[PATCH AUTOSEL 5.17 20/60] soundwire: qcom: adjust autoenumeration timeout

[PATCH AUTOSEL 5.17 20/60] soundwire: qcom: adjust autoenumeration timeout

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 74da272400b46f2e898f115d1b1cd60828766919 ]

Currently timeout for autoenumeration during probe and bus reset is set to
2 secs which is really a big value. This can have an adverse effect on
boot time if the slave device is not ready/reset.
This was the case with wcd938x which was not reset yet but we spent 2
secs waiting in the soundwire controller probe. Reduce this time to
1/10 of Hz which should be good enough time to finish autoenumeration
if any slaves are available on the bus.

Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220506084705.18525-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 54813417ef8e..249f1b69ec94 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -99,7 +99,7 @@
 
 #define SWRM_SPECIAL_CMD_ID	0xF
 #define MAX_FREQ_NUM		1
-#define TIMEOUT_MS		(2 * HZ)
+#define TIMEOUT_MS		100
 #define QCOM_SWRM_MAX_RD_LEN	0x1
 #define QCOM_SDW_MAX_PORTS	14
 #define DEFAULT_CLK_FREQ	9600000
-- 
2.35.1

[PATCH AUTOSEL 5.17 28/60] serial: msm_serial: disable interrupts in __msm_console_write()

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ]

__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.

Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/msm_serial.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 23c94b927776..e676ec761f18 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1599,6 +1599,7 @@ static inline struct uart_port *msm_get_port_from_line(unsigned int line)
 static void __msm_console_write(struct uart_port *port, const char *s,
 				unsigned int count, bool is_uartdm)
 {
+	unsigned long flags;
 	int i;
 	int num_newlines = 0;
 	bool replaced = false;
@@ -1616,6 +1617,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 			num_newlines++;
 	count += num_newlines;
 
+	local_irq_save(flags);
+
 	if (port->sysrq)
 		locked = 0;
 	else if (oops_in_progress)
@@ -1661,6 +1664,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 
 	if (locked)
 		spin_unlock(&port->lock);
+
+	local_irq_restore(flags);
 }
 
 static void msm_console_write(struct console *co, const char *s,
-- 
2.35.1