[PATCH v2] mailbox: qcom-ipcc: flag IRQ NO_THREAD

[PATCH v2] mailbox: qcom-ipcc: flag IRQ NO_THREAD

[Eric Chanudet]

PREEMPT_RT forces qcom-ipcc's handler to be threaded with interrupts
enabled, which triggers a warning in __handle_irq_event_percpu():
    irq 173 handler irq_default_primary_handler+0x0/0x10 enabled interrupts
    WARNING: CPU: 0 PID: 77 at kernel/irq/handle.c:161 __handle_irq_event_percpu+0x4c4/0x4d0

Mark it IRQF_NO_THREAD. This is an IRQ-multiplexer and as such it should
not be threaded, otherwise its child-interrupts would be invoked from
the thread handler which is not desired.

This is noticed by PREEMPT_RT, but also on a non-PREEMPT_RT kernel where
`threadirqs' has been used.

Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
---
Changes since v1:
- Reformulate the patch description using Sebastian's response.

v1 can be found at
https://lore.kernel.org/linux-arm-msm/20221003170849.383005-1-echanude@redhat.com/

 drivers/mailbox/qcom-ipcc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mailbox/qcom-ipcc.c b/drivers/mailbox/qcom-ipcc.c
index 31d58b7d55fe..7e27acf6c0cc 100644
--- a/drivers/mailbox/qcom-ipcc.c
+++ b/drivers/mailbox/qcom-ipcc.c
@@ -308,7 +308,8 @@ static int qcom_ipcc_probe(struct platform_device *pdev)
 		goto err_mbox;
 
 	ret = devm_request_irq(&pdev->dev, ipcc->irq, qcom_ipcc_irq_fn,
-			       IRQF_TRIGGER_HIGH | IRQF_NO_SUSPEND, name, ipcc);
+			       IRQF_TRIGGER_HIGH | IRQF_NO_SUSPEND |
+			       IRQF_NO_THREAD, name, ipcc);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to register the irq: %d\n", ret);
 		goto err_req_irq;
-- 
2.37.3