* [PATCH 4/7] arm64: dts: qcom: sdm845-oneplus-common: commonize uart6 pinconf
@ 2022-10-16 14:34 Caleb Connolly
0 siblings, 0 replies; only message in thread
From: Caleb Connolly @ 2022-10-16 14:34 UTC (permalink / raw)
To: caleb
Cc: Andy Gross, Bjorn Andersson, devicetree, Konrad Dybcio,
Krzysztof Kozlowski, linux-arm-msm, linux-kernel, Rob Herring
Use the new qup_uart6_4pin configuration in sd845.dtsi and fix alias
name.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 30 ++-----------------
1 file changed, 3 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 392461c29e76..5d99908d4628 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -19,7 +19,7 @@
/ {
aliases {
serial0 = &uart9;
- hsuart0 = &uart6;
+ serial1 = &uart6;
};
chosen {
@@ -500,35 +500,11 @@ pinconf-rx {
};
};
-/*
- * Prevent garbage data on bluetooth UART lines
- */
-&qup_uart6_default {
- pinmux {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "qup6";
- };
-
- cts {
- pins = "gpio45";
- bias-pull-down;
- };
-
- rts-tx {
- pins = "gpio46", "gpio47";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio48";
- bias-pull-up;
- };
-};
-
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth {
compatible = "qcom,wcn3990-bt";
--
2.38.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2022-10-16 14:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-10-16 14:34 [PATCH 4/7] arm64: dts: qcom: sdm845-oneplus-common: commonize uart6 pinconf Caleb Connolly
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox