* [PATCH 3/4] arm64: dts: qcom: Add initial device tree for SM6375
[not found] <20221022194218.210941-1-konrad.dybcio@somainline.org>
2022-10-22 19:42 ` [PATCH 2/4] dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV Konrad Dybcio
@ 2022-10-22 19:42 ` Konrad Dybcio
2022-10-23 13:02 ` Krzysztof Kozlowski
2022-11-06 4:00 ` Bjorn Andersson
2022-10-22 19:42 ` [PATCH 4/4] arm64: dts: qcom: Add device tree for Sony Xperia 10 IV Konrad Dybcio
2 siblings, 2 replies; 7+ messages in thread
From: Konrad Dybcio @ 2022-10-22 19:42 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, devicetree,
linux-kernel
Add an initial device tree for the SM6375 (SD695) SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 808 +++++++++++++++++++++++++++
1 file changed, 808 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6375.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
new file mode 100644
index 000000000000..30cdc7d50f72
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo660";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
+ #cooling-cells = <2>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "silver-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <702>;
+ exit-latency-us = <915>;
+ min-residency-us = <4001>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <526>;
+ exit-latency-us = <1854>;
+ min-residency-us = <5555>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ idle-state-name = "cluster-power-collapse";
+ arm,psci-suspend-param = <0x41000044>;
+ entry-latency-us = <2752>;
+ exit-latency-us = <3048>;
+ min-residency-us = <6118>;
+ local-timer-stop;
+ };
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-sm6375", "qcom,scm";
+ clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+ clock-names = "core";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>;
+ };
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@80000000 {
+ reg = <0 0x80000000 0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@80700000 {
+ reg = <0 0x80700000 0 0x100000>;
+ no-map;
+ };
+
+ reserved_xbl_uefi: memory@80880000 {
+ reg = <0 0x80880000 0 0x14000>;
+ no-map;
+ };
+
+ smem_mem: smem@80900000 {
+ reg = <0 0x80900000 0 0x200000>;
+ no-map;
+ };
+
+ fw_mem: memory@80b00000 {
+ reg = <0 0x80b00000 0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap_mem: memory@80c00000 {
+ reg = <0 0x80c00000 0 0x1e00000>;
+ no-map;
+ };
+
+ dfps_data_mem: memory@85e00000 {
+ reg = <0 0x85e00000 0 0x100000>;
+ no-map;
+ };
+
+ pil_wlan_mem: memory@86500000 {
+ reg = <0 0x86500000 0 0x200000>;
+ no-map;
+ };
+
+ pil_adsp_mem: memory@86700000 {
+ reg = <0 0x86700000 0 0x2000000>;
+ no-map;
+ };
+
+ pil_cdsp_mem: memory@88700000 {
+ reg = <0 0x88700000 0 0x1e00000>;
+ no-map;
+ };
+
+ pil_video_mem: memory@8a500000 {
+ reg = <0 0x8a500000 0 0x500000>;
+ no-map;
+ };
+
+ pil_ipa_fw_mem: memory@8aa00000 {
+ reg = <0 0x8aa00000 0 0x10000>;
+ no-map;
+ };
+
+ pil_ipa_gsi_mem: memory@8aa10000 {
+ reg = <0 0x8aa10000 0 0xa000>;
+ no-map;
+ };
+
+ pil_gpu_micro_code_mem: memory@8aa1a000 {
+ reg = <0 0x8aa1a000 0 0x2000>;
+ no-map;
+ };
+
+ pil_mpss_wlan_mem: memory@8b800000 {
+ reg = <0 0x8b800000 0 0x10000000>;
+ no-map;
+ };
+
+ removed_mem: memory@c0000000 {
+ reg = <0 0xc0000000 0 0x5100000>;
+ no-map;
+ };
+
+ debug_mem: memory@ffb00000 {
+ reg = <0 0xffb00000 0 0xc0000>;
+ no-map;
+ };
+
+ last_log_mem: memory@ffbc0000 {
+ reg = <0 0xffbc0000 0 0x80000>;
+ no-map;
+ };
+
+ cmdline_region: memory@ffd00000 {
+ reg = <0 0xffd00000 0 0x1000>;
+ no-map;
+ };
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6375";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6375-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_min_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+
+ smem: smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ compatible = "simple-bus";
+
+ ipcc: mailbox@208000 {
+ compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
+ reg = <0 0x00208000 0 0x1000>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ tcsr_mutex: hwlock@340000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x00340000 0x0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ tlmm: pinctrl@500000 {
+ compatible = "qcom,sm6375-tlmm";
+ reg = <0 0x00500000 0 0x800000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 157>;
+ /* TODO: Hook up MPM as wakeup-parent when it's there */
+ interrupt-controller;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ #gpio-cells = <2>;
+ };
+
+ gcc: clock-controller@1400000 {
+ compatible = "qcom,sm6375-gcc";
+ reg = <0 0x01400000 0 0x1f0000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+ <&sleep_clk>;
+ #power-domain-cells = <1>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb_1_hsphy: phy@162b000 {
+ compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x0162b000 0 0x400>;
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spmi_bus: spmi@1c40000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0 0x01c40000 0 0x1100>,
+ <0 0x01e00000 0 0x2000000>,
+ <0 0x03e00000 0 0x100000>,
+ <0 0x03f00000 0 0xa0000>,
+ <0 0x01c0a000 0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ rpm_msg_ram: sram@45f0000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0 0x045f0000 0 0x7000>;
+ };
+
+ usb_1: usb@4ef8800 {
+ compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
+ reg = <0 0x04ef8800 0 0x400>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <133333333>;
+
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ /*
+ * This property is there to allow USB2 to work, as
+ * USB3 is not implemented yet - (re)move it when
+ * proper support is in place.
+ */
+ qcom,select-utmi-as-pipe-clk;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@4e00000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x04e00000 0 0xcd00>;
+ interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ maximum-speed = "high-speed";
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+ iommus = <&apps_smmu 0xe0 0x0>;
+
+ /* Yes, this impl *does* have an unfunny number of quirks.. */
+ snps,hird-threshold = /bits/ 8 <0x10>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,is-utmi-l1-suspend;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,usb3_lpm_capable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+ };
+ };
+
+ apps_smmu: iommu@c600000 {
+ compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
+ reg = <0 0x0c600000 0 0x100000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
+ <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
+ <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+ #global-interrupts = <1>;
+ #iommu-cells = <2>;
+ };
+
+ intc: interrupt-controller@f200000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */
+ <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #redistributor-regions = <1>;
+ #interrupt-cells = <3>;
+ redistributor-stride = <0 0x20000>;
+ interrupt-controller;
+ };
+
+ timer@f420000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0 0x0f420000 0 0x1000>;
+ ranges = <0 0 0 0x20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ frame@f421000 {
+ reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <0>;
+ };
+
+ frame@f423000 {
+ reg = <0x0f243000 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <1>;
+ status = "disabled";
+ };
+
+ frame@f425000 {
+ reg = <0x0f425000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <2>;
+ status = "disabled";
+ };
+
+ frame@f427000 {
+ reg = <0x0f427000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <3>;
+ status = "disabled";
+ };
+
+ frame@f429000 {
+ reg = <0x0f429000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <4>;
+ status = "disabled";
+ };
+
+ frame@f42b000 {
+ reg = <0x0f42b000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <5>;
+ status = "disabled";
+ };
+
+ frame@f42d000 {
+ reg = <0x0f42d000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ frame-number = <6>;
+ status = "disabled";
+ };
+ };
+
+ cpufreq_hw: cpufreq@fd91000 {
+ compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+ #freq-domain-cells = <1>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
2.38.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 4/4] arm64: dts: qcom: Add device tree for Sony Xperia 10 IV
[not found] <20221022194218.210941-1-konrad.dybcio@somainline.org>
2022-10-22 19:42 ` [PATCH 2/4] dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV Konrad Dybcio
2022-10-22 19:42 ` [PATCH 3/4] arm64: dts: qcom: Add initial device tree for SM6375 Konrad Dybcio
@ 2022-10-22 19:42 ` Konrad Dybcio
2022-10-23 13:03 ` Krzysztof Kozlowski
2 siblings, 1 reply; 7+ messages in thread
From: Konrad Dybcio @ 2022-10-22 19:42 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, Krzysztof Kozlowski, Kees Cook, Tony Luck,
Guilherme G. Piccoli, linux-arm-msm, devicetree, linux-kernel,
linux-hardening
Add support for Sony Xperia 10 IV, a.k.a PDX225. This device is a part
of the SoMC SM6375 Murray platform and currently it is the only
device based on that board, so no -common DTSI is created until (if?)
other Murray devices appear.
This commit brings support for:
* USB (only USB2 for now)
* Display via simplefb
To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm6375-sony-xperia-\
murray-pdx225.dtb > .Image.gz-dtb
mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 1 \
--os_version 12 \
--os_patch_level 2022-04 \ # or newer
-o boot.img-sony-xperia-pdx225
Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:
First, you need to get rid of vendor_boot. However, the bootloader
is utterly retarded and it will not let you neither flash nor erase it.
There are a couple ways to handle this: you can either dd /dev/zero to
it from Android (if you have root) or a custom recovery or from fastbootd
(fastboot/adb reboot fastboot). You will not be able to boot Android
images on your phone unless you lock the bootloader (fastboot oem lock)
and restore the factory image with Xperia Companion
Windows-and-macOS-only software.
The best way so far is probably to use the second (_b) slot and flash
mainline there. This will however require you to flash some partitions
manually, as they are not populated from factory:
(boot_b, dtbo_b, vendor_boot_b, vbmeta_b, vbmeta_system_b) - these we
don't really care about as we nuke/replace them
(dsp_b, imagefv_b, modem_b, oem_b, rdimage_b) - these you NEED to populate
to get a successful boot on slot B, otherwise you will have limited / no
functionality.
To switch slots, simply run:
fastboot --set-active=a //or =b
The rest assumes you are on slot A.
// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP
fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system_b \
vbmeta_system.img
fastboot flash boot_b boot.img-sony-xperia-pdx225
fastboot reboot fastboot // entering fastbootd
fastboot flash vendor_boot_b emptything.img
fastboot flash dtbo_b emptything.img
fastboot reboot bootloader // entering bootloader fastboot
fastboot --set-active=b
fastboot reboot // mainline time!
Where emptything.img is a tiny file that consists of 2 bytes (all zeroes),
doing a "fastboot erase" won't cut it, the bootloader will go crazy and
things will fall apart when it tries to overlay random bytes from an empty
partition onto a perfectly good appended DTB.
From there on you can flash new mainline builds by simply flashing
boot.img that you create after each kernel rebuild.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../qcom/sm6375-sony-xperia-murray-pdx225.dts | 82 +++++++++++++++++++
2 files changed, 83 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index b0558d3389e5..0292d116c25b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -144,6 +144,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
new file mode 100644
index 000000000000..24f9e71688ff
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "sm6375.dtsi"
+#include "pmr735a.dtsi"
+
+/ {
+ model = "Sony Xperia 10 IV";
+ compatible = "sony,pdx225", "qcom,sm6375";
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@85200000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x85200000 0 0xc00000>;
+
+ width = <1080>;
+ height = <2520>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet
+ */
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+ };
+ };
+
+ reserved-memory {
+ cont_splash_mem: memory@85200000 {
+ reg = <0 0x85200000 0 0xc00000>;
+ no-map;
+ };
+
+ ramoops@ffc40000 {
+ compatible = "ramoops";
+ reg = <0 0xffc40000 0 0xb0000>;
+ record-size = <0x10000>;
+ console-size = <0x60000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ ecc-size = <16>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <13 4>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+};
--
2.38.1
^ permalink raw reply related [flat|nested] 7+ messages in thread