[PATCH v4 00/13] PM6125 regulator support

[PATCH v4 00/13] PM6125 regulator support

[Iskren Chernev]

This patch series adds SPMI and SMD regulator support for the PM6125 found on
SM4250/SM6115 SoCs from QCom.

This code has been tested on:
* OnePlus Nord N100 (oneplus,billie2, SoC sm4250)
* Redmi 9T (redmi,lemon, SoC sm6115)

The main source used for this change is qpnp pm6125 support patch from caf [1]:

[1]: https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5

v3: https://lkml.org/lkml/2022/7/31/303
v2: https://lkml.org/lkml/2022/7/26/885
v1: https://lkml.org/lkml/2021/8/28/144

Changes from v3:
- fix compilation issue reported by kernel test robot
- reorder HFSMPS/LDO+FTSMPS patches
- add new slew-rate computation for HFSMPS
- add proper pull-down support for new regs
- name new regs/vals after HFSMPS instead of FTSMPS
- address indentation/newline issues reported by Krzysztof
- improve commit messages on SPMI/RPM related patches
Changes from v2:
- split spmi new regulator support in 2 patches
- FTS and LDOs now have set_load and set_pull_down ops
- add better commit messages on spmi patches
- fix sob header order
- fix tested device info (Redmi 9T, NOT Xiaomi 9T)
- improve formatting in spmi binding docs
- sort alphabetically in smd binding docs
- sort alphabetically spmi pmics
- sort alphabetically smd pmics
Changes from v1:
- add dt-bindings
- split SPMI patch into new reg types and the new PMIC
- add correct supply mapping

Iskren Chernev (13):
  dt-bindings: regulator: qcom_spmi: Improve formatting of if-then
    blocks
  dt-bindings: regulator: qcom_spmi: Document PM6125 PMIC
  dt-bindings: regulator: qcom_smd: Sort compatibles alphabetically
  dt-bindings: regulator: qcom_smd: Document PM6125 PMIC
  regulator: qcom_spmi: Add support for HFSMPS regulator type
  regulator: qcom_spmi: Add support for LDO_510 and FTSMPS
  regulator: qcom_spmi: Sort pmics alphabetically (part 1)
  regulator: qcom_spmi: Sort pmics alphabetically (part 2)
  regulator: qcom_spmi: Add PM6125 PMIC support
  regulator: qcom_smd: Sort pmics alphabetically (part 1)
  regulator: qcom_smd: Sort pmics alphabetically (part 2)
  regulator: qcom_smd: Sort pmics alphabetically (part 3)
  regulator: qcom_smd: Add PM6125 RPM regulators

 .../regulator/qcom,smd-rpm-regulator.yaml     |  26 +-
 .../regulator/qcom,spmi-regulator.yaml        |  32 ++
 drivers/regulator/qcom_smd-regulator.c        | 400 ++++++++++--------
 drivers/regulator/qcom_spmi-regulator.c       | 378 ++++++++++++-----
 4 files changed, 551 insertions(+), 285 deletions(-)

-- 
2.37.1

[PATCH v4 01/13] dt-bindings: regulator: qcom_spmi: Improve formatting of if-then blocks

[Iskren Chernev]

Add a newline between if-then blocks for different compatible PMICs.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/regulator/qcom,spmi-regulator.yaml      | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
index 8b7c4af4b551..da644c161e99 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -121,6 +121,7 @@ allOf:
         vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
       patternProperties:
         "^vdd_s[1-6]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -135,6 +136,7 @@ allOf:
         vdd_l4_l6-supply: true
       patternProperties:
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -144,6 +146,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[25]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -153,6 +156,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[1-4]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -172,6 +176,7 @@ allOf:
         vdd_lvs1-supply: true
       patternProperties:
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -181,6 +186,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[1-8]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -196,6 +202,7 @@ allOf:
       patternProperties:
         "^vdd_l[27]-supply$": true
         "^vdd_s[1-4]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -224,6 +231,7 @@ allOf:
         vin_5vs-supply: true
       patternProperties:
         "^vdd_s[1-3]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -242,6 +250,7 @@ allOf:
         vdd_l9_l10_l13_l14_l15_l18-supply: true
       patternProperties:
         "^vdd_s[1-6]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -266,6 +275,7 @@ allOf:
         vdd_lvs_1_2-supply: true
       patternProperties:
         "^vdd_s[1-9][0-2]?-supply$": true
+
   - if:
       properties:
         compatible:
@@ -277,6 +287,7 @@ allOf:
         vdd_l1-supply: true
       patternProperties:
         "^vdd_s[1-3]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -292,6 +303,7 @@ allOf:
       patternProperties:
         "^vdd_l[479]-supply$": true
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:
-- 
2.37.1

[PATCH v4 02/13] dt-bindings: regulator: qcom_spmi: Document PM6125 PMIC

[Iskren Chernev]

Add support for pm6125 compatible string and add relevant supplies in QCom
SPMI regulator documentation.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../regulator/qcom,spmi-regulator.yaml        | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
index da644c161e99..24108d0e4c4e 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -12,6 +12,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - qcom,pm6125-regulators
       - qcom,pm660-regulators
       - qcom,pm660l-regulators
       - qcom,pm8004-regulators
@@ -106,6 +107,25 @@ required:
   - compatible
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6125-regulators
+    then:
+      properties:
+        vdd_l1_l7_l17_l18-supply: true
+        vdd_l2_l3_l4-supply: true
+        vdd_l5_l15_l19_l20_l21_l22-supply: true
+        vdd_l6_l8-supply: true
+        vdd_l9_l11-supply: true
+        vdd_l10_l13_l14-supply: true
+        vdd_l12_l16-supply: true
+        vdd_l23_l24-supply: true
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
   - if:
       properties:
         compatible:
-- 
2.37.1

[PATCH v4 03/13] dt-bindings: regulator: qcom_smd: Sort compatibles alphabetically

[Iskren Chernev]

As requested by Krzysztof Kozlowski.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../regulator/qcom,smd-rpm-regulator.yaml     | 22 +++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index c233461cc980..39802c1223c6 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -24,6 +24,14 @@ description:
 
   For mp5496, s2
 
+  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
+
+  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
+  l12, l13, l14, l15, l16, l17, l18, l19
+
+  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
+
   For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
   l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25,
   l26, l27, l28, lvs1
@@ -52,11 +60,6 @@ description:
   l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
 
-  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
-  l12, l13, l14, l15, l16, l17, l18, l19
-
-  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
-
   For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
   l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
@@ -68,9 +71,6 @@ description:
   For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13
 
-  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
-  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
-
 maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -79,6 +79,9 @@ properties:
   compatible:
     enum:
       - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm2250-regulators
+      - qcom,rpm-pm660-regulators
+      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pm8226-regulators
       - qcom,rpm-pm8841-regulators
       - qcom,rpm-pm8909-regulators
@@ -88,13 +91,10 @@ properties:
       - qcom,rpm-pm8953-regulators
       - qcom,rpm-pm8994-regulators
       - qcom,rpm-pm8998-regulators
-      - qcom,rpm-pm660-regulators
-      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pma8084-regulators
       - qcom,rpm-pmi8994-regulators
       - qcom,rpm-pmi8998-regulators
       - qcom,rpm-pms405-regulators
-      - qcom,rpm-pm2250-regulators
 
 patternProperties:
   ".*-supply$":
-- 
2.37.1

[PATCH v4 04/13] dt-bindings: regulator: qcom_smd: Document PM6125 PMIC

[Iskren Chernev]

Document the pm6125 compatible string and available regulators in the QCom
SMD RPM regulator documentation.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index 39802c1223c6..961eed51912c 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -27,6 +27,9 @@ description:
   For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
 
+  For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9,
+  l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24
+
   For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
   l12, l13, l14, l15, l16, l17, l18, l19
 
@@ -80,6 +83,7 @@ properties:
     enum:
       - qcom,rpm-mp5496-regulators
       - qcom,rpm-pm2250-regulators
+      - qcom,rpm-pm6125-regulators
       - qcom,rpm-pm660-regulators
       - qcom,rpm-pm660l-regulators
       - qcom,rpm-pm8226-regulators
-- 
2.37.1

[PATCH v4 05/13] regulator: qcom_spmi: Add support for HFSMPS regulator type

[Iskren Chernev]

This is preparation for supporing PM6125.

The HFSMPS is a BUCK type regulator with subtype 0x0a, same as the
existing HFS430 regulator.

Even though the HFSMPS and HFS430 share a type and subtype, the HFSMPS has
an updated register map, including different mode values, moved pull down
register, and different slew rate address and formula.

In addition to NORMAL (NPM), FAST (AUTO_LPM) and IDLE (LPM), the
regulator also supports RETENTION and AUTO_RM which are currently
unselectable by the driver.

The inspiration of this is taken from [1].

[1] https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_spmi-regulator.c | 115 +++++++++++++++++++++++-
 1 file changed, 114 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index a2d0292a92fd..04e9845a9300 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -99,6 +99,7 @@ enum spmi_regulator_logical_type {
 	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
 	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426,
 	SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
+	SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS,
 };
 
 enum spmi_regulator_type {
@@ -166,6 +167,7 @@ enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_HFS430		= 0x0a,
 	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
 	SPMI_REGULATOR_SUBTYPE_HT_P600		= 0x3d,
+	SPMI_REGULATOR_SUBTYPE_HFSMPS_510	= 0x0a,
 };
 
 enum spmi_common_regulator_registers {
@@ -193,6 +195,14 @@ enum spmi_ftsmps426_regulator_registers {
 	SPMI_FTSMPS426_REG_VOLTAGE_ULS_MSB	= 0x69,
 };
 
+/*
+ * Third common register layout
+ */
+enum spmi_hfsmps_regulator_registers {
+	SPMI_HFSMPS_REG_STEP_CTRL		= 0x3c,
+	SPMI_HFSMPS_REG_PULL_DOWN		= 0xa0,
+};
+
 enum spmi_vs_registers {
 	SPMI_VS_REG_OCP				= 0x4a,
 	SPMI_VS_REG_SOFT_START			= 0x4c,
@@ -260,6 +270,15 @@ enum spmi_common_control_register_index {
 
 #define SPMI_FTSMPS426_MODE_MASK		0x07
 
+/* Third common regulator mode register values */
+#define SPMI_HFSMPS_MODE_BYPASS_MASK		2
+#define SPMI_HFSMPS_MODE_RETENTION_MASK		3
+#define SPMI_HFSMPS_MODE_LPM_MASK		4
+#define SPMI_HFSMPS_MODE_AUTO_MASK		6
+#define SPMI_HFSMPS_MODE_HPM_MASK		7
+
+#define SPMI_HFSMPS_MODE_MASK			0x07
+
 /* Common regulator pull down control register layout */
 #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK	0x80
 
@@ -305,6 +324,9 @@ enum spmi_common_control_register_index {
 #define SPMI_FTSMPS_STEP_MARGIN_NUM	4
 #define SPMI_FTSMPS_STEP_MARGIN_DEN	5
 
+/* slew_rate has units of uV/us. */
+#define SPMI_HFSMPS_SLEW_RATE_38p4 38400
+
 #define SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK	0x03
 #define SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT	0
 
@@ -1062,6 +1084,23 @@ static unsigned int spmi_regulator_ftsmps426_get_mode(struct regulator_dev *rdev
 	}
 }
 
+static unsigned int spmi_regulator_hfsmps_get_mode(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
+
+	switch (reg) {
+	case SPMI_HFSMPS_MODE_HPM_MASK:
+		return REGULATOR_MODE_NORMAL;
+	case SPMI_HFSMPS_MODE_AUTO_MASK:
+		return REGULATOR_MODE_FAST;
+	default:
+		return REGULATOR_MODE_IDLE;
+	}
+}
+
 static int
 spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
@@ -1108,6 +1147,30 @@ spmi_regulator_ftsmps426_set_mode(struct regulator_dev *rdev, unsigned int mode)
 	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
 }
 
+static int
+spmi_regulator_hfsmps_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_HFSMPS_MODE_MASK;
+	u8 val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = SPMI_HFSMPS_MODE_HPM_MASK;
+		break;
+	case REGULATOR_MODE_FAST:
+		val = SPMI_HFSMPS_MODE_AUTO_MASK;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = SPMI_HFSMPS_MODE_LPM_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
 static int
 spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
 {
@@ -1131,6 +1194,15 @@ static int spmi_regulator_common_set_pull_down(struct regulator_dev *rdev)
 				     mask, mask);
 }
 
+static int spmi_regulator_hfsmps_set_pull_down(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_COMMON_PULL_DOWN_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_HFSMPS_REG_PULL_DOWN,
+				     mask, mask);
+}
+
 static int spmi_regulator_common_set_soft_start(struct regulator_dev *rdev)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
@@ -1465,6 +1537,21 @@ static const struct regulator_ops spmi_hfs430_ops = {
 	.get_mode		= spmi_regulator_ftsmps426_get_mode,
 };
 
+static const struct regulator_ops spmi_hfsmps_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_voltage_sel	= spmi_regulator_ftsmps426_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage_sel	= spmi_regulator_ftsmps426_get_voltage,
+	.map_voltage		= spmi_regulator_single_map_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_hfsmps_set_mode,
+	.get_mode		= spmi_regulator_hfsmps_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_hfsmps_set_pull_down,
+};
+
 /* Maximum possible digital major revision value */
 #define INF 0xFF
 
@@ -1473,7 +1560,8 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(LDO,   HT_P600,  0, INF, HFS430, hfs430, ht_p600, 10000),
 	SPMI_VREG(LDO,   HT_P150,  0, INF, HFS430, hfs430, ht_p150, 10000),
 	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
-	SPMI_VREG(BUCK,  HFS430,   0, INF, HFS430, hfs430, hfs430,  10000),
+	SPMI_VREG(BUCK,  HFS430,   0,   3, HFS430, hfs430, hfs430,  10000),
+	SPMI_VREG(BUCK,  HFSMPS_510, 4, INF, HFSMPS, hfsmps, hfs430, 100000),
 	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
 	SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
 	SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
@@ -1696,6 +1784,26 @@ static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg,
 	return ret;
 }
 
+static int spmi_regulator_init_slew_rate_hfsmps(struct spmi_regulator *vreg)
+{
+	int ret;
+	u8 reg = 0;
+	int delay;
+
+	ret = spmi_vreg_read(vreg, SPMI_HFSMPS_REG_STEP_CTRL, &reg, 1);
+	if (ret) {
+		dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	delay = reg & SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK;
+	delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT;
+
+	vreg->slew_rate = SPMI_HFSMPS_SLEW_RATE_38p4 >> delay;
+
+	return ret;
+}
+
 static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
 				const struct spmi_regulator_init_data *data)
 {
@@ -1846,6 +1954,11 @@ static int spmi_regulator_of_parse(struct device_node *node,
 		if (ret)
 			return ret;
 		break;
+	case SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS:
+		ret = spmi_regulator_init_slew_rate_hfsmps(vreg);
+		if (ret)
+			return ret;
+		break;
 	default:
 		break;
 	}
-- 
2.37.1

[PATCH v4 06/13] regulator: qcom_spmi: Add support for LDO_510 and FTSMPS

[Iskren Chernev]

Add support for LDO_510 and FTSMPS3 regulators, all belonging to register
layout HFSMPS. This is done in preparation for adding support for the
PM6125 PMIC.

For FTSMPS3 and LDO_510, only IDLE and NORMAL modes are selectable (no
FAST).

The inspiration for the magic constants was taken from [1]

[1]: https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_spmi-regulator.c | 38 ++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 04e9845a9300..0763a5b7a2ce 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -99,6 +99,8 @@ enum spmi_regulator_logical_type {
 	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
 	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426,
 	SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
+	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3,
+	SPMI_REGULATOR_LOGICAL_TYPE_LDO_510,
 	SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS,
 };
 
@@ -168,6 +170,16 @@ enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
 	SPMI_REGULATOR_SUBTYPE_HT_P600		= 0x3d,
 	SPMI_REGULATOR_SUBTYPE_HFSMPS_510	= 0x0a,
+	SPMI_REGULATOR_SUBTYPE_FTSMPS_510	= 0x0b,
+	SPMI_REGULATOR_SUBTYPE_LV_P150_510	= 0x71,
+	SPMI_REGULATOR_SUBTYPE_LV_P300_510	= 0x72,
+	SPMI_REGULATOR_SUBTYPE_LV_P600_510	= 0x73,
+	SPMI_REGULATOR_SUBTYPE_N300_510		= 0x6a,
+	SPMI_REGULATOR_SUBTYPE_N600_510		= 0x6b,
+	SPMI_REGULATOR_SUBTYPE_N1200_510	= 0x6c,
+	SPMI_REGULATOR_SUBTYPE_MV_P50_510	= 0x7a,
+	SPMI_REGULATOR_SUBTYPE_MV_P150_510	= 0x7b,
+	SPMI_REGULATOR_SUBTYPE_MV_P600_510	= 0x7d,
 };
 
 enum spmi_common_regulator_registers {
@@ -576,6 +588,14 @@ static struct spmi_voltage_range ht_p600_ranges[] = {
 	SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000),
 };
 
+static struct spmi_voltage_range nldo_510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 320000, 320000, 1304000, 1304000, 8000),
+};
+
+static struct spmi_voltage_range ftsmps510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 300000, 300000, 1372000, 1372000, 4000),
+};
+
 static DEFINE_SPMI_SET_POINTS(pldo);
 static DEFINE_SPMI_SET_POINTS(nldo1);
 static DEFINE_SPMI_SET_POINTS(nldo2);
@@ -598,6 +618,8 @@ static DEFINE_SPMI_SET_POINTS(ht_nldo);
 static DEFINE_SPMI_SET_POINTS(hfs430);
 static DEFINE_SPMI_SET_POINTS(ht_p150);
 static DEFINE_SPMI_SET_POINTS(ht_p600);
+static DEFINE_SPMI_SET_POINTS(nldo_510);
+static DEFINE_SPMI_SET_POINTS(ftsmps510);
 
 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
 				 int len)
@@ -1162,7 +1184,10 @@ spmi_regulator_hfsmps_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		val = SPMI_HFSMPS_MODE_AUTO_MASK;
 		break;
 	case REGULATOR_MODE_IDLE:
-		val = SPMI_HFSMPS_MODE_LPM_MASK;
+		val = vreg->logical_type ==
+				SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3 ?
+			SPMI_HFSMPS_MODE_RETENTION_MASK :
+			SPMI_HFSMPS_MODE_LPM_MASK;
 		break;
 	default:
 		return -EINVAL;
@@ -1637,6 +1662,16 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(ULT_LDO, P300,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
+	SPMI_VREG(LDO, LV_P150_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P300_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P600_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, MV_P50_510,  0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P150_510, 0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P600_510, 0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, N300_510,    0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(LDO, N600_510,    0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(LDO, N1200_510,   0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(FTS, FTSMPS_510,  0, INF, FTSMPS3, hfsmps, ftsmps510, 100000),
 };
 
 static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
@@ -1955,6 +1990,7 @@ static int spmi_regulator_of_parse(struct device_node *node,
 			return ret;
 		break;
 	case SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS:
+	case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3:
 		ret = spmi_regulator_init_slew_rate_hfsmps(vreg);
 		if (ret)
 			return ret;
-- 
2.37.1

[PATCH v4 07/13] regulator: qcom_spmi: Sort pmics alphabetically (part 1)

[Iskren Chernev]

The sorting is split in multiple commits for easier reviewing.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_spmi-regulator.c | 74 ++++++++++++-------------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 0763a5b7a2ce..4c6494e3bbf6 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -2021,43 +2021,6 @@ static int spmi_regulator_of_parse(struct device_node *node,
 	return 0;
 }
 
-static const struct spmi_regulator_data pm8941_regulators[] = {
-	{ "s1", 0x1400, "vdd_s1", },
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0xa000, },
-	{ "l1", 0x4000, "vdd_l1_l3", },
-	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
-	{ "l3", 0x4200, "vdd_l1_l3", },
-	{ "l4", 0x4300, "vdd_l4_l11", },
-	{ "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
-	{ "l6", 0x4500, "vdd_l6_l12_l14_l15", },
-	{ "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
-	{ "l8", 0x4700, "vdd_l8_l16_l18_19", },
-	{ "l9", 0x4800, "vdd_l9_l10_l17_l22", },
-	{ "l10", 0x4900, "vdd_l9_l10_l17_l22", },
-	{ "l11", 0x4a00, "vdd_l4_l11", },
-	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
-	{ "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
-	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
-	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
-	{ "l16", 0x4f00, "vdd_l8_l16_l18_19", },
-	{ "l17", 0x5000, "vdd_l9_l10_l17_l22", },
-	{ "l18", 0x5100, "vdd_l8_l16_l18_19", },
-	{ "l19", 0x5200, "vdd_l8_l16_l18_19", },
-	{ "l20", 0x5300, "vdd_l13_l20_l23_l24", },
-	{ "l21", 0x5400, "vdd_l21", },
-	{ "l22", 0x5500, "vdd_l9_l10_l17_l22", },
-	{ "l23", 0x5600, "vdd_l13_l20_l23_l24", },
-	{ "l24", 0x5700, "vdd_l13_l20_l23_l24", },
-	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
-	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
-	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
-	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
-	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
-	{ }
-};
-
 static const struct spmi_regulator_data pm8226_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
@@ -2134,6 +2097,43 @@ static const struct spmi_regulator_data pm8916_regulators[] = {
 	{ }
 };
 
+static const struct spmi_regulator_data pm8941_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0xa000, },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l11", },
+	{ "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l6", 0x4500, "vdd_l6_l12_l14_l15", },
+	{ "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l8", 0x4700, "vdd_l8_l16_l18_19", },
+	{ "l9", 0x4800, "vdd_l9_l10_l17_l22", },
+	{ "l10", 0x4900, "vdd_l9_l10_l17_l22", },
+	{ "l11", 0x4a00, "vdd_l4_l11", },
+	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
+	{ "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
+	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
+	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
+	{ "l16", 0x4f00, "vdd_l8_l16_l18_19", },
+	{ "l17", 0x5000, "vdd_l9_l10_l17_l22", },
+	{ "l18", 0x5100, "vdd_l8_l16_l18_19", },
+	{ "l19", 0x5200, "vdd_l8_l16_l18_19", },
+	{ "l20", 0x5300, "vdd_l13_l20_l23_l24", },
+	{ "l21", 0x5400, "vdd_l21", },
+	{ "l22", 0x5500, "vdd_l9_l10_l17_l22", },
+	{ "l23", 0x5600, "vdd_l13_l20_l23_l24", },
+	{ "l24", 0x5700, "vdd_l13_l20_l23_l24", },
+	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
+	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
+	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
+	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
+	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
+	{ }
+};
+
 static const struct spmi_regulator_data pm8950_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
-- 
2.37.1

[PATCH v4 08/13] regulator: qcom_spmi: Sort pmics alphabetically (part 2)

[Iskren Chernev]

The sorting is split in multiple commits for easier reviewing.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_spmi-regulator.c | 129 ++++++++++++------------
 1 file changed, 64 insertions(+), 65 deletions(-)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 4c6494e3bbf6..aed818c7a4d4 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -2021,6 +2021,68 @@ static int spmi_regulator_of_parse(struct device_node *node,
 	return 0;
 }
 
+static const struct spmi_regulator_data pm660_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s3", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ "s6", 0x2300, "vdd_s6", },
+	{ "l1", 0x4000, "vdd_l1_l6_l7", },
+	{ "l2", 0x4100, "vdd_l2_l3", },
+	{ "l3", 0x4200, "vdd_l2_l3", },
+	/* l4 is unaccessible on PM660 */
+	{ "l5", 0x4400, "vdd_l5", },
+	{ "l6", 0x4500, "vdd_l1_l6_l7", },
+	{ "l7", 0x4600, "vdd_l1_l6_l7", },
+	{ "l8", 0x4700, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l9", 0x4800, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l10", 0x4900, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l11", 0x4a00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l12", 0x4b00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l13", 0x4c00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l14", 0x4d00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l15", 0x4e00, "vdd_l15_l16_l17_l18_l19", },
+	{ "l16", 0x4f00, "vdd_l15_l16_l17_l18_l19", },
+	{ "l17", 0x5000, "vdd_l15_l16_l17_l18_l19", },
+	{ "l18", 0x5100, "vdd_l15_l16_l17_l18_l19", },
+	{ "l19", 0x5200, "vdd_l15_l16_l17_l18_l19", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm660l_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ "l1", 0x4000, "vdd_l1_l9_l10", },
+	{ "l2", 0x4100, "vdd_l2", },
+	{ "l3", 0x4200, "vdd_l3_l5_l7_l8", },
+	{ "l4", 0x4300, "vdd_l4_l6", },
+	{ "l5", 0x4400, "vdd_l3_l5_l7_l8", },
+	{ "l6", 0x4500, "vdd_l4_l6", },
+	{ "l7", 0x4600, "vdd_l3_l5_l7_l8", },
+	{ "l8", 0x4700, "vdd_l3_l5_l7_l8", },
+	{ "l9", 0x4800, "vdd_l1_l9_l10", },
+	{ "l10", 0x4900, "vdd_l1_l9_l10", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8004_regulators[] = {
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8005_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ }
+};
+
 static const struct spmi_regulator_data pm8226_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
@@ -2225,69 +2287,6 @@ static const struct spmi_regulator_data pmi8994_regulators[] = {
 	{ }
 };
 
-static const struct spmi_regulator_data pm660_regulators[] = {
-	{ "s1", 0x1400, "vdd_s1", },
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0x1d00, "vdd_s3", },
-	{ "s5", 0x2000, "vdd_s5", },
-	{ "s6", 0x2300, "vdd_s6", },
-	{ "l1", 0x4000, "vdd_l1_l6_l7", },
-	{ "l2", 0x4100, "vdd_l2_l3", },
-	{ "l3", 0x4200, "vdd_l2_l3", },
-	/* l4 is unaccessible on PM660 */
-	{ "l5", 0x4400, "vdd_l5", },
-	{ "l6", 0x4500, "vdd_l1_l6_l7", },
-	{ "l7", 0x4600, "vdd_l1_l6_l7", },
-	{ "l8", 0x4700, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l9", 0x4800, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l10", 0x4900, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l11", 0x4a00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l12", 0x4b00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l13", 0x4c00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l14", 0x4d00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l15", 0x4e00, "vdd_l15_l16_l17_l18_l19", },
-	{ "l16", 0x4f00, "vdd_l15_l16_l17_l18_l19", },
-	{ "l17", 0x5000, "vdd_l15_l16_l17_l18_l19", },
-	{ "l18", 0x5100, "vdd_l15_l16_l17_l18_l19", },
-	{ "l19", 0x5200, "vdd_l15_l16_l17_l18_l19", },
-	{ }
-};
-
-static const struct spmi_regulator_data pm660l_regulators[] = {
-	{ "s1", 0x1400, "vdd_s1", },
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0x1d00, "vdd_s4", },
-	{ "s5", 0x2000, "vdd_s5", },
-	{ "l1", 0x4000, "vdd_l1_l9_l10", },
-	{ "l2", 0x4100, "vdd_l2", },
-	{ "l3", 0x4200, "vdd_l3_l5_l7_l8", },
-	{ "l4", 0x4300, "vdd_l4_l6", },
-	{ "l5", 0x4400, "vdd_l3_l5_l7_l8", },
-	{ "l6", 0x4500, "vdd_l4_l6", },
-	{ "l7", 0x4600, "vdd_l3_l5_l7_l8", },
-	{ "l8", 0x4700, "vdd_l3_l5_l7_l8", },
-	{ "l9", 0x4800, "vdd_l1_l9_l10", },
-	{ "l10", 0x4900, "vdd_l1_l9_l10", },
-	{ }
-};
-
-
-static const struct spmi_regulator_data pm8004_regulators[] = {
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s5", 0x2000, "vdd_s5", },
-	{ }
-};
-
-static const struct spmi_regulator_data pm8005_regulators[] = {
-	{ "s1", 0x1400, "vdd_s1", },
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0x1d00, "vdd_s4", },
-	{ }
-};
-
 static const struct spmi_regulator_data pmp8074_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1"},
 	{ "s2", 0x1700, "vdd_s2"},
@@ -2316,6 +2315,8 @@ static const struct spmi_regulator_data pms405_regulators[] = {
 };
 
 static const struct of_device_id qcom_spmi_regulator_match[] = {
+	{ .compatible = "qcom,pm660-regulators", .data = &pm660_regulators },
+	{ .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
 	{ .compatible = "qcom,pm8004-regulators", .data = &pm8004_regulators },
 	{ .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators },
 	{ .compatible = "qcom,pm8226-regulators", .data = &pm8226_regulators },
@@ -2325,8 +2326,6 @@ static const struct of_device_id qcom_spmi_regulator_match[] = {
 	{ .compatible = "qcom,pm8950-regulators", .data = &pm8950_regulators },
 	{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
 	{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
-	{ .compatible = "qcom,pm660-regulators", .data = &pm660_regulators },
-	{ .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
 	{ .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators },
 	{ .compatible = "qcom,pms405-regulators", .data = &pms405_regulators },
 	{ }
-- 
2.37.1

[PATCH v4 09/13] regulator: qcom_spmi: Add PM6125 PMIC support

[Iskren Chernev]

Add support for PM6125 PMIC which is found on SM4250/6115 SoCs.

S1, S2, S3, S4, S8 are FTS+FTSMPS_510, rev 2
- range is 0.3-1.372V by 4mV increments
S5, S6, s7 are BUCK+HFSMPS_510, rev 4
- range is 0.32-2.04V by 8mV increment
L1, L3, L7 are LDO+N600_510, rev 2
L2, L4, L8, L17, L18 are LDO+N300_510, rev 2
L6 is LDO+N1200_510, rev 2
- range is 0.32-1.304V by 8mV increment
L5 is LDO+MV_P50_510, rev 2
L15, L19, L20 are LDO+MV_P150_510, rev 2
L21, L22, L23, L24 are LDO+MV_P600_510, rev 2
- range is 1.504-3.544V by 8mV increment
L9, L11, L14 are LDO+LV_P600_510, rev 2
L10, L16 are LDO+LV_P150_510, rev 2
L12, L13 are LDO+LV_P300_510, rev 2
- range 1.504-2V by 8mV increment

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/regulator/qcom_spmi-regulator.c | 36 +++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index aed818c7a4d4..3e312729741e 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -2021,6 +2021,41 @@ static int spmi_regulator_of_parse(struct device_node *node,
 	return 0;
 }
 
+static const struct spmi_regulator_data pm6125_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1" },
+	{ "s2", 0x1700, "vdd_s2" },
+	{ "s3", 0x1a00, "vdd_s3" },
+	{ "s4", 0x1d00, "vdd_s4" },
+	{ "s5", 0x2000, "vdd_s5" },
+	{ "s6", 0x2300, "vdd_s6" },
+	{ "s7", 0x2600, "vdd_s7" },
+	{ "s8", 0x2900, "vdd_s8" },
+	{ "l1", 0x4000, "vdd_l1_l7_l17_l18" },
+	{ "l2", 0x4100, "vdd_l2_l3_l4" },
+	{ "l3", 0x4200, "vdd_l2_l3_l4" },
+	{ "l4", 0x4300, "vdd_l2_l3_l4" },
+	{ "l5", 0x4400, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l6", 0x4500, "vdd_l6_l8" },
+	{ "l7", 0x4600, "vdd_l1_l7_l17_l18" },
+	{ "l8", 0x4700, "vdd_l6_l8" },
+	{ "l9", 0x4800, "vdd_l9_l11" },
+	{ "l10", 0x4900, "vdd_l10_l13_l14" },
+	{ "l11", 0x4a00, "vdd_l9_l11" },
+	{ "l12", 0x4b00, "vdd_l12_l16" },
+	{ "l13", 0x4c00, "vdd_l10_l13_l14" },
+	{ "l14", 0x4d00, "vdd_l10_l13_l14" },
+	{ "l15", 0x4e00, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l16", 0x4f00, "vdd_l12_l16" },
+	{ "l17", 0x5000, "vdd_l1_l7_l17_l18" },
+	{ "l18", 0x5100, "vdd_l1_l7_l17_l18" },
+	{ "l19", 0x5200, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l20", 0x5300, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l21", 0x5400, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l22", 0x5500, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l23", 0x5600, "vdd_l23_l24" },
+	{ "l24", 0x5700, "vdd_l23_l24" },
+};
+
 static const struct spmi_regulator_data pm660_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
@@ -2315,6 +2350,7 @@ static const struct spmi_regulator_data pms405_regulators[] = {
 };
 
 static const struct of_device_id qcom_spmi_regulator_match[] = {
+	{ .compatible = "qcom,pm6125-regulators", .data = &pm6125_regulators },
 	{ .compatible = "qcom,pm660-regulators", .data = &pm660_regulators },
 	{ .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
 	{ .compatible = "qcom,pm8004-regulators", .data = &pm8004_regulators },
-- 
2.37.1

[PATCH v4 10/13] regulator: qcom_smd: Sort pmics alphabetically (part 1)

[Iskren Chernev]

The sorting is split in multiple commits for easier reviewing.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_smd-regulator.c | 178 ++++++++++++-------------
 1 file changed, 89 insertions(+), 89 deletions(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 59024c639141..c807768d1927 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -772,6 +772,44 @@ static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm8226_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8226_hfsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8226_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8226_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8226_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8226_hfsmps, "vdd_s5" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8226_pldo, "vdd_l12_l14" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8226_pldo, "vdd_l12_l14" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8226_pldo, "vdd_l25" },
+	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8226_switch, "vdd_lvs1" },
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pm8841_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm8x41_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm8841_ftsmps, "vdd_s2" },
@@ -833,44 +871,6 @@ static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pm8226_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8226_hfsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8226_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8226_hfsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8226_hfsmps, "vdd_s4" },
-	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8226_hfsmps, "vdd_s5" },
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8226_nldo, "vdd_l3_l24_l26" },
-	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8226_pldo, "vdd_l10_l11_l13" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8226_pldo, "vdd_l10_l11_l13" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8226_pldo, "vdd_l12_l14" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8226_pldo, "vdd_l10_l11_l13" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8226_pldo, "vdd_l12_l14" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8226_nldo, "vdd_l3_l24_l26" },
-	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8226_pldo, "vdd_l25" },
-	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8226_nldo, "vdd_l3_l24_l26" },
-	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8226_switch, "vdd_lvs1" },
-	{}
-};
-
 static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" },
@@ -912,57 +912,6 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" },
-	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" },
-	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" },
-	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" },
-	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" },
-	{ "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" },
-	{ "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" },
-	{ "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" },
-	{ "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" },
-
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" },
-	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" },
-	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" },
-	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" },
-	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-
-	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch },
-	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch },
-	{ "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch },
-	{ "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch },
-	{ "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch },
-
-	{}
-};
-
 static const struct rpm_regulator_data rpm_pm8950_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8950_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8950_hfsmps, "vdd_s2" },
@@ -1082,6 +1031,57 @@ static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" },
+	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" },
+	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" },
+	{ "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" },
+	{ "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" },
+	{ "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" },
+	{ "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" },
+
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" },
+	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch },
+	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch },
+	{ "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch },
+	{ "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch },
+	{ "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch },
+
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pmi8994_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pmi8994_ftsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pmi8994_hfsmps, "vdd_s2" },
-- 
2.37.1

[PATCH v4 11/13] regulator: qcom_smd: Sort pmics alphabetically (part 2)

[Iskren Chernev]

The sorting is split in multiple commits for easier reviewing.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_smd-regulator.c | 154 ++++++++++++-------------
 1 file changed, 77 insertions(+), 77 deletions(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index c807768d1927..cabcf9944ac1 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -772,6 +772,36 @@ static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm2250_lvftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm2250_lvftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm2250_lvftsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm2250_ftsmps, "vdd_s4" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pm8226_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8226_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8226_ftsmps, "vdd_s2" },
@@ -1031,6 +1061,53 @@ static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm8998_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8998_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8998_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8998_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8998_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8998_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm8998_ftsmps, "vdd_s6" },
+	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pm8998_ftsmps, "vdd_s7" },
+	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pm8998_ftsmps, "vdd_s8" },
+	{ "s9", QCOM_SMD_RPM_SMPA, 9, &pm8998_ftsmps, "vdd_s9" },
+	{ "s10", QCOM_SMD_RPM_SMPA, 10, &pm8998_ftsmps, "vdd_s10" },
+	{ "s11", QCOM_SMD_RPM_SMPA, 11, &pm8998_ftsmps, "vdd_s11" },
+	{ "s12", QCOM_SMD_RPM_SMPA, 12, &pm8998_ftsmps, "vdd_s12" },
+	{ "s13", QCOM_SMD_RPM_SMPA, 13, &pm8998_ftsmps, "vdd_s13" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8998_nldo, "vdd_l1_l27" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8998_nldo, "vdd_l2_l8_l17" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8998_nldo, "vdd_l3_l11" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8998_nldo, "vdd_l4_l5" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8998_nldo, "vdd_l4_l5" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8998_pldo, "vdd_l6" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8998_nldo, "vdd_l2_l8_l17" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8998_pldo, "vdd_l9" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8998_pldo, "vdd_l10_l23_l25" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8998_nldo, "vdd_l3_l11" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8998_pldo, "vdd_l13_l19_l21" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8998_pldo, "vdd_l16_l28" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8998_nldo, "vdd_l2_l8_l17" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8998_pldo, "vdd_l18_l22" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8998_pldo, "vdd_l13_l19_l21" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8998_pldo, "vdd_l20_l24" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8998_pldo, "vdd_l13_l19_l21" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8998_pldo, "vdd_l18_l22" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8998_pldo, "vdd_l10_l23_l25" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8998_pldo, "vdd_l20_l24" },
+	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8998_pldo, "vdd_l10_l23_l25" },
+	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8998_nldo, "vdd_l26" },
+	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8998_nldo, "vdd_l1_l27" },
+	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8998_pldo, "vdd_l16_l28" },
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8998_switch, "vdd_lvs1_lvs2" },
+	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pm8998_switch, "vdd_lvs1_lvs2" },
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" },
@@ -1090,53 +1167,6 @@ static const struct rpm_regulator_data rpm_pmi8994_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pm8998_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8998_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8998_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8998_hfsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8998_hfsmps, "vdd_s4" },
-	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8998_hfsmps, "vdd_s5" },
-	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm8998_ftsmps, "vdd_s6" },
-	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pm8998_ftsmps, "vdd_s7" },
-	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pm8998_ftsmps, "vdd_s8" },
-	{ "s9", QCOM_SMD_RPM_SMPA, 9, &pm8998_ftsmps, "vdd_s9" },
-	{ "s10", QCOM_SMD_RPM_SMPA, 10, &pm8998_ftsmps, "vdd_s10" },
-	{ "s11", QCOM_SMD_RPM_SMPA, 11, &pm8998_ftsmps, "vdd_s11" },
-	{ "s12", QCOM_SMD_RPM_SMPA, 12, &pm8998_ftsmps, "vdd_s12" },
-	{ "s13", QCOM_SMD_RPM_SMPA, 13, &pm8998_ftsmps, "vdd_s13" },
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8998_nldo, "vdd_l1_l27" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8998_nldo, "vdd_l2_l8_l17" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8998_nldo, "vdd_l3_l11" },
-	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8998_nldo, "vdd_l4_l5" },
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8998_nldo, "vdd_l4_l5" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8998_pldo, "vdd_l6" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8998_nldo, "vdd_l2_l8_l17" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8998_pldo, "vdd_l9" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8998_pldo, "vdd_l10_l23_l25" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8998_nldo, "vdd_l3_l11" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8998_pldo, "vdd_l13_l19_l21" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8998_pldo, "vdd_l16_l28" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8998_nldo, "vdd_l2_l8_l17" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8998_pldo, "vdd_l18_l22" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8998_pldo, "vdd_l13_l19_l21" },
-	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8998_pldo, "vdd_l20_l24" },
-	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8998_pldo, "vdd_l13_l19_l21" },
-	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8998_pldo, "vdd_l18_l22" },
-	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8998_pldo, "vdd_l10_l23_l25" },
-	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8998_pldo, "vdd_l20_l24" },
-	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8998_pldo, "vdd_l10_l23_l25" },
-	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8998_nldo, "vdd_l26" },
-	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8998_nldo, "vdd_l1_l27" },
-	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8998_pldo, "vdd_l16_l28" },
-	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8998_switch, "vdd_lvs1_lvs2" },
-	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pm8998_switch, "vdd_lvs1_lvs2" },
-	{}
-};
-
 static const struct rpm_regulator_data rpm_pmi8998_regulators[] = {
 	{ "bob", QCOM_SMD_RPM_BOBB, 1, &pmi8998_bob, "vdd_bob" },
 	{}
@@ -1212,36 +1242,6 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm2250_lvftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm2250_lvftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm2250_lvftsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm2250_ftsmps, "vdd_s4" },
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{}
-};
-
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
-- 
2.37.1

[PATCH v4 12/13] regulator: qcom_smd: Sort pmics alphabetically (part 3)

[Iskren Chernev]

The sorting is split in multiple commits for easier reviewing.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 drivers/regulator/qcom_smd-regulator.c | 104 ++++++++++++-------------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index cabcf9944ac1..92c9631a2415 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -802,6 +802,54 @@ static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm660_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm660_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm660_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm660_ftsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm660_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm660_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm660_hfsmps, "vdd_s6" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l6_l7" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_ht_nldo, "vdd_l2_l3" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l2_l3" },
+	/* l4 is unaccessible on PM660 */
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_ht_nldo, "vdd_l5" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_ht_nldo, "vdd_l1_l6_l7" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_ht_nldo, "vdd_l1_l6_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ }
+};
+
+static const struct rpm_regulator_data rpm_pm660l_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm660_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm660_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_RWCX, 0, &pm660_ftsmps, "vdd_s3_s4" },
+	{ "s5", QCOM_SMD_RPM_RWMX, 0, &pm660_ftsmps, "vdd_s5" },
+	{ "l1", QCOM_SMD_RPM_LDOB, 1, &pm660_nldo660, "vdd_l1_l9_l10" },
+	{ "l2", QCOM_SMD_RPM_LDOB, 2, &pm660_pldo660, "vdd_l2" },
+	{ "l3", QCOM_SMD_RPM_LDOB, 3, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l4", QCOM_SMD_RPM_LDOB, 4, &pm660_pldo660, "vdd_l4_l6" },
+	{ "l5", QCOM_SMD_RPM_LDOB, 5, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l6", QCOM_SMD_RPM_LDOB, 6, &pm660_pldo660, "vdd_l4_l6" },
+	{ "l7", QCOM_SMD_RPM_LDOB, 7, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l8", QCOM_SMD_RPM_LDOB, 8, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l9", QCOM_SMD_RPM_RWLC, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
+	{ "l10", QCOM_SMD_RPM_RWLM, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
+	{ "bob", QCOM_SMD_RPM_BOBB, 1, &pm660l_bob, "vdd_bob", },
+	{ }
+};
+
 static const struct rpm_regulator_data rpm_pm8226_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8226_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8226_ftsmps, "vdd_s2" },
@@ -1172,54 +1220,6 @@ static const struct rpm_regulator_data rpm_pmi8998_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pm660_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm660_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm660_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm660_ftsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm660_hfsmps, "vdd_s4" },
-	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm660_hfsmps, "vdd_s5" },
-	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm660_hfsmps, "vdd_s6" },
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l6_l7" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_ht_nldo, "vdd_l2_l3" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l2_l3" },
-	/* l4 is unaccessible on PM660 */
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_ht_nldo, "vdd_l5" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_ht_nldo, "vdd_l1_l6_l7" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_ht_nldo, "vdd_l1_l6_l7" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ }
-};
-
-static const struct rpm_regulator_data rpm_pm660l_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm660_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm660_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_RWCX, 0, &pm660_ftsmps, "vdd_s3_s4" },
-	{ "s5", QCOM_SMD_RPM_RWMX, 0, &pm660_ftsmps, "vdd_s5" },
-	{ "l1", QCOM_SMD_RPM_LDOB, 1, &pm660_nldo660, "vdd_l1_l9_l10" },
-	{ "l2", QCOM_SMD_RPM_LDOB, 2, &pm660_pldo660, "vdd_l2" },
-	{ "l3", QCOM_SMD_RPM_LDOB, 3, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l4", QCOM_SMD_RPM_LDOB, 4, &pm660_pldo660, "vdd_l4_l6" },
-	{ "l5", QCOM_SMD_RPM_LDOB, 5, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l6", QCOM_SMD_RPM_LDOB, 6, &pm660_pldo660, "vdd_l4_l6" },
-	{ "l7", QCOM_SMD_RPM_LDOB, 7, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l8", QCOM_SMD_RPM_LDOB, 8, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l9", QCOM_SMD_RPM_RWLC, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
-	{ "l10", QCOM_SMD_RPM_RWLM, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
-	{ "bob", QCOM_SMD_RPM_BOBB, 1, &pm660l_bob, "vdd_bob", },
-	{ }
-};
-
 static const struct rpm_regulator_data rpm_pms405_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pms405_hfsmps3, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pms405_hfsmps3, "vdd_s2" },
@@ -1244,22 +1244,22 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = {
 
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
+	{ .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators },
+	{ .compatible = "qcom,rpm-pm660-regulators", .data = &rpm_pm660_regulators },
+	{ .compatible = "qcom,rpm-pm660l-regulators", .data = &rpm_pm660l_regulators },
+	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8909-regulators", .data = &rpm_pm8909_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
-	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
 	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
 	{ .compatible = "qcom,rpm-pm8950-regulators", .data = &rpm_pm8950_regulators },
 	{ .compatible = "qcom,rpm-pm8953-regulators", .data = &rpm_pm8953_regulators },
 	{ .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
 	{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
-	{ .compatible = "qcom,rpm-pm660-regulators", .data = &rpm_pm660_regulators },
-	{ .compatible = "qcom,rpm-pm660l-regulators", .data = &rpm_pm660l_regulators },
 	{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
 	{ .compatible = "qcom,rpm-pmi8994-regulators", .data = &rpm_pmi8994_regulators },
 	{ .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators },
 	{ .compatible = "qcom,rpm-pms405-regulators", .data = &rpm_pms405_regulators },
-	{ .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);
-- 
2.37.1

[PATCH v4 13/13] regulator: qcom_smd: Add PM6125 RPM regulators

[Iskren Chernev]

The ranges and types are taken from the relevant SPMI driver:

- ftsmps_510: s1-s4, s8
- buck_510: s5-s7
- ldo_nX_510: l1-l4, l6-l8, l17-18
- ldo_mv_pX_510: l5, l15, l19-l24
- ldo_lv_pX_510: l9-l14, l16

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/regulator/qcom_smd-regulator.c | 46 ++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 92c9631a2415..f98168d58dce 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -668,6 +668,15 @@ static const struct regulator_desc pm660l_bob = {
 	.ops = &rpm_bob_ops,
 };
 
+static const struct regulator_desc pm6125_ftsmps = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(300000, 0, 268, 4000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 269,
+	.ops = &rpm_smps_ldo_ops,
+};
+
 static const struct regulator_desc pms405_hfsmps3 = {
 	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
@@ -802,6 +811,42 @@ static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm6125_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm6125_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm6125_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm6125_ftsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm6125_ftsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8998_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm8998_hfsmps, "vdd_s6" },
+	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pm8998_hfsmps, "vdd_s7" },
+	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pm6125_ftsmps, "vdd_s8" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_nldo660, "vdd_l2_l3_l4" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l2_l3_l4" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm660_nldo660, "vdd_l2_l3_l4" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_nldo660, "vdd_l6_l8" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_nldo660, "vdd_l6_l8" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_ht_lvpldo, "vdd_l9_l11" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_ht_lvpldo, "vdd_l10_l13_l14" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_ht_lvpldo, "vdd_l9_l11" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_ht_lvpldo, "vdd_l12_l16" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l10_l13_l14" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l10_l13_l14" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_ht_lvpldo, "vdd_l12_l16" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm660_pldo660, "vdd_l23_l24" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm660_pldo660, "vdd_l23_l24" },
+	{ }
+};
+
 static const struct rpm_regulator_data rpm_pm660_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm660_ftsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm660_ftsmps, "vdd_s2" },
@@ -1245,6 +1290,7 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = {
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
 	{ .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators },
+	{ .compatible = "qcom,rpm-pm6125-regulators", .data = &rpm_pm6125_regulators },
 	{ .compatible = "qcom,rpm-pm660-regulators", .data = &rpm_pm660_regulators },
 	{ .compatible = "qcom,rpm-pm660l-regulators", .data = &rpm_pm660l_regulators },
 	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
-- 
2.37.1

Re: [PATCH v4 00/13] PM6125 regulator support

[Mark Brown]

On Wed, 3 Aug 2022 01:10:59 +0300, Iskren Chernev wrote:
> This patch series adds SPMI and SMD regulator support for the PM6125 found on
> SM4250/SM6115 SoCs from QCom.
> 
> This code has been tested on:
> * OnePlus Nord N100 (oneplus,billie2, SoC sm4250)
> * Redmi 9T (redmi,lemon, SoC sm6115)
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[01/13] dt-bindings: regulator: qcom_spmi: Improve formatting of if-then blocks
        commit: ac71792707226d1210127611bb622c0362cbff25
[02/13] dt-bindings: regulator: qcom_spmi: Document PM6125 PMIC
        commit: 5b2a085baaa15d04396889228f1e11d2cb86b916
[03/13] dt-bindings: regulator: qcom_smd: Sort compatibles alphabetically
        commit: 901421765ee1e5501c15a3b76ce926e0cc4967d4
[04/13] dt-bindings: regulator: qcom_smd: Document PM6125 PMIC
        commit: d95fe1788438cceab40af5f3f9e9fe15d8c07101
[05/13] regulator: qcom_spmi: Add support for HFSMPS regulator type
        commit: 2785025495b6bd630648f8304f8d932b0d0a9f2a
[06/13] regulator: qcom_spmi: Add support for LDO_510 and FTSMPS
        commit: 0d1cf568b4e0c65cb533fef2c116fb2883803c53
[07/13] regulator: qcom_spmi: Sort pmics alphabetically (part 1)
        commit: 046d7e3246ac028bfe583b4c3bed9530a80004c4
[08/13] regulator: qcom_spmi: Sort pmics alphabetically (part 2)
        commit: 9a2da0749ce37d4a74f7becf3b09bf2e0169145a
[09/13] regulator: qcom_spmi: Add PM6125 PMIC support
        commit: e62ef4a9f936326e702ef08ea3f65b62bd7d108b
[10/13] regulator: qcom_smd: Sort pmics alphabetically (part 1)
        commit: 8e584e84ae65ecc9ee90b187d4b7782dc881e4ad
[11/13] regulator: qcom_smd: Sort pmics alphabetically (part 2)
        commit: 13b3d00590243888563cb63b88538a4c60bce57b
[12/13] regulator: qcom_smd: Sort pmics alphabetically (part 3)
        commit: a39d0100572e188f00ff4d224af9694c7eb3eeb5
[13/13] regulator: qcom_smd: Add PM6125 RPM regulators
        commit: 95b5f3ef4c0cf553a97dd7ce7d6ef85415388011

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark