Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: Sean Paul <sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Abhinav Kumar <abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	Sean Paul <seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [PATCH 03/12] drm/msm: dpu: Remove dpu_power_client
Date: Mon, 12 Nov 2018 16:57:17 -0800	[thread overview]
Message-ID: <1b4f2636f7c924ff13da0e3637e4854d@codeaurora.org> (raw)
In-Reply-To: <20181112194222.193546-4-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>

On 2018-11-12 11:42, Sean Paul wrote:
> From: Sean Paul <seanpaul@chromium.org>
> 
> There's only one client -- core, and it's only used for runtime pm 
> which
> is already refcounted.
> 
> Signed-off-by: Sean Paul <seanpaul@chromium.org>

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>

> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 22 +----
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |  1 -
>  .../gpu/drm/msm/disp/dpu1/dpu_power_handle.c  | 96 +------------------
>  .../gpu/drm/msm/disp/dpu1/dpu_power_handle.h  | 86 +----------------
>  4 files changed, 6 insertions(+), 199 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 985c855796ae..23094d108e81 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -676,11 +676,6 @@ static void _dpu_kms_hw_destroy(struct dpu_kms
> *dpu_kms)
>  		dpu_hw_catalog_deinit(dpu_kms->catalog);
>  	dpu_kms->catalog = NULL;
> 
> -	if (dpu_kms->core_client)
> -		dpu_power_client_destroy(&dpu_kms->phandle,
> -			dpu_kms->core_client);
> -	dpu_kms->core_client = NULL;
> -
>  	if (dpu_kms->vbif[VBIF_NRT])
>  		devm_iounmap(&dpu_kms->pdev->dev,
> dpu_kms->vbif[VBIF_NRT]);
>  	dpu_kms->vbif[VBIF_NRT] = NULL;
> @@ -913,17 +908,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>  		dpu_kms->reg_dma_len = dpu_iomap_size(dpu_kms->pdev,
> "regdma");
>  	}
> 
> -	dpu_kms->core_client = dpu_power_client_create(&dpu_kms->phandle,
> -					"core");
> -	if (IS_ERR_OR_NULL(dpu_kms->core_client)) {
> -		rc = PTR_ERR(dpu_kms->core_client);
> -		if (!dpu_kms->core_client)
> -			rc = -EINVAL;
> -		DPU_ERROR("dpu power client create failed: %d\n", rc);
> -		dpu_kms->core_client = NULL;
> -		goto error;
> -	}
> -
>  	pm_runtime_get_sync(&dpu_kms->pdev->dev);
> 
>  	_dpu_kms_core_hw_rev_init(dpu_kms);
> @@ -1157,8 +1141,7 @@ static int __maybe_unused 
> dpu_runtime_suspend(struct
> device *dev)
>  		return rc;
>  	}
> 
> -	rc = dpu_power_resource_enable(&dpu_kms->phandle,
> -			dpu_kms->core_client, false);
> +	rc = dpu_power_resource_enable(&dpu_kms->phandle, false);
>  	if (rc)
>  		DPU_ERROR("resource disable failed: %d\n", rc);
> 
> @@ -1189,8 +1172,7 @@ static int __maybe_unused 
> dpu_runtime_resume(struct
> device *dev)
>  		return rc;
>  	}
> 
> -	rc = dpu_power_resource_enable(&dpu_kms->phandle,
> -			dpu_kms->core_client, true);
> +	rc = dpu_power_resource_enable(&dpu_kms->phandle, true);
>  	if (rc)
>  		DPU_ERROR("resource enable failed: %d\n", rc);
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> index 2a3625eef6d3..f2c78deb0854 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
> @@ -114,7 +114,6 @@ struct dpu_kms {
>  	struct dpu_mdss_cfg *catalog;
> 
>  	struct dpu_power_handle phandle;
> -	struct dpu_power_client *core_client;
>  	struct dpu_power_event *power_event;
> 
>  	/* directory entry for debugfs */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
> index 8c6f92aaaf87..8e64f0a52147 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
> @@ -35,59 +35,11 @@ static void dpu_power_event_trigger_locked(struct
> dpu_power_handle *phandle,
>  	}
>  }
> 
> -struct dpu_power_client *dpu_power_client_create(
> -	struct dpu_power_handle *phandle, char *client_name)
> -{
> -	struct dpu_power_client *client;
> -	static u32 id;
> -
> -	if (!client_name || !phandle) {
> -		pr_err("client name is null or invalid power data\n");
> -		return ERR_PTR(-EINVAL);
> -	}
> -
> -	client = kzalloc(sizeof(struct dpu_power_client), GFP_KERNEL);
> -	if (!client)
> -		return ERR_PTR(-ENOMEM);
> -
> -	mutex_lock(&phandle->phandle_lock);
> -	strlcpy(client->name, client_name, MAX_CLIENT_NAME_LEN);
> -	client->usecase_ndx = VOTE_INDEX_DISABLE;
> -	client->id = id;
> -	client->active = true;
> -	pr_debug("client %s created:%pK id :%d\n", client_name,
> -		client, id);
> -	id++;
> -	list_add(&client->list, &phandle->power_client_clist);
> -	mutex_unlock(&phandle->phandle_lock);
> -
> -	return client;
> -}
> -
> -void dpu_power_client_destroy(struct dpu_power_handle *phandle,
> -	struct dpu_power_client *client)
> -{
> -	if (!client  || !phandle) {
> -		pr_err("reg bus vote: invalid client handle\n");
> -	} else if (!client->active) {
> -		pr_err("dpu power deinit already done\n");
> -		kfree(client);
> -	} else {
> -		pr_debug("bus vote client %s destroyed:%pK id:%u\n",
> -			client->name, client, client->id);
> -		mutex_lock(&phandle->phandle_lock);
> -		list_del_init(&client->list);
> -		mutex_unlock(&phandle->phandle_lock);
> -		kfree(client);
> -	}
> -}
> -
>  void dpu_power_resource_init(struct platform_device *pdev,
>  	struct dpu_power_handle *phandle)
>  {
>  	phandle->dev = &pdev->dev;
> 
> -	INIT_LIST_HEAD(&phandle->power_client_clist);
>  	INIT_LIST_HEAD(&phandle->event_list);
> 
>  	mutex_init(&phandle->phandle_lock);
> @@ -96,7 +48,6 @@ void dpu_power_resource_init(struct platform_device
> *pdev,
>  void dpu_power_resource_deinit(struct platform_device *pdev,
>  	struct dpu_power_handle *phandle)
>  {
> -	struct dpu_power_client *curr_client, *next_client;
>  	struct dpu_power_event *curr_event, *next_event;
> 
>  	if (!phandle || !pdev) {
> @@ -105,15 +56,6 @@ void dpu_power_resource_deinit(struct 
> platform_device
> *pdev,
>  	}
> 
>  	mutex_lock(&phandle->phandle_lock);
> -	list_for_each_entry_safe(curr_client, next_client,
> -			&phandle->power_client_clist, list) {
> -		pr_err("client:%s-%d still registered with refcount:%d\n",
> -				curr_client->name, curr_client->id,
> -				curr_client->refcount);
> -		curr_client->active = false;
> -		list_del(&curr_client->list);
> -	}
> -
>  	list_for_each_entry_safe(curr_event, next_event,
>  			&phandle->event_list, list) {
>  		pr_err("event:%d, client:%s still registered\n",
> @@ -125,53 +67,21 @@ void dpu_power_resource_deinit(struct 
> platform_device
> *pdev,
>  	mutex_unlock(&phandle->phandle_lock);
>  }
> 
> -int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> -	struct dpu_power_client *pclient, bool enable)
> +int dpu_power_resource_enable(struct dpu_power_handle *phandle, bool
> enable)
>  {
> -	bool changed = false;
> -	u32 max_usecase_ndx = VOTE_INDEX_DISABLE, prev_usecase_ndx;
> -	struct dpu_power_client *client;
>  	u32 event_type;
> 
> -	if (!phandle || !pclient) {
> +	if (!phandle) {
>  		pr_err("invalid input argument\n");
>  		return -EINVAL;
>  	}
> 
>  	mutex_lock(&phandle->phandle_lock);
> -	if (enable)
> -		pclient->refcount++;
> -	else if (pclient->refcount)
> -		pclient->refcount--;
> -
> -	if (pclient->refcount)
> -		pclient->usecase_ndx = VOTE_INDEX_LOW;
> -	else
> -		pclient->usecase_ndx = VOTE_INDEX_DISABLE;
> -
> -	list_for_each_entry(client, &phandle->power_client_clist, list) {
> -		if (client->usecase_ndx < VOTE_INDEX_MAX &&
> -		    client->usecase_ndx > max_usecase_ndx)
> -			max_usecase_ndx = client->usecase_ndx;
> -	}
> -
> -	if (phandle->current_usecase_ndx != max_usecase_ndx) {
> -		changed = true;
> -		prev_usecase_ndx = phandle->current_usecase_ndx;
> -		phandle->current_usecase_ndx = max_usecase_ndx;
> -	}
> -
> -	pr_debug("%pS: changed=%d current idx=%d request client %s id:%u
> enable:%d refcount:%d\n",
> -		__builtin_return_address(0), changed, max_usecase_ndx,
> -		pclient->name, pclient->id, enable, pclient->refcount);
> -
> -	if (!changed)
> -		goto end;
> 
>  	event_type = enable ? DPU_POWER_EVENT_ENABLE :
> DPU_POWER_EVENT_DISABLE;
> 
>  	dpu_power_event_trigger_locked(phandle,	event_type);
> -end:
> +
>  	mutex_unlock(&phandle->phandle_lock);
>  	return 0;
>  }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
> index f627ae28ec68..124ebc93c877 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
> @@ -27,30 +27,6 @@
>  #define DPU_POWER_EVENT_DISABLE	BIT(0)
>  #define DPU_POWER_EVENT_ENABLE	BIT(1)
> 
> -/**
> - * mdss_bus_vote_type: register bus vote type
> - * VOTE_INDEX_DISABLE: removes the client vote
> - * VOTE_INDEX_LOW: keeps the lowest vote for register bus
> - * VOTE_INDEX_MAX: invalid
> - */
> -enum mdss_bus_vote_type {
> -	VOTE_INDEX_DISABLE,
> -	VOTE_INDEX_LOW,
> -	VOTE_INDEX_MAX,
> -};
> -
> -/**
> - * enum dpu_power_handle_data_bus_client - type of axi bus clients
> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT: core real-time bus client
> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT: core non-real-time bus 
> client
> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX: maximum number of bus client
> type
> - */
> -enum dpu_power_handle_data_bus_client {
> -	DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT,
> -	DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT,
> -	DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX
> -};
> -
>  /**
>   * enum DPU_POWER_HANDLE_DBUS_ID - data bus identifier
>   * @DPU_POWER_HANDLE_DBUS_ID_MNOC: DPU/MNOC data bus
> @@ -64,31 +40,6 @@ enum DPU_POWER_HANDLE_DBUS_ID {
>  	DPU_POWER_HANDLE_DBUS_ID_MAX,
>  };
> 
> -/**
> - * struct dpu_power_client: stores the power client for dpu driver
> - * @name:	name of the client
> - * @usecase_ndx: current regs bus vote type
> - * @refcount:	current refcount if multiple modules are using same
> - *              same client for enable/disable. Power module will
> - *              aggregate the refcount and vote accordingly for this
> - *              client.
> - * @id:		assigned during create. helps for debugging.
> - * @list:	list to attach power handle master list
> - * @ab:         arbitrated bandwidth for each bus client
> - * @ib:         instantaneous bandwidth for each bus client
> - * @active:	inidcates the state of dpu power handle
> - */
> -struct dpu_power_client {
> -	char name[MAX_CLIENT_NAME_LEN];
> -	short usecase_ndx;
> -	short refcount;
> -	u32 id;
> -	struct list_head list;
> -	u64 ab[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX];
> -	u64 ib[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX];
> -	bool active;
> -};
> -
>  /*
>   * struct dpu_power_event - local event registration structure
>   * @client_name: name of the client registering
> @@ -109,14 +60,12 @@ struct dpu_power_event {
> 
>  /**
>   * struct dpu_power_handle: power handle main struct
> - * @client_clist: master list to store all clients
>   * @phandle_lock: lock to synchronize the enable/disable
>   * @dev: pointer to device structure
>   * @usecase_ndx: current usecase index
>   * @event_list: current power handle event list
>   */
>  struct dpu_power_handle {
> -	struct list_head power_client_clist;
>  	struct mutex phandle_lock;
>  	struct device *dev;
>  	u32 current_usecase_ndx;
> @@ -141,47 +90,14 @@ void dpu_power_resource_init(struct 
> platform_device
> *pdev,
>  void dpu_power_resource_deinit(struct platform_device *pdev,
>  	struct dpu_power_handle *pdata);
> 
> -/**
> - * dpu_power_client_create() - create the client on power handle
> - * @pdata:  power handle containing the resources
> - * @client_name: new client name for registration
> - *
> - * Return: error code.
> - */
> -struct dpu_power_client *dpu_power_client_create(struct 
> dpu_power_handle
> *pdata,
> -	char *client_name);
> -
> -/**
> - * dpu_power_client_destroy() - destroy the client on power handle
> - * @pdata:  power handle containing the resources
> - * @client_name: new client name for registration
> - *
> - * Return: none
> - */
> -void dpu_power_client_destroy(struct dpu_power_handle *phandle,
> -	struct dpu_power_client *client);
> -
>  /**
>   * dpu_power_resource_enable() - enable/disable the power resources
>   * @pdata:  power handle containing the resources
> - * @client: client information to enable/disable its vote
>   * @enable: boolean request for enable/disable
>   *
>   * Return: error code.
>   */
> -int dpu_power_resource_enable(struct dpu_power_handle *pdata,
> -	struct dpu_power_client *pclient, bool enable);
> -
> -/**
> - * dpu_power_data_bus_bandwidth_ctrl() - control data bus bandwidth
> enable
> - * @phandle:  power handle containing the resources
> - * @client: client information to bandwidth control
> - * @enable: true to enable bandwidth for data base
> - *
> - * Return: none
> - */
> -void dpu_power_data_bus_bandwidth_ctrl(struct dpu_power_handle 
> *phandle,
> -		struct dpu_power_client *pclient, int enable);
> +int dpu_power_resource_enable(struct dpu_power_handle *pdata, bool
> enable);
> 
>  /**
>   * dpu_power_handle_register_event - register a callback function for 
> an
> event.

-- 
Jeykumar S
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

  parent reply	other threads:[~2018-11-13  0:57 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-12 19:42 [PATCH 00/12] drm/msm: dpu: Clean up runtime power handling Sean Paul
2018-11-12 19:42 ` [PATCH 02/12] drm/msm: dpu: Remove unused trace_dpu_perf_update_bus() Sean Paul
     [not found]   ` <20181112194222.193546-3-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  0:48     ` Jeykumar Sankaran
2018-11-12 19:42 ` [PATCH 04/12] drm/msm: dpu: Don't use power_event for vbif_init_memtypes Sean Paul
     [not found]   ` <20181112194222.193546-5-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  1:01     ` Jeykumar Sankaran
     [not found]       ` <488b7be307ca7f5db3b7c22c62a79e89-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-11-13 15:24         ` [PATCH v2 " Sean Paul
2018-11-13  1:06     ` [PATCH " Jeykumar Sankaran
2018-11-13  1:31       ` Jeykumar Sankaran
2018-11-12 19:42 ` [PATCH 05/12] drm/msm: dpu: Handle crtc pm_runtime_resume() directly Sean Paul
2018-11-13  1:20   ` Jeykumar Sankaran
     [not found]     ` <9d648caa250f75a9870e77de283b2927-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-11-13 15:16       ` Sean Paul
2018-11-12 19:42 ` [PATCH 06/12] drm/msm: dpu: Remove power_handle from core_perf Sean Paul
     [not found]   ` <20181112194222.193546-7-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  1:25     ` Jeykumar Sankaran
2018-11-12 19:42 ` [PATCH 08/12] drm/msm: dpu: Move DPU_POWER_HANDLE_DBUS_ID to core_perf Sean Paul
2018-11-13  1:27   ` Jeykumar Sankaran
2018-11-12 19:42 ` [PATCH 09/12] drm/msm: dpu: Remove dpu_power_handle Sean Paul
     [not found]   ` <20181112194222.193546-10-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  1:30     ` Jeykumar Sankaran
2018-11-12 19:42 ` [PATCH 11/12] drm/msm: dpu: Add ->enabled to dpu_encoder_virt Sean Paul
     [not found]   ` <20181112194222.193546-12-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  1:43     ` Jeykumar Sankaran
     [not found]       ` <848efa69c74b25ee0845e02dc4d19d61-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-11-13 15:19         ` Sean Paul
     [not found] ` <20181112194222.193546-1-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-12 19:42   ` [PATCH 01/12] drm/msm: dpu: Remove dpu_power_handle_get_dbus_name() Sean Paul
     [not found]     ` <20181112194222.193546-2-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  0:37       ` Jeykumar Sankaran
2018-11-12 19:42   ` [PATCH 03/12] drm/msm: dpu: Remove dpu_power_client Sean Paul
     [not found]     ` <20181112194222.193546-4-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  0:57       ` Jeykumar Sankaran [this message]
2018-11-12 19:42   ` [PATCH 07/12] drm/msm: dpu: Include dpu_io_util.h directly in dpu_kms.h Sean Paul
     [not found]     ` <20181112194222.193546-8-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  1:26       ` Jeykumar Sankaran
2018-11-12 19:42   ` [PATCH 10/12] drm/msm: dpu: Fix typo in dpu_encoder Sean Paul
     [not found]     ` <20181112194222.193546-11-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  1:32       ` Jeykumar Sankaran
2018-11-12 19:42   ` [PATCH 12/12] drm/msm: dpu: Move crtc runtime resume to encoder Sean Paul
     [not found]     ` <20181112194222.193546-13-sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
2018-11-13  1:47       ` Jeykumar Sankaran
     [not found]         ` <883389e20cc26db9071884be7b0802e7-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-11-13 15:22           ` Sean Paul
2018-11-13 15:55   ` [PATCH v2 13/12] drm/msm: dpu: Don't drop locks in crtc_vblank_enable Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1b4f2636f7c924ff13da0e3637e4854d@codeaurora.org \
    --to=jsanka-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox