[PATCH 6/7] phy: qcom-qusb2: Use dev_err_probe() to simplify code

[Yuan Can <yuancan@huawei.com>]

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.

Signed-off-by: Yuan Can <yuancan@huawei.com>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 7529a7e6e5df..2ef638b32e8f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -973,20 +973,14 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(qphy->base);
 
 	qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb");
-	if (IS_ERR(qphy->cfg_ahb_clk)) {
-		ret = PTR_ERR(qphy->cfg_ahb_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get cfg ahb clk, %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(qphy->cfg_ahb_clk))
+		return dev_err_probe(dev, PTR_ERR(qphy->cfg_ahb_clk),
+				     "failed to get cfg ahb clk\n");
 
 	qphy->ref_clk = devm_clk_get(dev, "ref");
-	if (IS_ERR(qphy->ref_clk)) {
-		ret = PTR_ERR(qphy->ref_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get ref clk, %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(qphy->ref_clk))
+		return dev_err_probe(dev, PTR_ERR(qphy->ref_clk),
+				     "failed to get ref clk\n");
 
 	qphy->iface_clk = devm_clk_get_optional(dev, "iface");
 	if (IS_ERR(qphy->iface_clk))
@@ -1003,12 +997,9 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 		qphy->vregs[i].supply = qusb2_phy_vreg_names[i];
 
 	ret = devm_regulator_bulk_get(dev, num, qphy->vregs);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get regulator supplies: %d\n",
-				ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to get regulator supplies\n");
 
 	/* Get the specific init parameters of QMP phy */
 	qphy->cfg = of_device_get_match_data(dev);
-- 
2.17.1