[PATCH AUTOSEL 4.19 173/205] ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value

[PATCH AUTOSEL 4.19 173/205] ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value

[Sasha Levin]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit bd73a3dd257fb838bd456a18eeee0ef0224b7a40 ]

while compiling an ipq4019 target, dtc will complain:
regulator@b089000 unit address format error, expected "2089000"

The saw0 regulator reg value seems to be
copied and pasted from qcom-ipq8064.dtsi.

This patch fixes the reg value to match that of the
unit address which in turn silences the warning.
(There is no driver for qcom,saw2 right now.
So this went unnoticed)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 54d056b01bb51..8328ad589e2ba 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -313,7 +313,7 @@
 
                 saw0: regulator@b089000 {
                         compatible = "qcom,saw2";
-                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
                         regulator;
                 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 174/205] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit e11bbcedecae85ce60a5d99ea03528c2d6f867e0 ]

The function clk_round_rate() is defined to return a "long", not an
"unsigned long".  That's because it might return a negative error
code.  Change the call in geni_se_clk_tbl_get() to check for errors.

While we're at it, get rid of a useless init of "freq".

NOTE: overall the idea that we should iterate over clk_round_rate() to
try to reconstruct a table already present in the clock driver is
questionable.  Specifically:
- This method relies on "clk_round_rate()" rounding up.
- This method only works if the table is sorted and has no duplicates.
...this patch doesn't try to fix those problems, it just makes the
error handling more correct.

Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/qcom-geni-se.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index feed3db21c108..1b19b8428c4ac 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -513,7 +513,7 @@ EXPORT_SYMBOL(geni_se_resources_on);
  */
 int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
 {
-	unsigned long freq = 0;
+	long freq = 0;
 	int i;
 
 	if (se->clk_perf_tbl) {
@@ -529,7 +529,7 @@ int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
 
 	for (i = 0; i < MAX_CLK_PERF_LEVEL; i++) {
 		freq = clk_round_rate(se->clk, freq + 1);
-		if (!freq || freq == se->clk_perf_tbl[i - 1])
+		if (freq <= 0 || freq == se->clk_perf_tbl[i - 1])
 			break;
 		se->clk_perf_tbl[i] = freq;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 175/205] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 867d4aa7013fdee8b962cde1711f96c8dd86d926 ]

The geni_se_clk_freq_match() has some strange semantics.  Specifically
it is defined with two modes:
1. It can find a clock that's an exact multiple of the requested rate
2. It can find a non-exact match but it can't handle multiples then

...but callers should always be able to handle a clock that is a
multiple of the requested clock so mode #2 doesn't really make sense.
Let's change the semantics so that the non-exact match can also accept
multiples and then change the code to handle that.

The only caller of this code is the unlanded SPI driver [1] which
currently passes "exact = True", thus it should be safe to change the
semantics in this way.  ...and, in fact, the SPI driver should likely
be modified to pass "exact = False" (with the new semantics) since
that will allow it to work with SPI devices that request a clock rate
that doesn't exactly match a rate we can make.

[1] https://lkml.kernel.org/r/1535107336-2214-1-git-send-email-dkota@codeaurora.org

Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/qcom-geni-se.c | 37 ++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 1b19b8428c4ac..ee89ffb6dde84 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -544,16 +544,17 @@ EXPORT_SYMBOL(geni_se_clk_tbl_get);
  * @se:		Pointer to the concerned serial engine.
  * @req_freq:	Requested clock frequency.
  * @index:	Index of the resultant frequency in the table.
- * @res_freq:	Resultant frequency which matches or is closer to the
- *		requested frequency.
+ * @res_freq:	Resultant frequency of the source clock.
  * @exact:	Flag to indicate exact multiple requirement of the requested
  *		frequency.
  *
- * This function is called by the protocol drivers to determine the matching
- * or exact multiple of the requested frequency, as provided by the serial
- * engine clock in order to meet the performance requirements. If there is
- * no matching or exact multiple of the requested frequency found, then it
- * selects the closest floor frequency, if exact flag is not set.
+ * This function is called by the protocol drivers to determine the best match
+ * of the requested frequency as provided by the serial engine clock in order
+ * to meet the performance requirements.
+ *
+ * If we return success:
+ * - if @exact is true  then @res_freq / <an_integer> == @req_freq
+ * - if @exact is false then @res_freq / <an_integer> <= @req_freq
  *
  * Return: 0 on success, standard Linux error codes on failure.
  */
@@ -564,6 +565,9 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
 	unsigned long *tbl;
 	int num_clk_levels;
 	int i;
+	unsigned long best_delta;
+	unsigned long new_delta;
+	unsigned int divider;
 
 	num_clk_levels = geni_se_clk_tbl_get(se, &tbl);
 	if (num_clk_levels < 0)
@@ -572,18 +576,21 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
 	if (num_clk_levels == 0)
 		return -EINVAL;
 
-	*res_freq = 0;
+	best_delta = ULONG_MAX;
 	for (i = 0; i < num_clk_levels; i++) {
-		if (!(tbl[i] % req_freq)) {
+		divider = DIV_ROUND_UP(tbl[i], req_freq);
+		new_delta = req_freq - tbl[i] / divider;
+		if (new_delta < best_delta) {
+			/* We have a new best! */
 			*index = i;
 			*res_freq = tbl[i];
-			return 0;
-		}
 
-		if (!(*res_freq) || ((tbl[i] > *res_freq) &&
-				     (tbl[i] < req_freq))) {
-			*index = i;
-			*res_freq = tbl[i];
+			/* If the new best is exact then we're done */
+			if (new_delta == 0)
+				return 0;
+
+			/* Record how close we got */
+			best_delta = new_delta;
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 176/205] soc: qcom: wcnss_ctrl: Avoid string overflow

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@linaro.org>

[ Upstream commit 4c96ed170d658d8826d94edec8ac93ee777981a2 ]

'chinfo.name' is used as a NUL-terminated string, but using strncpy() with
the length equal to the buffer size may result in lack of the termination:

drivers//soc/qcom/wcnss_ctrl.c: In function 'qcom_wcnss_open_channel':
drivers//soc/qcom/wcnss_ctrl.c:284:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  strncpy(chinfo.name, name, sizeof(chinfo.name));
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This changes it to use the safer strscpy() instead.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/wcnss_ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index df3ccb30bc2dd..373400dd816d6 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -281,7 +281,7 @@ struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name, rp
 	struct rpmsg_channel_info chinfo;
 	struct wcnss_ctrl *_wcnss = wcnss;
 
-	strncpy(chinfo.name, name, sizeof(chinfo.name));
+	strscpy(chinfo.name, name, sizeof(chinfo.name));
 	chinfo.src = RPMSG_ADDR_ANY;
 	chinfo.dst = RPMSG_ADDR_ANY;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 177/205] soc: qcom: apr: Avoid string overflow

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@linaro.org>

[ Upstream commit 4fadb26574cb74e5de079dd384f25f44f4fb3ec3 ]

'adev->name' is used as a NUL-terminated string, but using strncpy() with the
length equal to the buffer size may result in lack of the termination:

In function 'apr_add_device',
    inlined from 'of_register_apr_devices' at drivers//soc/qcom/apr.c:264:7,
    inlined from 'apr_probe' at drivers//soc/qcom/apr.c:290:2:
drivers//soc/qcom/apr.c:222:3: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(adev->name, np->name, APR_NAME_SIZE);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This changes it to use the safer strscpy() instead.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/apr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 57af8a5373325..ee9197f5aae96 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -219,9 +219,9 @@ static int apr_add_device(struct device *dev, struct device_node *np,
 	adev->domain_id = id->domain_id;
 	adev->version = id->svc_version;
 	if (np)
-		strncpy(adev->name, np->name, APR_NAME_SIZE);
+		strscpy(adev->name, np->name, APR_NAME_SIZE);
 	else
-		strncpy(adev->name, id->name, APR_NAME_SIZE);
+		strscpy(adev->name, id->name, APR_NAME_SIZE);
 
 	dev_set_name(&adev->dev, "aprsvc:%s:%x:%x", adev->name,
 		     id->domain_id, id->svc_id);
-- 
2.20.1

[PATCH AUTOSEL 4.19 178/205] drivers: qcom: rpmh-rsc: clear wait_for_compl after use

[Sasha Levin]

From: Lina Iyer <ilina@codeaurora.org>

[ Upstream commit 09e97b6c8754c91470455e69ebd827b741f80af5 ]

The wait_for_compl register ensures the request sequence is maintained
when sending requests from the TCS. Clear the register after sending
active request and during invalidate of the sleep and wake TCS.

Reported-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index ee75da66d64bf..75bd9a83aef00 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -121,6 +121,7 @@ static int tcs_invalidate(struct rsc_drv *drv, int type)
 			return -EAGAIN;
 		}
 		write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, m, 0);
+		write_tcs_reg_sync(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, m, 0);
 	}
 	bitmap_zero(tcs->slots, MAX_TCS_SLOTS);
 	spin_unlock(&tcs->lock);
@@ -239,6 +240,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 skip:
 		/* Reclaim the TCS */
 		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
+		write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, i, 0);
 		write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
 		spin_lock(&drv->lock);
 		clear_bit(i, drv->tcs_in_use);
-- 
2.20.1