625da 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -18,7 +18,7 @@ / {
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_PPI 14 0x304>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
cpu@0 {
compatible = "qcom,krait";
@@ -54,7 +54,7 @@ memory@80000000 {
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <GIC_PPI 10 0x304>;
+ interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
qcom,no-pc-write;
};
@@ -107,9 +107,9 @@ intc: interrupt-controller@2000000 {
timer@200a000 {
compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
"qcom,msm-timer";
- interrupts = <GIC_PPI 1 0x301>,
- <GIC_PPI 2 0x301>,
- <GIC_PPI 3 0x301>;
+ interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>;
cpu-offset = <0x80000>;
---
base-commit: 0ff41df1cb268fc69e703a08a57ee14ae967d0ca
change-id: 20250603-msm8960-irq-macros-6dafa735cecc
Best regards,
--
Max Shevchenko <wctrl@proton.me>
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts
2025-06-06 11:03 [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts Max Shevchenko via B4 Relay
@ 2025-06-06 11:33 ` Konrad Dybcio
2025-06-07 20:19 ` Dmitry Baryshkov
2025-06-12 4:00 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Konrad Dybcio @ 2025-06-06 11:33 UTC (permalink / raw)
To: wctrl, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Rudraksha Gupta
On 6/6/25 1:03 PM, Max Shevchenko via B4 Relay wrote:
> From: Max Shevchenko <wctrl@proton.me>
>
> Replace the raw values with macros. No changes to the output
>
> Tested-by: Rudraksha Gupta <guptarud@gmail.com>
> Signed-off-by: Max Shevchenko <wctrl@proton.me>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts
2025-06-06 11:03 [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts Max Shevchenko via B4 Relay
2025-06-06 11:33 ` Konrad Dybcio
@ 2025-06-07 20:19 ` Dmitry Baryshkov
2025-06-12 4:00 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Dmitry Baryshkov @ 2025-06-07 20:19 UTC (permalink / raw)
To: wctrl
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Rudraksha Gupta
On Fri, Jun 06, 2025 at 02:03:51PM +0300, Max Shevchenko via B4 Relay wrote:
> From: Max Shevchenko <wctrl@proton.me>
>
> Replace the raw values with macros. No changes to the output
>
> Tested-by: Rudraksha Gupta <guptarud@gmail.com>
> Signed-off-by: Max Shevchenko <wctrl@proton.me>
> ---
> Replace the raw values with macros. No changes to the output
> ---
> arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts
2025-06-06 11:03 [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts Max Shevchenko via B4 Relay
2025-06-06 11:33 ` Konrad Dybcio
2025-06-07 20:19 ` Dmitry Baryshkov
@ 2025-06-12 4:00 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2025-06-12 4:00 UTC (permalink / raw)
To: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Max Shevchenko
Cc: linux-arm-msm, devicetree, linux-kernel, Rudraksha Gupta
On Fri, 06 Jun 2025 14:03:51 +0300, Max Shevchenko wrote:
> Replace the raw values with macros. No changes to the output
>
>
Applied, thanks!
[1/1] ARM: dts: qcom: msm8960: use macros for interrupts
commit: da7811bb0edbea0208800cfa16516a47b8d45747
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2025-06-12 4:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-06 11:03 [PATCH] ARM: dts: qcom: msm8960: use macros for interrupts Max Shevchenko via B4 Relay
2025-06-06 11:33 ` Konrad Dybcio
2025-06-07 20:19 ` Dmitry Baryshkov
2025-06-12 4:00 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox