[PATCH AUTOSEL 5.11 11/61] scsi: ufs: ufs-qcom: Disable interrupt in reset path

[PATCH AUTOSEL 5.11 11/61] scsi: ufs: ufs-qcom: Disable interrupt in reset path

[Sasha Levin]

From: Nitin Rawat <nitirawa@codeaurora.org>

[ Upstream commit 4a791574a0ccf36eb3a0a46fbd71d2768df3eef9 ]

Disable interrupt in reset path to flush pending IRQ handler in order to
avoid possible NoC issues.

Link: https://lore.kernel.org/r/1614145010-36079-3-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-qcom.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 2206b1e4b774..e55201f64c10 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -253,12 +253,17 @@ static int ufs_qcom_host_reset(struct ufs_hba *hba)
 {
 	int ret = 0;
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	bool reenable_intr = false;
 
 	if (!host->core_reset) {
 		dev_warn(hba->dev, "%s: reset control not set\n", __func__);
 		goto out;
 	}
 
+	reenable_intr = hba->is_irq_enabled;
+	disable_irq(hba->irq);
+	hba->is_irq_enabled = false;
+
 	ret = reset_control_assert(host->core_reset);
 	if (ret) {
 		dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n",
@@ -280,6 +285,11 @@ static int ufs_qcom_host_reset(struct ufs_hba *hba)
 
 	usleep_range(1000, 1100);
 
+	if (reenable_intr) {
+		enable_irq(hba->irq);
+		hba->is_irq_enabled = true;
+	}
+
 out:
 	return ret;
 }
-- 
2.30.1

[PATCH AUTOSEL 5.11 40/61] regulator: qcom-rpmh: Correct the pmic5_hfsmps515 buck

[Sasha Levin]

From: satya priya <skakit@codeaurora.org>

[ Upstream commit e610e072c87a30658479a7b4c51e1801cb3f450c ]

Correct the REGULATOR_LINEAR_RANGE and n_voltges for
pmic5_hfsmps515 buck.

Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1614155592-14060-4-git-send-email-skakit@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 37a2abbe85c7..2351a232d90e 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -726,8 +726,8 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
 static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_ops,
-	.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 16000),
-	.n_voltages = 5,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 235, 16000),
+	.n_voltages = 236,
 	.pmic_mode_map = pmic_mode_map_pmic5_smps,
 	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
 };
-- 
2.30.1

[PATCH AUTOSEL 5.11 41/61] regulator: qcom-rpmh: Use correct buck for S1C regulator

[Sasha Levin]

From: satya priya <skakit@codeaurora.org>

[ Upstream commit dfe03bca8db4957d4b60614ff7df4d136ba90f37 ]

Use correct buck, that is, pmic5_hfsmps515 for S1C regulator
of PM8350C PMIC.

Signed-off-by: satya priya <skakit@codeaurora.org>
Link: https://lore.kernel.org/r/1614155592-14060-7-git-send-email-skakit@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 2351a232d90e..0fd3da36f62e 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -901,7 +901,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
 };
 
 static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
-	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps515, "vdd-s1"),
 	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
 	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
 	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps510, "vdd-s4"),
-- 
2.30.1