Re: [PATCH 3/6] Revert "phy: qcom-qmp: Correct ready status, again"

[Paolo Pisati <p.pisati@gmail.com>]

On Thu, Dec 05, 2019 at 11:07:05PM -0800, Bjorn Andersson wrote:
> On Thu 05 Dec 08:15 PST 2019, Paolo Pisati wrote:
> 
> > This reverts commit 14ced7e3a1ae9bed7051df3718c8c7b583854a5c.
> > 
> > Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
> 
> Thanks for the patch Paolo, but reverting this commit means we're
> checking for the wrong status bit and thereby relies on timing of that
> bit having an appropriate value again.
> 
> The problem at hand seems to be that some resources are missing while
> trying to initialize the PHY, which causes it to not become ready. I saw
> the same problem when bringing up PCIe on SDM845, but failed to validate
> MSM8996, as this was not booting since mid-summer.
> 
> I verified that this is the case by applying:
> https://lore.kernel.org/linux-arm-msm/20191107000917.1092409-4-bjorn.andersson@linaro.org/

Thanks Bjorn,

indeed replacing the revert and leaving the rest of the series intact, my db820c
boots fine.

One thing though - i removed the =y config changes, and now the board crash
while, it appears, powering on qmp-phy - no stacktrace, unfortunately:

...
[  OK  ] Reached target Local File Systems (Pre).
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started udev Kernel Device Manager.
[   13.550757] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
[   13.552251] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
[   13.580749] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
[   13.582802] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
[   13.595811] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
[   13.596502] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[   13.636319] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
[   13.638919] ufshcd-qcom 624000.ufshc: Initialization failed
[  OK  ] Found device /dev/ttyMSM0.
[   13.675328] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
[   13.693300] qcom-qmp-phy 34000.phy: phy common block init timed-out
[   13.693390] phy phy-34000.phy.2: phy poweron failed --> -110
[   13.698831] qcom-pcie 600000.pcie: cannot initialize host

Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
S - IMAGE_VARIANT_STRING=M8996LAB
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
S - Boot Interface: UFS
S - Secure Boot: Off
...
- 
bye,
p.