Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Bjorn Andersson <andersson@kernel.org>
To: Shazad Hussain <quic_shazhuss@quicinc.com>, sboyd@kernel.org
Cc: johan@kernel.org, bmasney@redhat.com, agross@kernel.org,
	mturquette@baylibre.com, ahalaney@redhat.com,
	Johan Hovold <johan+linaro@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks
Date: Tue, 15 Nov 2022 11:13:42 -0600	[thread overview]
Message-ID: <20221115171342.v37vq4cqe7pxatlk@builder.lan> (raw)
In-Reply-To: <20221115152956.21677-1-quic_shazhuss@quicinc.com>

On Tue, Nov 15, 2022 at 08:59:56PM +0530, Shazad Hussain wrote:
> The three UFS reference clocks, gcc_ufs_ref_clkref_clk for external
> UFS devices, gcc_ufs_card_clkref_clk and gcc_ufs_1_card_clkref_clk for
> two PHYs are all sourced from CXO.
> 
> Added parent_data for all three reference clocks described above to
> reflect that all three clocks are sourced from CXO to have valid
> frequency for the ref clock needed by UFS controller driver.
> 
> Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
> Link: https://lore.kernel.org/lkml/Y2Tber39cHuOSR%2FW@hovoldconsulting.com/
> Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
> Tested-by: Johan Hovold <johan+linaro@kernel.org>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Tested-by: Andrew Halaney <ahalaney@redhat.com>
> Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
> Reviewed-by: Reviewed-by: Brian Masney <bmasney@redhat.com>

Really-really-reviewed-by? ;)


Reviewed-by: Bjorn Andersson <andersson@kernel.org>


@Stephen, could you please pick this for clk-fixes?

Thanks,
Bjorn

> ---
> Changes since v2:
> -  Tweaked commit message and added R-b T-b from v2
> 
> v2 of this patch can be found at
> https://lore.kernel.org/all/20221115102217.6381-1-quic_shazhuss@quicinc.com/
> 
> v1 of this patch can be found at
> https://lore.kernel.org/all/20221030142333.31019-1-quic_shazhuss@quicinc.com/
> 
> used below patches for verification on next-20221114
> https://lore.kernel.org/lkml/20221104092045.17410-2-johan+linaro@kernel.org/
> https://lore.kernel.org/lkml/20221104092045.17410-3-johan+linaro@kernel.org/
> https://lore.kernel.org/lkml/20221111113732.461881-1-thierry.reding@gmail.com/
> 
>  drivers/clk/qcom/gcc-sc8280xp.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> index a18ed88f3b82..b3198784e1c3 100644
> --- a/drivers/clk/qcom/gcc-sc8280xp.c
> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> @@ -5364,6 +5364,8 @@ static struct clk_branch gcc_ufs_1_card_clkref_clk = {
>  		.enable_mask = BIT(0),
>  		.hw.init = &(const struct clk_init_data) {
>  			.name = "gcc_ufs_1_card_clkref_clk",
> +			.parent_data = &gcc_parent_data_tcxo,
> +			.num_parents = 1,
>  			.ops = &clk_branch2_ops,
>  		},
>  	},
> @@ -5432,6 +5434,8 @@ static struct clk_branch gcc_ufs_card_clkref_clk = {
>  		.enable_mask = BIT(0),
>  		.hw.init = &(const struct clk_init_data) {
>  			.name = "gcc_ufs_card_clkref_clk",
> +			.parent_data = &gcc_parent_data_tcxo,
> +			.num_parents = 1,
>  			.ops = &clk_branch2_ops,
>  		},
>  	},
> @@ -5848,6 +5852,8 @@ static struct clk_branch gcc_ufs_ref_clkref_clk = {
>  		.enable_mask = BIT(0),
>  		.hw.init = &(const struct clk_init_data) {
>  			.name = "gcc_ufs_ref_clkref_clk",
> +			.parent_data = &gcc_parent_data_tcxo,
> +			.num_parents = 1,
>  			.ops = &clk_branch2_ops,
>  		},
>  	},
> -- 
> 2.38.0
> 

  reply	other threads:[~2022-11-15 17:13 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-15 15:29 [PATCH v3] clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks Shazad Hussain
2022-11-15 17:13 ` Bjorn Andersson [this message]
2022-11-16  2:35   ` Shazad Hussain
2022-11-23  2:27 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221115171342.v37vq4cqe7pxatlk@builder.lan \
    --to=andersson@kernel.org \
    --cc=agross@kernel.org \
    --cc=ahalaney@redhat.com \
    --cc=bmasney@redhat.com \
    --cc=johan+linaro@kernel.org \
    --cc=johan@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=quic_shazhuss@quicinc.com \
    --cc=sboyd@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox