[PATCH AUTOSEL 4.14 019/130] media: venus: core: Fix msm8996 frequency table

[PATCH AUTOSEL 4.14 019/130] media: venus: core: Fix msm8996 frequency table

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit c690435ed07901737e5c007a65ec59f53b33eb71 ]

In downstream driver, there are two frequency tables defined,
one for the encoder and one for the decoder:

/* Encoders /
<972000 490000000 0x55555555>, / 4k UHD @ 30 /
<489600 320000000 0x55555555>, / 1080p @ 60 /
<244800 150000000 0x55555555>, / 1080p @ 30 /
<108000 75000000 0x55555555>, / 720p @ 30 */

/* Decoders /
<1944000 490000000 0xffffffff>, / 4k UHD @ 60 /
< 972000 320000000 0xffffffff>, / 4k UHD @ 30 /
< 489600 150000000 0xffffffff>, / 1080p @ 60 /
< 244800 75000000 0xffffffff>; / 1080p @ 30 */

It shows that encoder always needs a higher clock than decoder.

In current venus driver, the unified frequency table is aligned
with the downstream decoder table which causes performance issues
in encoding scenarios. Fix that by aligning frequency table on
worst case (encoding).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 769e9e68562df..9360b36b82cd8 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -345,10 +345,11 @@ static const struct venus_resources msm8916_res = {
 };
 
 static const struct freq_tbl msm8996_freq_table[] = {
-	{ 1944000, 490000000 },	/* 4k UHD @ 60 */
-	{  972000, 320000000 },	/* 4k UHD @ 30 */
-	{  489600, 150000000 },	/* 1080p @ 60 */
-	{  244800,  75000000 },	/* 1080p @ 30 */
+	{ 1944000, 520000000 },	/* 4k UHD @ 60 (decode only) */
+	{  972000, 520000000 },	/* 4k UHD @ 30 */
+	{  489600, 346666667 },	/* 1080p @ 60 */
+	{  244800, 150000000 },	/* 1080p @ 30 */
+	{  108000,  75000000 },	/* 720p @ 30 */
 };
 
 static const struct reg_val msm8996_reg_preset[] = {
-- 
2.20.1

[PATCH AUTOSEL 4.14 064/130] phy: qcom-usb-hs: Fix extcon double register after power cycle

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 64f86b9978449ff05bfa6c64b4c5439e21e9c80b ]

Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().

This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:

	double register detected
	WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0
	Call trace:
	 ...
	 extcon_register_notifier+0x74/0xb8
	 devm_extcon_register_notifier+0x54/0xb8
	 qcom_usb_hs_phy_power_on+0x1fc/0x208
	 ...

... and USB stops working after plugging the cable out and in
another time.

The easiest way to fix this is to make a partial revert of
commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.

Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-usb-hs.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 2d0c70b5589f4..643934a2a70c3 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -159,8 +159,8 @@ static int qcom_usb_hs_phy_power_on(struct phy *phy)
 		/* setup initial state */
 		qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
 					      uphy->vbus_edev);
-		ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
-				EXTCON_USB, &uphy->vbus_notify);
+		ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+					       &uphy->vbus_notify);
 		if (ret)
 			goto err_ulpi;
 	}
@@ -181,6 +181,9 @@ static int qcom_usb_hs_phy_power_off(struct phy *phy)
 {
 	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
 
+	if (uphy->vbus_edev)
+		extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+					   &uphy->vbus_notify);
 	regulator_disable(uphy->v3p3);
 	regulator_disable(uphy->v1p8);
 	clk_disable_unprepare(uphy->sleep_clk);
-- 
2.20.1