[PATCH AUTOSEL 4.19 08/32] drm/msm/mdp5: rate limit pp done timeout warnings

[PATCH AUTOSEL 4.19 08/32] drm/msm/mdp5: rate limit pp done timeout warnings

[Sasha Levin]

From: Brian Masney <masneyb@onstation.org>

[ Upstream commit ef8c9809acb0805c991bba8bdd4749fc46d44a98 ]

Add rate limiting of the 'pp done time out' warnings since these
warnings can quickly fill the dmesg buffer.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
index b1da9ce543790..aa28a43ff842c 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
@@ -1118,8 +1118,8 @@ static void mdp5_crtc_wait_for_pp_done(struct drm_crtc *crtc)
 	ret = wait_for_completion_timeout(&mdp5_crtc->pp_completion,
 						msecs_to_jiffies(50));
 	if (ret == 0)
-		dev_warn(dev->dev, "pp done time out, lm=%d\n",
-			 mdp5_cstate->pipeline.mixer->lm);
+		dev_warn_ratelimited(dev->dev, "pp done time out, lm=%d\n",
+				     mdp5_cstate->pipeline.mixer->lm);
 }
 
 static void mdp5_crtc_wait_for_flush_done(struct drm_crtc *crtc)
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/32] drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI

[Sasha Levin]

From: John Stultz <john.stultz@linaro.org>

[ Upstream commit 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ]

I was hitting kCFI crashes when building with clang, and after
some digging finally narrowed it down to the
dsi_mgr_connector_mode_valid() function being implemented as
returning an int, instead of an enum drm_mode_status.

This patch fixes it, and appeases the opaque word of the kCFI
gods (seriously, clang inlining everything makes the kCFI
backtraces only really rough estimates of where things went
wrong).

Thanks as always to Sami for his help narrowing this down.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: freedreno@lists.freedesktop.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_manager.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index 5224010d90e4a..bd66d2aac41f7 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -328,7 +328,7 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector)
 	return num;
 }
 
-static int dsi_mgr_connector_mode_valid(struct drm_connector *connector,
+static enum drm_mode_status dsi_mgr_connector_mode_valid(struct drm_connector *connector,
 				struct drm_display_mode *mode)
 {
 	int id = dsi_mgr_connector_get_id(connector);
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/32] drm/msm/dsi: save pll state before dsi host is powered off

[Sasha Levin]

From: Harigovindan P <harigovi@codeaurora.org>

[ Upstream commit a1028dcfd0dd97884072288d0c8ed7f30399b528 ]

Save pll state before dsi host is powered off. Without this change
some register values gets resetted.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi_manager.c | 5 +++++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 ----
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index bd66d2aac41f7..b01762a7778ae 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -471,6 +471,7 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge)
 	struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1);
 	struct mipi_dsi_host *host = msm_dsi->host;
 	struct drm_panel *panel = msm_dsi->panel;
+	struct msm_dsi_pll *src_pll;
 	bool is_dual_dsi = IS_DUAL_DSI();
 	int ret;
 
@@ -511,6 +512,10 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge)
 								id, ret);
 	}
 
+	/* Save PLL status if it is a clock source */
+	src_pll = msm_dsi_phy_get_pll(msm_dsi->phy);
+	msm_dsi_pll_save_state(src_pll);
+
 	ret = msm_dsi_host_power_off(host);
 	if (ret)
 		pr_err("%s: host %d power off failed,%d\n", __func__, id, ret);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 9a9fa0c75a131..c630871de7c5b 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -726,10 +726,6 @@ void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
 	if (!phy || !phy->cfg->ops.disable)
 		return;
 
-	/* Save PLL status if it is a clock source */
-	if (phy->usecase != MSM_DSI_PHY_SLAVE)
-		msm_dsi_pll_save_state(phy->pll);
-
 	phy->cfg->ops.disable(phy);
 
 	dsi_phy_regulator_disable(phy);
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/32] drm/msm/dsi/pll: call vco set rate explicitly

[Sasha Levin]

From: Harigovindan P <harigovi@codeaurora.org>

[ Upstream commit c6659785dfb3f8d75f1fe637e4222ff8178f5280 ]

For a given byte clock, if VCO recalc value is exactly same as
vco set rate value, vco_set_rate does not get called assuming
VCO is already set to required value. But Due to GDSC toggle,
VCO values are erased in the HW. To make sure VCO is programmed
correctly, we forcefully call set_rate from vco_prepare.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
index 31205625c7346..21a69b046625a 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -406,6 +406,12 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
 	if (pll_10nm->slave)
 		dsi_pll_enable_pll_bias(pll_10nm->slave);
 
+	rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0);
+	if (rc) {
+		pr_err("vco_set_rate failed, rc=%d\n", rc);
+		return rc;
+	}
+
 	/* Start PLL */
 	pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL,
 		  0x01);
-- 
2.20.1