[PATCH v2 0/3] MHI bus improvements - Part 2

[PATCH v2 0/3] MHI bus improvements - Part 2

[Manivannan Sadhasivam]

Hi Greg,

Here are the remaining patches left from the pervious series. The QRTR MHI
client driver has gone a bit of refactoring after incorporating comments from
Bjorn and Chris while the MHI suspend/resume patch is unmodified.

Dave, can you please look into the QRTR MHI driver and provide some review?

Thanks,
Mani

Changes in v2:

* Moved sock_put() before consume_skb() in QRTR MHI client driver

Manivannan Sadhasivam (3):
  bus: mhi: core: Add support for MHI suspend and resume
  net: qrtr: Add MHI transport layer
  net: qrtr: Do not depend on ARCH_QCOM

 drivers/bus/mhi/core/main.c |   3 +-
 drivers/bus/mhi/core/pm.c   | 143 ++++++++++++++++++++++++++++++++++++
 include/linux/mhi.h         |  19 +++++
 net/qrtr/Kconfig            |   8 +-
 net/qrtr/Makefile           |   2 +
 net/qrtr/mhi.c              | 126 +++++++++++++++++++++++++++++++
 6 files changed, 299 insertions(+), 2 deletions(-)
 create mode 100644 net/qrtr/mhi.c

-- 
2.17.1

[PATCH v2 1/3] bus: mhi: core: Add support for MHI suspend and resume

[Manivannan Sadhasivam]

Add support for MHI suspend and resume states. While at it, the
mhi_notify() function needs to be exported as well.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/main.c |   3 +-
 drivers/bus/mhi/core/pm.c   | 143 ++++++++++++++++++++++++++++++++++++
 include/linux/mhi.h         |  19 +++++
 3 files changed, 164 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index eb4256b81406..3e9aa3b2da77 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -267,7 +267,7 @@ int mhi_destroy_device(struct device *dev, void *data)
 	return 0;
 }
 
-static void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason)
+void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason)
 {
 	struct mhi_driver *mhi_drv;
 
@@ -279,6 +279,7 @@ static void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason)
 	if (mhi_drv->status_cb)
 		mhi_drv->status_cb(mhi_dev, cb_reason);
 }
+EXPORT_SYMBOL_GPL(mhi_notify);
 
 /* Bind MHI channels to MHI devices */
 void mhi_create_devices(struct mhi_controller *mhi_cntrl)
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 52690cb5c89c..3529419d076b 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -669,6 +669,149 @@ void mhi_pm_st_worker(struct work_struct *work)
 	}
 }
 
+int mhi_pm_suspend(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_chan *itr, *tmp;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	enum mhi_pm_state new_state;
+	int ret;
+
+	if (mhi_cntrl->pm_state == MHI_PM_DISABLE)
+		return -EINVAL;
+
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))
+		return -EIO;
+
+	/* Return busy if there are any pending resources */
+	if (atomic_read(&mhi_cntrl->dev_wake))
+		return -EBUSY;
+
+	/* Take MHI out of M2 state */
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	mhi_cntrl->wake_get(mhi_cntrl, false);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 mhi_cntrl->dev_state == MHI_STATE_M0 ||
+				 mhi_cntrl->dev_state == MHI_STATE_M1 ||
+				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	read_lock_bh(&mhi_cntrl->pm_lock);
+	mhi_cntrl->wake_put(mhi_cntrl, false);
+	read_unlock_bh(&mhi_cntrl->pm_lock);
+
+	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		dev_err(dev,
+			"Could not enter M0/M1 state");
+		return -EIO;
+	}
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+
+	if (atomic_read(&mhi_cntrl->dev_wake)) {
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		return -EBUSY;
+	}
+
+	dev_info(dev, "Allowing M3 transition\n");
+	new_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_M3_ENTER);
+	if (new_state != MHI_PM_M3_ENTER) {
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		dev_err(dev,
+			"Error setting to PM state: %s from: %s\n",
+			to_mhi_pm_state_str(MHI_PM_M3_ENTER),
+			to_mhi_pm_state_str(mhi_cntrl->pm_state));
+		return -EIO;
+	}
+
+	/* Set MHI to M3 and wait for completion */
+	mhi_set_mhi_state(mhi_cntrl, MHI_STATE_M3);
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+	dev_info(dev, "Wait for M3 completion\n");
+
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 mhi_cntrl->dev_state == MHI_STATE_M3 ||
+				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		dev_err(dev,
+			"Did not enter M3 state, MHI state: %s, PM state: %s\n",
+			TO_MHI_STATE_STR(mhi_cntrl->dev_state),
+			to_mhi_pm_state_str(mhi_cntrl->pm_state));
+		return -EIO;
+	}
+
+	/* Notify clients about entering LPM */
+	list_for_each_entry_safe(itr, tmp, &mhi_cntrl->lpm_chans, node) {
+		mutex_lock(&itr->mutex);
+		if (itr->mhi_dev)
+			mhi_notify(itr->mhi_dev, MHI_CB_LPM_ENTER);
+		mutex_unlock(&itr->mutex);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mhi_pm_suspend);
+
+int mhi_pm_resume(struct mhi_controller *mhi_cntrl)
+{
+	struct mhi_chan *itr, *tmp;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	enum mhi_pm_state cur_state;
+	int ret;
+
+	dev_info(dev, "Entered with PM state: %s, MHI state: %s\n",
+		 to_mhi_pm_state_str(mhi_cntrl->pm_state),
+		 TO_MHI_STATE_STR(mhi_cntrl->dev_state));
+
+	if (mhi_cntrl->pm_state == MHI_PM_DISABLE)
+		return 0;
+
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state))
+		return -EIO;
+
+	/* Notify clients about exiting LPM */
+	list_for_each_entry_safe(itr, tmp, &mhi_cntrl->lpm_chans, node) {
+		mutex_lock(&itr->mutex);
+		if (itr->mhi_dev)
+			mhi_notify(itr->mhi_dev, MHI_CB_LPM_EXIT);
+		mutex_unlock(&itr->mutex);
+	}
+
+	write_lock_irq(&mhi_cntrl->pm_lock);
+	cur_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_M3_EXIT);
+	if (cur_state != MHI_PM_M3_EXIT) {
+		write_unlock_irq(&mhi_cntrl->pm_lock);
+		dev_info(dev,
+			 "Error setting to PM state: %s from: %s\n",
+			 to_mhi_pm_state_str(MHI_PM_M3_EXIT),
+			 to_mhi_pm_state_str(mhi_cntrl->pm_state));
+		return -EIO;
+	}
+
+	/* Set MHI to M0 and wait for completion */
+	mhi_set_mhi_state(mhi_cntrl, MHI_STATE_M0);
+	write_unlock_irq(&mhi_cntrl->pm_lock);
+
+	ret = wait_event_timeout(mhi_cntrl->state_event,
+				 mhi_cntrl->dev_state == MHI_STATE_M0 ||
+				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
+				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
+
+	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+		dev_err(dev,
+			"Did not enter M0 state, MHI state: %s, PM state: %s\n",
+			TO_MHI_STATE_STR(mhi_cntrl->dev_state),
+			to_mhi_pm_state_str(mhi_cntrl->pm_state));
+		return -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mhi_pm_resume);
+
 int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl)
 {
 	int ret;
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index ad1996001965..a4288f4d656f 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -568,6 +568,13 @@ void mhi_driver_unregister(struct mhi_driver *mhi_drv);
 void mhi_set_mhi_state(struct mhi_controller *mhi_cntrl,
 		       enum mhi_state state);
 
+/**
+ * mhi_notify - Notify the MHI client driver about client device status
+ * @mhi_dev: MHI device instance
+ * @cb_reason: MHI callback reason
+ */
+void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason);
+
 /**
  * mhi_prepare_for_power_up - Do pre-initialization before power up.
  *                            This is optional, call this before power up if
@@ -604,6 +611,18 @@ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful);
  */
 void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl);
 
+/**
+ * mhi_pm_suspend - Move MHI into a suspended state
+ * @mhi_cntrl: MHI controller
+ */
+int mhi_pm_suspend(struct mhi_controller *mhi_cntrl);
+
+/**
+ * mhi_pm_resume - Resume MHI from suspended state
+ * @mhi_cntrl: MHI controller
+ */
+int mhi_pm_resume(struct mhi_controller *mhi_cntrl);
+
 /**
  * mhi_download_rddm_img - Download ramdump image from device for
  *                         debugging purpose.
-- 
2.17.1

[PATCH v2 2/3] net: qrtr: Add MHI transport layer

[Manivannan Sadhasivam]

MHI is the transport layer used for communicating to the external modems.
Hence, this commit adds MHI transport layer support to QRTR for
transferring the QMI messages over IPC Router.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 net/qrtr/Kconfig  |   7 +++
 net/qrtr/Makefile |   2 +
 net/qrtr/mhi.c    | 126 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 135 insertions(+)
 create mode 100644 net/qrtr/mhi.c

diff --git a/net/qrtr/Kconfig b/net/qrtr/Kconfig
index 63f89cc6e82c..8eb876471564 100644
--- a/net/qrtr/Kconfig
+++ b/net/qrtr/Kconfig
@@ -29,4 +29,11 @@ config QRTR_TUN
 	  implement endpoints of QRTR, for purpose of tunneling data to other
 	  hosts or testing purposes.
 
+config QRTR_MHI
+	tristate "MHI IPC Router channels"
+	depends on MHI_BUS
+	help
+	  Say Y here to support MHI based ipcrouter channels. MHI is the
+	  transport used for communicating to external modems.
+
 endif # QRTR
diff --git a/net/qrtr/Makefile b/net/qrtr/Makefile
index 32d4e923925d..1b1411d158a7 100644
--- a/net/qrtr/Makefile
+++ b/net/qrtr/Makefile
@@ -5,3 +5,5 @@ obj-$(CONFIG_QRTR_SMD) += qrtr-smd.o
 qrtr-smd-y	:= smd.o
 obj-$(CONFIG_QRTR_TUN) += qrtr-tun.o
 qrtr-tun-y	:= tun.o
+obj-$(CONFIG_QRTR_MHI) += qrtr-mhi.o
+qrtr-mhi-y	:= mhi.o
diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
new file mode 100644
index 000000000000..2f604dff93cd
--- /dev/null
+++ b/net/qrtr/mhi.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/mhi.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+
+#include "qrtr.h"
+
+struct qrtr_mhi_dev {
+	struct qrtr_endpoint ep;
+	struct mhi_device *mhi_dev;
+	struct device *dev;
+};
+
+/* From MHI to QRTR */
+static void qcom_mhi_qrtr_dl_callback(struct mhi_device *mhi_dev,
+				      struct mhi_result *mhi_res)
+{
+	struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
+	int rc;
+
+	if (!qdev || mhi_res->transaction_status)
+		return;
+
+	rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
+				mhi_res->bytes_xferd);
+	if (rc == -EINVAL)
+		dev_err(qdev->dev, "invalid ipcrouter packet\n");
+}
+
+/* From QRTR to MHI */
+static void qcom_mhi_qrtr_ul_callback(struct mhi_device *mhi_dev,
+				      struct mhi_result *mhi_res)
+{
+	struct sk_buff *skb = (struct sk_buff *)mhi_res->buf_addr;
+
+	if (skb->sk)
+		sock_put(skb->sk);
+	consume_skb(skb);
+}
+
+/* Send data over MHI */
+static int qcom_mhi_qrtr_send(struct qrtr_endpoint *ep, struct sk_buff *skb)
+{
+	struct qrtr_mhi_dev *qdev = container_of(ep, struct qrtr_mhi_dev, ep);
+	int rc;
+
+	rc = skb_linearize(skb);
+	if (rc) {
+		kfree_skb(skb);
+		return rc;
+	}
+
+	rc = mhi_queue_skb(qdev->mhi_dev, DMA_TO_DEVICE, skb, skb->len,
+			   MHI_EOT);
+	if (rc) {
+		kfree_skb(skb);
+		return rc;
+	}
+
+	if (skb->sk)
+		sock_hold(skb->sk);
+
+	return rc;
+}
+
+static int qcom_mhi_qrtr_probe(struct mhi_device *mhi_dev,
+			       const struct mhi_device_id *id)
+{
+	struct qrtr_mhi_dev *qdev;
+	int rc;
+
+	qdev = devm_kzalloc(&mhi_dev->dev, sizeof(*qdev), GFP_KERNEL);
+	if (!qdev)
+		return -ENOMEM;
+
+	qdev->mhi_dev = mhi_dev;
+	qdev->dev = &mhi_dev->dev;
+	qdev->ep.xmit = qcom_mhi_qrtr_send;
+
+	dev_set_drvdata(&mhi_dev->dev, qdev);
+	rc = qrtr_endpoint_register(&qdev->ep, QRTR_EP_NID_AUTO);
+	if (rc)
+		return rc;
+
+	dev_dbg(qdev->dev, "Qualcomm MHI QRTR driver probed\n");
+
+	return 0;
+}
+
+static void qcom_mhi_qrtr_remove(struct mhi_device *mhi_dev)
+{
+	struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
+
+	qrtr_endpoint_unregister(&qdev->ep);
+	dev_set_drvdata(&mhi_dev->dev, NULL);
+}
+
+static const struct mhi_device_id qcom_mhi_qrtr_id_table[] = {
+	{ .chan = "IPCR" },
+	{}
+};
+MODULE_DEVICE_TABLE(mhi, qcom_mhi_qrtr_id_table);
+
+static struct mhi_driver qcom_mhi_qrtr_driver = {
+	.probe = qcom_mhi_qrtr_probe,
+	.remove = qcom_mhi_qrtr_remove,
+	.dl_xfer_cb = qcom_mhi_qrtr_dl_callback,
+	.ul_xfer_cb = qcom_mhi_qrtr_ul_callback,
+	.id_table = qcom_mhi_qrtr_id_table,
+	.driver = {
+		.name = "qcom_mhi_qrtr",
+	},
+};
+
+module_mhi_driver(qcom_mhi_qrtr_driver);
+
+MODULE_AUTHOR("Chris Lew <clew@codeaurora.org>");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm IPC-Router MHI interface driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

Re: [PATCH v2 2/3] net: qrtr: Add MHI transport layer

[Bjorn Andersson]

On Wed 01 Apr 22:36 PDT 2020, Manivannan Sadhasivam wrote:

> MHI is the transport layer used for communicating to the external modems.
> Hence, this commit adds MHI transport layer support to QRTR for
> transferring the QMI messages over IPC Router.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: netdev@vger.kernel.org
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  net/qrtr/Kconfig  |   7 +++
>  net/qrtr/Makefile |   2 +
>  net/qrtr/mhi.c    | 126 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 135 insertions(+)
>  create mode 100644 net/qrtr/mhi.c
> 
> diff --git a/net/qrtr/Kconfig b/net/qrtr/Kconfig
> index 63f89cc6e82c..8eb876471564 100644
> --- a/net/qrtr/Kconfig
> +++ b/net/qrtr/Kconfig
> @@ -29,4 +29,11 @@ config QRTR_TUN
>  	  implement endpoints of QRTR, for purpose of tunneling data to other
>  	  hosts or testing purposes.
>  
> +config QRTR_MHI
> +	tristate "MHI IPC Router channels"
> +	depends on MHI_BUS
> +	help
> +	  Say Y here to support MHI based ipcrouter channels. MHI is the
> +	  transport used for communicating to external modems.
> +
>  endif # QRTR
> diff --git a/net/qrtr/Makefile b/net/qrtr/Makefile
> index 32d4e923925d..1b1411d158a7 100644
> --- a/net/qrtr/Makefile
> +++ b/net/qrtr/Makefile
> @@ -5,3 +5,5 @@ obj-$(CONFIG_QRTR_SMD) += qrtr-smd.o
>  qrtr-smd-y	:= smd.o
>  obj-$(CONFIG_QRTR_TUN) += qrtr-tun.o
>  qrtr-tun-y	:= tun.o
> +obj-$(CONFIG_QRTR_MHI) += qrtr-mhi.o
> +qrtr-mhi-y	:= mhi.o
> diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
> new file mode 100644
> index 000000000000..2f604dff93cd
> --- /dev/null
> +++ b/net/qrtr/mhi.c
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/mhi.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/skbuff.h>
> +#include <net/sock.h>
> +
> +#include "qrtr.h"
> +
> +struct qrtr_mhi_dev {
> +	struct qrtr_endpoint ep;
> +	struct mhi_device *mhi_dev;
> +	struct device *dev;
> +};
> +
> +/* From MHI to QRTR */
> +static void qcom_mhi_qrtr_dl_callback(struct mhi_device *mhi_dev,
> +				      struct mhi_result *mhi_res)
> +{
> +	struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
> +	int rc;
> +
> +	if (!qdev || mhi_res->transaction_status)
> +		return;
> +
> +	rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
> +				mhi_res->bytes_xferd);
> +	if (rc == -EINVAL)
> +		dev_err(qdev->dev, "invalid ipcrouter packet\n");
> +}
> +
> +/* From QRTR to MHI */
> +static void qcom_mhi_qrtr_ul_callback(struct mhi_device *mhi_dev,
> +				      struct mhi_result *mhi_res)
> +{
> +	struct sk_buff *skb = (struct sk_buff *)mhi_res->buf_addr;
> +
> +	if (skb->sk)
> +		sock_put(skb->sk);
> +	consume_skb(skb);
> +}
> +
> +/* Send data over MHI */
> +static int qcom_mhi_qrtr_send(struct qrtr_endpoint *ep, struct sk_buff *skb)
> +{
> +	struct qrtr_mhi_dev *qdev = container_of(ep, struct qrtr_mhi_dev, ep);
> +	int rc;
> +
> +	rc = skb_linearize(skb);
> +	if (rc) {
> +		kfree_skb(skb);
> +		return rc;
> +	}
> +
> +	rc = mhi_queue_skb(qdev->mhi_dev, DMA_TO_DEVICE, skb, skb->len,
> +			   MHI_EOT);
> +	if (rc) {
> +		kfree_skb(skb);
> +		return rc;
> +	}
> +
> +	if (skb->sk)
> +		sock_hold(skb->sk);
> +
> +	return rc;
> +}
> +
> +static int qcom_mhi_qrtr_probe(struct mhi_device *mhi_dev,
> +			       const struct mhi_device_id *id)
> +{
> +	struct qrtr_mhi_dev *qdev;
> +	int rc;
> +
> +	qdev = devm_kzalloc(&mhi_dev->dev, sizeof(*qdev), GFP_KERNEL);
> +	if (!qdev)
> +		return -ENOMEM;
> +
> +	qdev->mhi_dev = mhi_dev;
> +	qdev->dev = &mhi_dev->dev;
> +	qdev->ep.xmit = qcom_mhi_qrtr_send;
> +
> +	dev_set_drvdata(&mhi_dev->dev, qdev);
> +	rc = qrtr_endpoint_register(&qdev->ep, QRTR_EP_NID_AUTO);
> +	if (rc)
> +		return rc;
> +
> +	dev_dbg(qdev->dev, "Qualcomm MHI QRTR driver probed\n");
> +
> +	return 0;
> +}
> +
> +static void qcom_mhi_qrtr_remove(struct mhi_device *mhi_dev)
> +{
> +	struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
> +
> +	qrtr_endpoint_unregister(&qdev->ep);
> +	dev_set_drvdata(&mhi_dev->dev, NULL);
> +}
> +
> +static const struct mhi_device_id qcom_mhi_qrtr_id_table[] = {
> +	{ .chan = "IPCR" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(mhi, qcom_mhi_qrtr_id_table);
> +
> +static struct mhi_driver qcom_mhi_qrtr_driver = {
> +	.probe = qcom_mhi_qrtr_probe,
> +	.remove = qcom_mhi_qrtr_remove,
> +	.dl_xfer_cb = qcom_mhi_qrtr_dl_callback,
> +	.ul_xfer_cb = qcom_mhi_qrtr_ul_callback,
> +	.id_table = qcom_mhi_qrtr_id_table,
> +	.driver = {
> +		.name = "qcom_mhi_qrtr",
> +	},
> +};
> +
> +module_mhi_driver(qcom_mhi_qrtr_driver);
> +
> +MODULE_AUTHOR("Chris Lew <clew@codeaurora.org>");
> +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
> +MODULE_DESCRIPTION("Qualcomm IPC-Router MHI interface driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.17.1
> 

[PATCH v2 3/3] net: qrtr: Do not depend on ARCH_QCOM

[Manivannan Sadhasivam]

IPC Router protocol is also used by external modems for exchanging the QMI
messages. Hence, it doesn't always depend on Qualcomm platforms. One such
instance is the QCA6390 WLAN device connected to x86 machine.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 net/qrtr/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/qrtr/Kconfig b/net/qrtr/Kconfig
index 8eb876471564..f362ca316015 100644
--- a/net/qrtr/Kconfig
+++ b/net/qrtr/Kconfig
@@ -4,7 +4,6 @@
 
 config QRTR
 	tristate "Qualcomm IPC Router support"
-	depends on ARCH_QCOM || COMPILE_TEST
 	---help---
 	  Say Y if you intend to use Qualcomm IPC router protocol.  The
 	  protocol is used to communicate with services provided by other
-- 
2.17.1

Re: [PATCH v2 0/3] MHI bus improvements - Part 2

[Greg KH]

On Thu, Apr 02, 2020 at 11:06:07AM +0530, Manivannan Sadhasivam wrote:
> Hi Greg,
> 
> Here are the remaining patches left from the pervious series. The QRTR MHI
> client driver has gone a bit of refactoring after incorporating comments from
> Bjorn and Chris while the MHI suspend/resume patch is unmodified.

It's the middle of the merge window, we can't do anything until after
-rc1 is out, so please be patient.

greg k-h

Re: [PATCH v2 0/3] MHI bus improvements - Part 2

[Manivannan Sadhasivam]

Hi Greg,

On Thu, Apr 02, 2020 at 07:55:26AM +0200, Greg KH wrote:
> On Thu, Apr 02, 2020 at 11:06:07AM +0530, Manivannan Sadhasivam wrote:
> > Hi Greg,
> > 
> > Here are the remaining patches left from the pervious series. The QRTR MHI
> > client driver has gone a bit of refactoring after incorporating comments from
> > Bjorn and Chris while the MHI suspend/resume patch is unmodified.
> 
> It's the middle of the merge window, we can't do anything until after
> -rc1 is out, so please be patient.
> 

Can you please look into this series now?

Thanks,
Mani

> greg k-h