[PATCH 2/2] clk: qcom: gcc-sm6115: Add missing PLL config properties

[Konrad Dybcio <konrad.dybcio@linaro.org>]

When the driver was ported upstream, PLL ctl register values were omitted.
Add them to ensure the PLLs are fully configured like we expect them to.

Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/gcc-sm6115.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clk/qcom/gcc-sm6115.c b/drivers/clk/qcom/gcc-sm6115.c
index 5f09aefa7fb9..033e308ff865 100644
--- a/drivers/clk/qcom/gcc-sm6115.c
+++ b/drivers/clk/qcom/gcc-sm6115.c
@@ -119,6 +119,8 @@ static const struct alpha_pll_config gpll10_config = {
 	.vco_mask = GENMASK(21, 20),
 	.main_output_mask = BIT(0),
 	.config_ctl_val = 0x4001055b,
+	.test_ctl_hi1_val = 0x1,
+	.test_ctl_hi_mask = 0x1,
 };
 
 static struct clk_alpha_pll gpll10 = {
@@ -170,6 +172,8 @@ static const struct alpha_pll_config gpll11_config = {
 	.vco_val = 0x2 << 20,
 	.vco_mask = GENMASK(21, 20),
 	.config_ctl_val = 0x4001055b,
+	.test_ctl_hi1_val = 0x1,
+	.test_ctl_hi_mask = 0x1,
 };
 
 static struct clk_alpha_pll gpll11 = {
@@ -362,6 +366,8 @@ static const struct alpha_pll_config gpll8_config = {
 	.post_div_val = 0x1 << 8,
 	.post_div_mask = GENMASK(11, 8),
 	.config_ctl_val = 0x4001055b,
+	.test_ctl_hi1_val = 0x1,
+	.test_ctl_hi_mask = 0x1,
 };
 
 static struct clk_alpha_pll gpll8 = {
@@ -413,6 +419,8 @@ static const struct alpha_pll_config gpll9_config = {
 	.post_div_mask = GENMASK(9, 8),
 	.main_output_mask = BIT(0),
 	.config_ctl_val = 0x00004289,
+	.test_ctl_mask = GENMASK(31, 0),
+	.test_ctl_val = 0x08000000,
 };
 
 static struct clk_alpha_pll gpll9 = {

-- 
2.40.1