From: Shazad Hussain <quic_shazhuss@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>, <sboyd@kernel.org>
Cc: <johan@kernel.org>, <bmasney@redhat.com>, <agross@kernel.org>,
<mturquette@baylibre.com>, <ahalaney@redhat.com>,
Johan Hovold <johan+linaro@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>, <linux-arm-msm@vger.kernel.org>,
<linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3] clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks
Date: Wed, 16 Nov 2022 08:05:28 +0530 [thread overview]
Message-ID: <4a27136e-a6e3-a932-a063-cbcdebb9485e@quicinc.com> (raw)
In-Reply-To: <20221115171342.v37vq4cqe7pxatlk@builder.lan>
On 11/15/2022 10:43 PM, Bjorn Andersson wrote:
> On Tue, Nov 15, 2022 at 08:59:56PM +0530, Shazad Hussain wrote:
>> The three UFS reference clocks, gcc_ufs_ref_clkref_clk for external
>> UFS devices, gcc_ufs_card_clkref_clk and gcc_ufs_1_card_clkref_clk for
>> two PHYs are all sourced from CXO.
>>
>> Added parent_data for all three reference clocks described above to
>> reflect that all three clocks are sourced from CXO to have valid
>> frequency for the ref clock needed by UFS controller driver.
>>
>> Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
>> Link: https://lore.kernel.org/lkml/Y2Tber39cHuOSR%2FW@hovoldconsulting.com/
>> Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
>> Tested-by: Johan Hovold <johan+linaro@kernel.org>
>> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
>> Tested-by: Andrew Halaney <ahalaney@redhat.com>
>> Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
>> Reviewed-by: Reviewed-by: Brian Masney <bmasney@redhat.com>
>
> Really-really-reviewed-by? >
My bad, thanks for pointing it Bjorn :)
>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>
>
> @Stephen, could you please pick this for clk-fixes?
>
> Thanks,
> Bjorn
>
>> ---
>> Changes since v2:
>> - Tweaked commit message and added R-b T-b from v2
>>
>> v2 of this patch can be found at
>> https://lore.kernel.org/all/20221115102217.6381-1-quic_shazhuss@quicinc.com/
>>
>> v1 of this patch can be found at
>> https://lore.kernel.org/all/20221030142333.31019-1-quic_shazhuss@quicinc.com/
>>
>> used below patches for verification on next-20221114
>> https://lore.kernel.org/lkml/20221104092045.17410-2-johan+linaro@kernel.org/
>> https://lore.kernel.org/lkml/20221104092045.17410-3-johan+linaro@kernel.org/
>> https://lore.kernel.org/lkml/20221111113732.461881-1-thierry.reding@gmail.com/
>>
>> drivers/clk/qcom/gcc-sc8280xp.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
>> index a18ed88f3b82..b3198784e1c3 100644
>> --- a/drivers/clk/qcom/gcc-sc8280xp.c
>> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
>> @@ -5364,6 +5364,8 @@ static struct clk_branch gcc_ufs_1_card_clkref_clk = {
>> .enable_mask = BIT(0),
>> .hw.init = &(const struct clk_init_data) {
>> .name = "gcc_ufs_1_card_clkref_clk",
>> + .parent_data = &gcc_parent_data_tcxo,
>> + .num_parents = 1,
>> .ops = &clk_branch2_ops,
>> },
>> },
>> @@ -5432,6 +5434,8 @@ static struct clk_branch gcc_ufs_card_clkref_clk = {
>> .enable_mask = BIT(0),
>> .hw.init = &(const struct clk_init_data) {
>> .name = "gcc_ufs_card_clkref_clk",
>> + .parent_data = &gcc_parent_data_tcxo,
>> + .num_parents = 1,
>> .ops = &clk_branch2_ops,
>> },
>> },
>> @@ -5848,6 +5852,8 @@ static struct clk_branch gcc_ufs_ref_clkref_clk = {
>> .enable_mask = BIT(0),
>> .hw.init = &(const struct clk_init_data) {
>> .name = "gcc_ufs_ref_clkref_clk",
>> + .parent_data = &gcc_parent_data_tcxo,
>> + .num_parents = 1,
>> .ops = &clk_branch2_ops,
>> },
>> },
>> --
>> 2.38.0
>>
next prev parent reply other threads:[~2022-11-16 2:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-15 15:29 [PATCH v3] clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks Shazad Hussain
2022-11-15 17:13 ` Bjorn Andersson
2022-11-16 2:35 ` Shazad Hussain [this message]
2022-11-23 2:27 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4a27136e-a6e3-a932-a063-cbcdebb9485e@quicinc.com \
--to=quic_shazhuss@quicinc.com \
--cc=agross@kernel.org \
--cc=ahalaney@redhat.com \
--cc=andersson@kernel.org \
--cc=bmasney@redhat.com \
--cc=johan+linaro@kernel.org \
--cc=johan@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox