[PATCH v2 00/14] drm/msm/dpu: cleanup dpu_core_perf module

[PATCH v2 00/14] drm/msm/dpu: cleanup dpu_core_perf module

[Dmitry Baryshkov]

Apply several cleanups to the DPU's core_perf module.

Changes since v1:
- Reworked overrides for the perf parameters instead of completely
  dropping them. Abhinav described why these overrides are useful.
- Moved max clock rate determination to dpu_kms.c

Dmitry Baryshkov (14):
  drm/msm/dpu: drop enum dpu_core_perf_data_bus_id
  drm/msm/dpu: core_perf: extract bandwidth aggregation function
  drm/msm/dpu: core_perf: bail earlier if there are no ICC paths
  drm/msm/dpu: drop separate dpu_core_perf_tune overrides
  drm/msm/dpu: handle perf mode in _dpu_core_perf_crtc_update_bus()
  drm/msm/dpu: rework core_perf debugfs overrides
  drm/msm/dpu: drop dpu_core_perf_params::max_per_pipe_ib
  drm/msm/dpu: rework indentation in dpu_core_perf
  drm/msm/dpu: drop the dpu_core_perf_crtc_update()'s stop_req param
  drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code
  drm/msm/dpu: remove unused fields from struct dpu_core_perf
  drm/msm/dpu: core_perf: remove extra clk_round_rate() call
  drm/msm/dpu: move max clock decision to dpu_kms.
  drm/msm/dpu: drop dpu_core_perf_destroy()

 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 265 +++++-------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  60 +---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c      |   8 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  14 +-
 4 files changed, 96 insertions(+), 251 deletions(-)

-- 
2.39.2

[PATCH v2 01/14] drm/msm/dpu: drop enum dpu_core_perf_data_bus_id

[Dmitry Baryshkov]

Drop the leftover of bus-client -> interconnect conversion, the enum
dpu_core_perf_data_bus_id.

Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index e3795995e145..29bb8ee2bc26 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -14,19 +14,6 @@
 
 #define	DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE	412500000
 
-/**
- * enum dpu_core_perf_data_bus_id - data bus identifier
- * @DPU_CORE_PERF_DATA_BUS_ID_MNOC: DPU/MNOC data bus
- * @DPU_CORE_PERF_DATA_BUS_ID_LLCC: MNOC/LLCC data bus
- * @DPU_CORE_PERF_DATA_BUS_ID_EBI: LLCC/EBI data bus
- */
-enum dpu_core_perf_data_bus_id {
-	DPU_CORE_PERF_DATA_BUS_ID_MNOC,
-	DPU_CORE_PERF_DATA_BUS_ID_LLCC,
-	DPU_CORE_PERF_DATA_BUS_ID_EBI,
-	DPU_CORE_PERF_DATA_BUS_ID_MAX,
-};
-
 /**
  * struct dpu_core_perf_params - definition of performance parameters
  * @max_per_pipe_ib: maximum instantaneous bandwidth request
-- 
2.39.2

[PATCH v2 02/14] drm/msm/dpu: core_perf: extract bandwidth aggregation function

[Dmitry Baryshkov]

In preparation to refactoring the dpu_core_perf debugfs interface,
extract the bandwidth aggregation function from
_dpu_core_perf_crtc_update_bus().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 39 +++++++++++--------
 1 file changed, 22 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 1d9d83d7b99e..333dcfe57800 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -206,33 +206,38 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 	return 0;
 }
 
-static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
-		struct drm_crtc *crtc)
+static void dpu_core_perf_aggregate(struct drm_device *ddev,
+				    enum dpu_crtc_client_type curr_client_type,
+				    struct dpu_core_perf_params *perf)
 {
-	struct dpu_core_perf_params perf = { 0 };
-	enum dpu_crtc_client_type curr_client_type
-					= dpu_crtc_get_client_type(crtc);
-	struct drm_crtc *tmp_crtc;
 	struct dpu_crtc_state *dpu_cstate;
-	int i, ret = 0;
-	u64 avg_bw;
+	struct drm_crtc *tmp_crtc;
 
-	drm_for_each_crtc(tmp_crtc, crtc->dev) {
+	drm_for_each_crtc(tmp_crtc, ddev) {
 		if (tmp_crtc->enabled &&
-			curr_client_type ==
-				dpu_crtc_get_client_type(tmp_crtc)) {
+		    curr_client_type == dpu_crtc_get_client_type(tmp_crtc)) {
 			dpu_cstate = to_dpu_crtc_state(tmp_crtc->state);
 
-			perf.max_per_pipe_ib = max(perf.max_per_pipe_ib,
-					dpu_cstate->new_perf.max_per_pipe_ib);
+			perf->max_per_pipe_ib = max(perf->max_per_pipe_ib,
+						    dpu_cstate->new_perf.max_per_pipe_ib);
 
-			perf.bw_ctl += dpu_cstate->new_perf.bw_ctl;
+			perf->bw_ctl += dpu_cstate->new_perf.bw_ctl;
 
-			DRM_DEBUG_ATOMIC("crtc=%d bw=%llu paths:%d\n",
-				  tmp_crtc->base.id,
-				  dpu_cstate->new_perf.bw_ctl, kms->num_paths);
+			DRM_DEBUG_ATOMIC("crtc=%d bw=%llu\n",
+					 tmp_crtc->base.id,
+					 dpu_cstate->new_perf.bw_ctl);
 		}
 	}
+}
+
+static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
+		struct drm_crtc *crtc)
+{
+	struct dpu_core_perf_params perf = { 0 };
+	int i, ret = 0;
+	u64 avg_bw;
+
+	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
 
 	if (!kms->num_paths)
 		return 0;
-- 
2.39.2

[PATCH v2 03/14] drm/msm/dpu: core_perf: bail earlier if there are no ICC paths

[Dmitry Baryshkov]

Skip bandwidth aggregation and return early if there are no interconnect
paths defined for the DPU device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 333dcfe57800..05d340aa18c5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -237,11 +237,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 	int i, ret = 0;
 	u64 avg_bw;
 
-	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
-
 	if (!kms->num_paths)
 		return 0;
 
+	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
+
 	avg_bw = perf.bw_ctl;
 	do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/
 
-- 
2.39.2

[PATCH v2 04/14] drm/msm/dpu: drop separate dpu_core_perf_tune overrides

[Dmitry Baryshkov]

The values in struct dpu_core_perf_tune are fixed per the core perf
mode. Drop the 'tune' values and substitute them with known values when
performing perf management.

Note: min_bus_vote was not used at all, so it is just silently dropped.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 29 ++++++++-----------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  4 ---
 2 files changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 05d340aa18c5..348550ac7e51 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -235,7 +235,7 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 {
 	struct dpu_core_perf_params perf = { 0 };
 	int i, ret = 0;
-	u64 avg_bw;
+	u32 avg_bw;
 
 	if (!kms->num_paths)
 		return 0;
@@ -291,10 +291,16 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
 
 static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
 {
-	u64 clk_rate = kms->perf.perf_tune.min_core_clk;
+	u64 clk_rate;
 	struct drm_crtc *crtc;
 	struct dpu_crtc_state *dpu_cstate;
 
+	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED)
+		return kms->perf.fix_core_clk_rate;
+
+	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM)
+		return kms->perf.max_core_clk_rate;
+
 	drm_for_each_crtc(crtc, kms->dev) {
 		if (crtc->enabled) {
 			dpu_cstate = to_dpu_crtc_state(crtc->state);
@@ -305,11 +311,6 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
 		}
 	}
 
-	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED)
-		clk_rate = kms->perf.fix_core_clk_rate;
-
-	DRM_DEBUG_ATOMIC("clk:%llu\n", clk_rate);
-
 	return clk_rate;
 }
 
@@ -397,6 +398,8 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 	if (update_clk) {
 		clk_rate = _dpu_core_perf_get_core_clk_rate(kms);
 
+		DRM_DEBUG_ATOMIC("clk:%llu\n", clk_rate);
+
 		trace_dpu_core_perf_update_clk(kms->dev, stop_req, clk_rate);
 
 		clk_rate = min(clk_rate, kms->perf.max_core_clk_rate);
@@ -418,7 +421,6 @@ static ssize_t _dpu_core_perf_mode_write(struct file *file,
 		    const char __user *user_buf, size_t count, loff_t *ppos)
 {
 	struct dpu_core_perf *perf = file->private_data;
-	const struct dpu_perf_cfg *cfg = perf->catalog->perf;
 	u32 perf_mode = 0;
 	int ret;
 
@@ -433,14 +435,9 @@ static ssize_t _dpu_core_perf_mode_write(struct file *file,
 		DRM_INFO("fix performance mode\n");
 	} else if (perf_mode == DPU_PERF_MODE_MINIMUM) {
 		/* run the driver with max clk and BW vote */
-		perf->perf_tune.min_core_clk = perf->max_core_clk_rate;
-		perf->perf_tune.min_bus_vote =
-				(u64) cfg->max_bw_high * 1000;
 		DRM_INFO("minimum performance mode\n");
 	} else if (perf_mode == DPU_PERF_MODE_NORMAL) {
 		/* reset the perf tune params to 0 */
-		perf->perf_tune.min_core_clk = 0;
-		perf->perf_tune.min_bus_vote = 0;
 		DRM_INFO("normal performance mode\n");
 	}
 	perf->perf_tune.mode = perf_mode;
@@ -456,10 +453,8 @@ static ssize_t _dpu_core_perf_mode_read(struct file *file,
 	char buf[128];
 
 	len = scnprintf(buf, sizeof(buf),
-			"mode %d min_mdp_clk %llu min_bus_vote %llu\n",
-			perf->perf_tune.mode,
-			perf->perf_tune.min_core_clk,
-			perf->perf_tune.min_bus_vote);
+			"mode %d\n",
+			perf->perf_tune.mode);
 
 	return simple_read_from_buffer(buff, count, ppos, buf, len);
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 29bb8ee2bc26..c965dfbc3007 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -29,13 +29,9 @@ struct dpu_core_perf_params {
 /**
  * struct dpu_core_perf_tune - definition of performance tuning control
  * @mode: performance mode
- * @min_core_clk: minimum core clock
- * @min_bus_vote: minimum bus vote
  */
 struct dpu_core_perf_tune {
 	u32 mode;
-	u64 min_core_clk;
-	u64 min_bus_vote;
 };
 
 /**
-- 
2.39.2

[PATCH v2 05/14] drm/msm/dpu: handle perf mode in _dpu_core_perf_crtc_update_bus()

[Dmitry Baryshkov]

Move perf mode handling for the bandwidth to
_dpu_core_perf_crtc_update_bus() rather than overriding per-CRTC data
and then aggregating known values.

Note, this changes the fix_core_ab_vote. Previously it would be
multiplied per the CRTC number, now it will be used directly for
interconnect voting.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 37 +++++++++----------
 1 file changed, 18 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 348550ac7e51..42c03a5f1f3e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -116,21 +116,9 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
 		return;
 	}
 
-	memset(perf, 0, sizeof(struct dpu_core_perf_params));
-
-	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
-		perf->bw_ctl = 0;
-		perf->max_per_pipe_ib = 0;
-		perf->core_clk_rate = 0;
-	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
-		perf->bw_ctl = kms->perf.fix_core_ab_vote;
-		perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
-		perf->core_clk_rate = kms->perf.fix_core_clk_rate;
-	} else {
-		perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
-		perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
-		perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
-	}
+	perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
+	perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
+	perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
 
 	DRM_DEBUG_ATOMIC(
 		"crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
@@ -236,17 +224,28 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 	struct dpu_core_perf_params perf = { 0 };
 	int i, ret = 0;
 	u32 avg_bw;
+	u32 peak_bw;
 
 	if (!kms->num_paths)
 		return 0;
 
-	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
+	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
+		avg_bw = 0;
+		peak_bw = 0;
+	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
+		avg_bw = kms->perf.fix_core_ab_vote;
+		peak_bw = kms->perf.fix_core_ib_vote;
+	} else {
+		dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
+
+		avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
+		peak_bw = perf.max_per_pipe_ib;
+	}
 
-	avg_bw = perf.bw_ctl;
-	do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/
+	avg_bw /= kms->num_paths;
 
 	for (i = 0; i < kms->num_paths; i++)
-		icc_set_bw(kms->path[i], avg_bw, perf.max_per_pipe_ib);
+		icc_set_bw(kms->path[i], avg_bw, peak_bw);
 
 	return ret;
 }
-- 
2.39.2

[PATCH v2 06/14] drm/msm/dpu: rework core_perf debugfs overrides

[Dmitry Baryshkov]

Currently debugfs provides separate 'modes' to override calculated
MDP_CLK rate and interconnect bandwidth votes. Change that to allow
overriding individual values (e.g. one can override just clock or just
average bandwidth vote).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 87 ++-----------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 10 ---
 2 files changed, 9 insertions(+), 88 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 42c03a5f1f3e..23a29f159eff 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -17,20 +17,6 @@
 #include "dpu_crtc.h"
 #include "dpu_core_perf.h"
 
-/**
- * enum dpu_perf_mode - performance tuning mode
- * @DPU_PERF_MODE_NORMAL: performance controlled by user mode client
- * @DPU_PERF_MODE_MINIMUM: performance bounded by minimum setting
- * @DPU_PERF_MODE_FIXED: performance bounded by fixed setting
- * @DPU_PERF_MODE_MAX: maximum value, used for error checking
- */
-enum dpu_perf_mode {
-	DPU_PERF_MODE_NORMAL,
-	DPU_PERF_MODE_MINIMUM,
-	DPU_PERF_MODE_FIXED,
-	DPU_PERF_MODE_MAX
-};
-
 /**
  * _dpu_core_perf_calc_bw() - to calculate BW per crtc
  * @kms:  pointer to the dpu_kms
@@ -229,18 +215,16 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 	if (!kms->num_paths)
 		return 0;
 
-	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
-		avg_bw = 0;
-		peak_bw = 0;
-	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
+	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
+
+	avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
+	peak_bw = perf.max_per_pipe_ib;
+
+	if (kms->perf.fix_core_ab_vote)
 		avg_bw = kms->perf.fix_core_ab_vote;
-		peak_bw = kms->perf.fix_core_ib_vote;
-	} else {
-		dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
 
-		avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
-		peak_bw = perf.max_per_pipe_ib;
-	}
+	if (kms->perf.fix_core_ib_vote)
+		peak_bw = kms->perf.fix_core_ib_vote;
 
 	avg_bw /= kms->num_paths;
 
@@ -294,12 +278,9 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
 	struct drm_crtc *crtc;
 	struct dpu_crtc_state *dpu_cstate;
 
-	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED)
+	if (kms->perf.fix_core_clk_rate)
 		return kms->perf.fix_core_clk_rate;
 
-	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM)
-		return kms->perf.max_core_clk_rate;
-
 	drm_for_each_crtc(crtc, kms->dev) {
 		if (crtc->enabled) {
 			dpu_cstate = to_dpu_crtc_state(crtc->state);
@@ -416,54 +397,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 
 #ifdef CONFIG_DEBUG_FS
 
-static ssize_t _dpu_core_perf_mode_write(struct file *file,
-		    const char __user *user_buf, size_t count, loff_t *ppos)
-{
-	struct dpu_core_perf *perf = file->private_data;
-	u32 perf_mode = 0;
-	int ret;
-
-	ret = kstrtouint_from_user(user_buf, count, 0, &perf_mode);
-	if (ret)
-		return ret;
-
-	if (perf_mode >= DPU_PERF_MODE_MAX)
-		return -EINVAL;
-
-	if (perf_mode == DPU_PERF_MODE_FIXED) {
-		DRM_INFO("fix performance mode\n");
-	} else if (perf_mode == DPU_PERF_MODE_MINIMUM) {
-		/* run the driver with max clk and BW vote */
-		DRM_INFO("minimum performance mode\n");
-	} else if (perf_mode == DPU_PERF_MODE_NORMAL) {
-		/* reset the perf tune params to 0 */
-		DRM_INFO("normal performance mode\n");
-	}
-	perf->perf_tune.mode = perf_mode;
-
-	return count;
-}
-
-static ssize_t _dpu_core_perf_mode_read(struct file *file,
-			char __user *buff, size_t count, loff_t *ppos)
-{
-	struct dpu_core_perf *perf = file->private_data;
-	int len;
-	char buf[128];
-
-	len = scnprintf(buf, sizeof(buf),
-			"mode %d\n",
-			perf->perf_tune.mode);
-
-	return simple_read_from_buffer(buff, count, ppos, buf, len);
-}
-
-static const struct file_operations dpu_core_perf_mode_fops = {
-	.open = simple_open,
-	.read = _dpu_core_perf_mode_read,
-	.write = _dpu_core_perf_mode_write,
-};
-
 int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
 {
 	struct dpu_core_perf *perf = &dpu_kms->perf;
@@ -488,8 +421,6 @@ int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
 			(u32 *)&catalog->perf->min_llcc_ib);
 	debugfs_create_u32("min_dram_ib", 0600, entry,
 			(u32 *)&catalog->perf->min_dram_ib);
-	debugfs_create_file("perf_mode", 0600, entry,
-			(u32 *)perf, &dpu_core_perf_mode_fops);
 	debugfs_create_u64("fix_core_clk_rate", 0600, entry,
 			&perf->fix_core_clk_rate);
 	debugfs_create_u64("fix_core_ib_vote", 0600, entry,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index c965dfbc3007..1b791b170c6b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -26,14 +26,6 @@ struct dpu_core_perf_params {
 	u64 core_clk_rate;
 };
 
-/**
- * struct dpu_core_perf_tune - definition of performance tuning control
- * @mode: performance mode
- */
-struct dpu_core_perf_tune {
-	u32 mode;
-};
-
 /**
  * struct dpu_core_perf - definition of core performance context
  * @dev: Pointer to drm device
@@ -42,7 +34,6 @@ struct dpu_core_perf_tune {
  * @core_clk: Pointer to the core clock
  * @core_clk_rate: current core clock rate
  * @max_core_clk_rate: maximum allowable core clock rate
- * @perf_tune: debug control for performance tuning
  * @enable_bw_release: debug control for bandwidth release
  * @fix_core_clk_rate: fixed core clock request in Hz used in mode 2
  * @fix_core_ib_vote: fixed core ib vote in bps used in mode 2
@@ -55,7 +46,6 @@ struct dpu_core_perf {
 	struct clk *core_clk;
 	u64 core_clk_rate;
 	u64 max_core_clk_rate;
-	struct dpu_core_perf_tune perf_tune;
 	u32 enable_bw_release;
 	u64 fix_core_clk_rate;
 	u64 fix_core_ib_vote;
-- 
2.39.2

[PATCH v2 07/14] drm/msm/dpu: drop dpu_core_perf_params::max_per_pipe_ib

[Dmitry Baryshkov]

The max_per_pipe_ib is a constant across all CRTCs and is read from the
catalog. Drop corresponding calculations and read the value directly at
icc_set_bw() time.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 17 +++++------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  2 --
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c      |  2 --
 3 files changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 23a29f159eff..fe4d7e08ac1d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -103,13 +103,12 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
 	}
 
 	perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
-	perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
 	perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
 
 	DRM_DEBUG_ATOMIC(
-		"crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
+		"crtc=%d clk_rate=%llu core_ab=%llu\n",
 			crtc->base.id, perf->core_clk_rate,
-			perf->max_per_pipe_ib, perf->bw_ctl);
+			perf->bw_ctl);
 }
 
 int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
@@ -192,9 +191,6 @@ static void dpu_core_perf_aggregate(struct drm_device *ddev,
 		    curr_client_type == dpu_crtc_get_client_type(tmp_crtc)) {
 			dpu_cstate = to_dpu_crtc_state(tmp_crtc->state);
 
-			perf->max_per_pipe_ib = max(perf->max_per_pipe_ib,
-						    dpu_cstate->new_perf.max_per_pipe_ib);
-
 			perf->bw_ctl += dpu_cstate->new_perf.bw_ctl;
 
 			DRM_DEBUG_ATOMIC("crtc=%d bw=%llu\n",
@@ -218,7 +214,7 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
 
 	avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
-	peak_bw = perf.max_per_pipe_ib;
+	peak_bw = kms->catalog->perf->min_dram_ib;
 
 	if (kms->perf.fix_core_ab_vote)
 		avg_bw = kms->perf.fix_core_ab_vote;
@@ -333,15 +329,12 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 		 * 2. new bandwidth vote - "ab or ib vote" is lower
 		 *    than current vote at end of commit or stop.
 		 */
-		if ((params_changed && ((new->bw_ctl > old->bw_ctl) ||
-			(new->max_per_pipe_ib > old->max_per_pipe_ib)))	||
-			(!params_changed && ((new->bw_ctl < old->bw_ctl) ||
-			(new->max_per_pipe_ib < old->max_per_pipe_ib)))) {
+		if ((params_changed && new->bw_ctl > old->bw_ctl) ||
+		    (!params_changed && new->bw_ctl < old->bw_ctl)) {
 			DRM_DEBUG_ATOMIC("crtc=%d p=%d new_bw=%llu,old_bw=%llu\n",
 				crtc->base.id, params_changed,
 				new->bw_ctl, old->bw_ctl);
 			old->bw_ctl = new->bw_ctl;
-			old->max_per_pipe_ib = new->max_per_pipe_ib;
 			update_bus = true;
 		}
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 1b791b170c6b..4f362bb6a520 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -16,12 +16,10 @@
 
 /**
  * struct dpu_core_perf_params - definition of performance parameters
- * @max_per_pipe_ib: maximum instantaneous bandwidth request
  * @bw_ctl: arbitrated bandwidth request
  * @core_clk_rate: core clock rate request
  */
 struct dpu_core_perf_params {
-	u64 max_per_pipe_ib;
 	u64 bw_ctl;
 	u64 core_clk_rate;
 };
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 1edf2b6b0a26..ff5d306b95ed 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -1400,8 +1400,6 @@ static int dpu_crtc_debugfs_state_show(struct seq_file *s, void *v)
 	seq_printf(s, "core_clk_rate: %llu\n",
 			dpu_crtc->cur_perf.core_clk_rate);
 	seq_printf(s, "bw_ctl: %llu\n", dpu_crtc->cur_perf.bw_ctl);
-	seq_printf(s, "max_per_pipe_ib: %llu\n",
-				dpu_crtc->cur_perf.max_per_pipe_ib);
 
 	return 0;
 }
-- 
2.39.2

[PATCH v2 08/14] drm/msm/dpu: rework indentation in dpu_core_perf

[Dmitry Baryshkov]

dpu_core_perf.c contains several multi-line conditions which are hard to
comprehent because of the indentation. Rework the identation of these
conditions to make it easier to understand them.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index fe4d7e08ac1d..bdd00c3af1c6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -146,8 +146,8 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 
 	drm_for_each_crtc(tmp_crtc, crtc->dev) {
 		if (tmp_crtc->enabled &&
-		    (dpu_crtc_get_client_type(tmp_crtc) ==
-				curr_client_type) && (tmp_crtc != crtc)) {
+		    dpu_crtc_get_client_type(tmp_crtc) == curr_client_type &&
+		    tmp_crtc != crtc) {
 			struct dpu_crtc_state *tmp_cstate =
 				to_dpu_crtc_state(tmp_crtc->state);
 
@@ -338,10 +338,8 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 			update_bus = true;
 		}
 
-		if ((params_changed &&
-			(new->core_clk_rate > old->core_clk_rate)) ||
-			(!params_changed &&
-			(new->core_clk_rate < old->core_clk_rate))) {
+		if ((params_changed && new->core_clk_rate > old->core_clk_rate) ||
+		    (!params_changed && new->core_clk_rate < old->core_clk_rate)) {
 			old->core_clk_rate = new->core_clk_rate;
 			update_clk = true;
 		}
-- 
2.39.2

[PATCH v2 09/14] drm/msm/dpu: drop the dpu_core_perf_crtc_update()'s stop_req param

[Dmitry Baryshkov]

The stop_req is true only in the dpu_crtc_disable() case, when
crtc->enable has already been set to false. This renders the stop_req
argument useless. Remove it completely.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 12 ++++++------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  3 +--
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c      |  6 +++---
 3 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index bdd00c3af1c6..f15efaaaf9fa 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -291,7 +291,7 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
 }
 
 int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
-		int params_changed, bool stop_req)
+			      int params_changed)
 {
 	struct dpu_core_perf_params *new, *old;
 	bool update_bus = false, update_clk = false;
@@ -315,13 +315,13 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 	dpu_crtc = to_dpu_crtc(crtc);
 	dpu_cstate = to_dpu_crtc_state(crtc->state);
 
-	DRM_DEBUG_ATOMIC("crtc:%d stop_req:%d core_clk:%llu\n",
-			crtc->base.id, stop_req, kms->perf.core_clk_rate);
+	DRM_DEBUG_ATOMIC("crtc:%d enabled:%d core_clk:%llu\n",
+			crtc->base.id, crtc->enabled, kms->perf.core_clk_rate);
 
 	old = &dpu_crtc->cur_perf;
 	new = &dpu_cstate->new_perf;
 
-	if (crtc->enabled && !stop_req) {
+	if (crtc->enabled) {
 		/*
 		 * cases for bus bandwidth update.
 		 * 1. new bandwidth vote - "ab or ib vote" is higher
@@ -351,7 +351,7 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 	}
 
 	trace_dpu_perf_crtc_update(crtc->base.id, new->bw_ctl,
-		new->core_clk_rate, stop_req, update_bus, update_clk);
+		new->core_clk_rate, !crtc->enabled, update_bus, update_clk);
 
 	if (update_bus) {
 		ret = _dpu_core_perf_crtc_update_bus(kms, crtc);
@@ -371,7 +371,7 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 
 		DRM_DEBUG_ATOMIC("clk:%llu\n", clk_rate);
 
-		trace_dpu_core_perf_update_clk(kms->dev, stop_req, clk_rate);
+		trace_dpu_core_perf_update_clk(kms->dev, !crtc->enabled, clk_rate);
 
 		clk_rate = min(clk_rate, kms->perf.max_core_clk_rate);
 		ret = dev_pm_opp_set_rate(&kms->pdev->dev, clk_rate);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 4f362bb6a520..0b8c527f489e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -63,11 +63,10 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
  * dpu_core_perf_crtc_update - update performance of the given crtc
  * @crtc: Pointer to crtc
  * @params_changed: true if crtc parameters are modified
- * @stop_req: true if this is a stop request
  * return: zero if success, or error code otherwise
  */
 int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
-		int params_changed, bool stop_req);
+			      int params_changed);
 
 /**
  * dpu_core_perf_crtc_release_bw - release bandwidth of the given crtc
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index ff5d306b95ed..214229d11e3e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -718,7 +718,7 @@ static void dpu_crtc_frame_event_cb(void *data, u32 event)
 void dpu_crtc_complete_commit(struct drm_crtc *crtc)
 {
 	trace_dpu_crtc_complete_commit(DRMID(crtc));
-	dpu_core_perf_crtc_update(crtc, 0, false);
+	dpu_core_perf_crtc_update(crtc, 0);
 	_dpu_crtc_complete_flip(crtc);
 }
 
@@ -884,7 +884,7 @@ static void dpu_crtc_atomic_flush(struct drm_crtc *crtc,
 		return;
 
 	/* update performance setting before crtc kickoff */
-	dpu_core_perf_crtc_update(crtc, 1, false);
+	dpu_core_perf_crtc_update(crtc, 1);
 
 	/*
 	 * Final plane updates: Give each plane a chance to complete all
@@ -1100,7 +1100,7 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
 		atomic_set(&dpu_crtc->frame_pending, 0);
 	}
 
-	dpu_core_perf_crtc_update(crtc, 0, true);
+	dpu_core_perf_crtc_update(crtc, 0);
 
 	drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
 		dpu_encoder_register_frame_event_callback(encoder, NULL, NULL);
-- 
2.39.2

[PATCH v2 10/14] drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code

[Dmitry Baryshkov]

Simplify dpu_core_perf code by using only dpu_perf_cfg instead of using
full-featured catalog data.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 58 +++++++------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  8 +--
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  2 +-
 3 files changed, 27 insertions(+), 41 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index f15efaaaf9fa..e9c7d398d9cb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -19,11 +19,11 @@
 
 /**
  * _dpu_core_perf_calc_bw() - to calculate BW per crtc
- * @kms:  pointer to the dpu_kms
+ * @perf_cfg: performance configuration
  * @crtc: pointer to a crtc
  * Return: returns aggregated BW for all planes in crtc.
  */
-static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
+static u64 _dpu_core_perf_calc_bw(const struct dpu_perf_cfg *perf_cfg,
 		struct drm_crtc *crtc)
 {
 	struct drm_plane *plane;
@@ -39,7 +39,7 @@ static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
 		crtc_plane_bw += pstate->plane_fetch_bw;
 	}
 
-	bw_factor = kms->catalog->perf->bw_inefficiency_factor;
+	bw_factor = perf_cfg->bw_inefficiency_factor;
 	if (bw_factor) {
 		crtc_plane_bw *= bw_factor;
 		do_div(crtc_plane_bw, 100);
@@ -50,12 +50,12 @@ static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
 
 /**
  * _dpu_core_perf_calc_clk() - to calculate clock per crtc
- * @kms:  pointer to the dpu_kms
+ * @perf_cfg: performance configuration
  * @crtc: pointer to a crtc
  * @state: pointer to a crtc state
  * Return: returns max clk for all planes in crtc.
  */
-static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
+static u64 _dpu_core_perf_calc_clk(const struct dpu_perf_cfg *perf_cfg,
 		struct drm_crtc *crtc, struct drm_crtc_state *state)
 {
 	struct drm_plane *plane;
@@ -76,7 +76,7 @@ static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
 		crtc_clk = max(pstate->plane_clk, crtc_clk);
 	}
 
-	clk_factor = kms->catalog->perf->clk_inefficiency_factor;
+	clk_factor = perf_cfg->clk_inefficiency_factor;
 	if (clk_factor) {
 		crtc_clk *= clk_factor;
 		do_div(crtc_clk, 100);
@@ -92,18 +92,18 @@ static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc)
 	return to_dpu_kms(priv->kms);
 }
 
-static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
+static void _dpu_core_perf_calc_crtc(const struct dpu_perf_cfg *perf_cfg,
 		struct drm_crtc *crtc,
 		struct drm_crtc_state *state,
 		struct dpu_core_perf_params *perf)
 {
-	if (!kms || !kms->catalog || !crtc || !state || !perf) {
+	if (!perf_cfg || !crtc || !state || !perf) {
 		DPU_ERROR("invalid parameters\n");
 		return;
 	}
 
-	perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
-	perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
+	perf->bw_ctl = _dpu_core_perf_calc_bw(perf_cfg, crtc);
+	perf->core_clk_rate = _dpu_core_perf_calc_clk(perf_cfg, crtc, state);
 
 	DRM_DEBUG_ATOMIC(
 		"crtc=%d clk_rate=%llu core_ab=%llu\n",
@@ -120,6 +120,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 	struct dpu_crtc_state *dpu_cstate;
 	struct drm_crtc *tmp_crtc;
 	struct dpu_kms *kms;
+	const struct dpu_perf_cfg *perf_cfg;
 
 	if (!crtc || !state) {
 		DPU_ERROR("invalid crtc\n");
@@ -127,10 +128,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 	}
 
 	kms = _dpu_crtc_get_kms(crtc);
-	if (!kms->catalog) {
-		DPU_ERROR("invalid parameters\n");
-		return 0;
-	}
+	perf_cfg = kms->perf.perf_cfg;
 
 	/* we only need bandwidth check on real-time clients (interfaces) */
 	if (dpu_crtc_get_client_type(crtc) == NRT_CLIENT)
@@ -139,7 +137,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 	dpu_cstate = to_dpu_crtc_state(state);
 
 	/* obtain new values */
-	_dpu_core_perf_calc_crtc(kms, crtc, state, &dpu_cstate->new_perf);
+	_dpu_core_perf_calc_crtc(perf_cfg, crtc, state, &dpu_cstate->new_perf);
 
 	bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
 	curr_client_type = dpu_crtc_get_client_type(crtc);
@@ -162,7 +160,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 		bw = DIV_ROUND_UP_ULL(bw_sum_of_intfs, 1000);
 		DRM_DEBUG_ATOMIC("calculated bandwidth=%uk\n", bw);
 
-		threshold = kms->catalog->perf->max_bw_high;
+		threshold = perf_cfg->max_bw_high;
 
 		DRM_DEBUG_ATOMIC("final threshold bw limit = %d\n", threshold);
 
@@ -214,7 +212,7 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
 
 	avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
-	peak_bw = kms->catalog->perf->min_dram_ib;
+	peak_bw = kms->perf.perf_cfg->min_dram_ib;
 
 	if (kms->perf.fix_core_ab_vote)
 		avg_bw = kms->perf.fix_core_ab_vote;
@@ -248,12 +246,6 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
 		return;
 	}
 
-	kms = _dpu_crtc_get_kms(crtc);
-	if (!kms->catalog) {
-		DPU_ERROR("invalid kms\n");
-		return;
-	}
-
 	dpu_crtc = to_dpu_crtc(crtc);
 
 	if (atomic_dec_return(&kms->bandwidth_ref) > 0)
@@ -307,10 +299,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 	}
 
 	kms = _dpu_crtc_get_kms(crtc);
-	if (!kms->catalog) {
-		DPU_ERROR("invalid kms\n");
-		return -EINVAL;
-	}
 
 	dpu_crtc = to_dpu_crtc(crtc);
 	dpu_cstate = to_dpu_crtc_state(crtc->state);
@@ -391,7 +379,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
 {
 	struct dpu_core_perf *perf = &dpu_kms->perf;
-	const struct dpu_mdss_cfg *catalog = perf->catalog;
 	struct dentry *entry;
 
 	entry = debugfs_create_dir("core_perf", parent);
@@ -403,15 +390,15 @@ int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
 	debugfs_create_u32("enable_bw_release", 0600, entry,
 			(u32 *)&perf->enable_bw_release);
 	debugfs_create_u32("threshold_low", 0600, entry,
-			(u32 *)&catalog->perf->max_bw_low);
+			(u32 *)&perf->perf_cfg->max_bw_low);
 	debugfs_create_u32("threshold_high", 0600, entry,
-			(u32 *)&catalog->perf->max_bw_high);
+			(u32 *)&perf->perf_cfg->max_bw_high);
 	debugfs_create_u32("min_core_ib", 0600, entry,
-			(u32 *)&catalog->perf->min_core_ib);
+			(u32 *)&perf->perf_cfg->min_core_ib);
 	debugfs_create_u32("min_llcc_ib", 0600, entry,
-			(u32 *)&catalog->perf->min_llcc_ib);
+			(u32 *)&perf->perf_cfg->min_llcc_ib);
 	debugfs_create_u32("min_dram_ib", 0600, entry,
-			(u32 *)&catalog->perf->min_dram_ib);
+			(u32 *)&perf->perf_cfg->min_dram_ib);
 	debugfs_create_u64("fix_core_clk_rate", 0600, entry,
 			&perf->fix_core_clk_rate);
 	debugfs_create_u64("fix_core_ib_vote", 0600, entry,
@@ -432,17 +419,16 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf)
 
 	perf->max_core_clk_rate = 0;
 	perf->core_clk = NULL;
-	perf->catalog = NULL;
 	perf->dev = NULL;
 }
 
 int dpu_core_perf_init(struct dpu_core_perf *perf,
 		struct drm_device *dev,
-		const struct dpu_mdss_cfg *catalog,
+		const struct dpu_perf_cfg *perf_cfg,
 		struct clk *core_clk)
 {
 	perf->dev = dev;
-	perf->catalog = catalog;
+	perf->perf_cfg = perf_cfg;
 	perf->core_clk = core_clk;
 
 	perf->max_core_clk_rate = clk_get_rate(core_clk);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 0b8c527f489e..4490120d11d4 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -28,7 +28,7 @@ struct dpu_core_perf_params {
  * struct dpu_core_perf - definition of core performance context
  * @dev: Pointer to drm device
  * @debugfs_root: top level debug folder
- * @catalog: Pointer to catalog configuration
+ * @perf_cfg: Platform-specific performance configuration
  * @core_clk: Pointer to the core clock
  * @core_clk_rate: current core clock rate
  * @max_core_clk_rate: maximum allowable core clock rate
@@ -40,7 +40,7 @@ struct dpu_core_perf_params {
 struct dpu_core_perf {
 	struct drm_device *dev;
 	struct dentry *debugfs_root;
-	const struct dpu_mdss_cfg *catalog;
+	const struct dpu_perf_cfg *perf_cfg;
 	struct clk *core_clk;
 	u64 core_clk_rate;
 	u64 max_core_clk_rate;
@@ -84,12 +84,12 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf);
  * dpu_core_perf_init - initialize the given core performance context
  * @perf: Pointer to core performance context
  * @dev: Pointer to drm device
- * @catalog: Pointer to catalog
+ * @perf_cfg: Pointer to platform performance configuration
  * @core_clk: pointer to core clock
  */
 int dpu_core_perf_init(struct dpu_core_perf *perf,
 		struct drm_device *dev,
-		const struct dpu_mdss_cfg *catalog,
+		const struct dpu_perf_cfg *perf_cfg,
 		struct clk *core_clk);
 
 struct dpu_kms;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index aa8499de1b9f..6e62606e32de 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1115,7 +1115,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 		dpu_kms->hw_vbif[vbif->id] = hw;
 	}
 
-	rc = dpu_core_perf_init(&dpu_kms->perf, dev, dpu_kms->catalog,
+	rc = dpu_core_perf_init(&dpu_kms->perf, dev, dpu_kms->catalog->perf,
 			msm_clk_bulk_get_clock(dpu_kms->clocks, dpu_kms->num_clocks, "core"));
 	if (rc) {
 		DPU_ERROR("failed to init perf %d\n", rc);
-- 
2.39.2

[PATCH v2 11/14] drm/msm/dpu: remove unused fields from struct dpu_core_perf

[Dmitry Baryshkov]

Remove dpu_core_perf::dev and dpu_core_perf::debugfs_root fields, they
are not used by the code.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 3 ---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 6 ------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 2 +-
 3 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index e9c7d398d9cb..906611f6b879 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -419,15 +419,12 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf)
 
 	perf->max_core_clk_rate = 0;
 	perf->core_clk = NULL;
-	perf->dev = NULL;
 }
 
 int dpu_core_perf_init(struct dpu_core_perf *perf,
-		struct drm_device *dev,
 		const struct dpu_perf_cfg *perf_cfg,
 		struct clk *core_clk)
 {
-	perf->dev = dev;
 	perf->perf_cfg = perf_cfg;
 	perf->core_clk = core_clk;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 4490120d11d4..7c5142aca4ee 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -26,8 +26,6 @@ struct dpu_core_perf_params {
 
 /**
  * struct dpu_core_perf - definition of core performance context
- * @dev: Pointer to drm device
- * @debugfs_root: top level debug folder
  * @perf_cfg: Platform-specific performance configuration
  * @core_clk: Pointer to the core clock
  * @core_clk_rate: current core clock rate
@@ -38,8 +36,6 @@ struct dpu_core_perf_params {
  * @fix_core_ab_vote: fixed core ab vote in bps used in mode 2
  */
 struct dpu_core_perf {
-	struct drm_device *dev;
-	struct dentry *debugfs_root;
 	const struct dpu_perf_cfg *perf_cfg;
 	struct clk *core_clk;
 	u64 core_clk_rate;
@@ -83,12 +79,10 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf);
 /**
  * dpu_core_perf_init - initialize the given core performance context
  * @perf: Pointer to core performance context
- * @dev: Pointer to drm device
  * @perf_cfg: Pointer to platform performance configuration
  * @core_clk: pointer to core clock
  */
 int dpu_core_perf_init(struct dpu_core_perf *perf,
-		struct drm_device *dev,
 		const struct dpu_perf_cfg *perf_cfg,
 		struct clk *core_clk);
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 6e62606e32de..631b6b679bae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1115,7 +1115,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 		dpu_kms->hw_vbif[vbif->id] = hw;
 	}
 
-	rc = dpu_core_perf_init(&dpu_kms->perf, dev, dpu_kms->catalog->perf,
+	rc = dpu_core_perf_init(&dpu_kms->perf, dpu_kms->catalog->perf,
 			msm_clk_bulk_get_clock(dpu_kms->clocks, dpu_kms->num_clocks, "core"));
 	if (rc) {
 		DPU_ERROR("failed to init perf %d\n", rc);
-- 
2.39.2

[PATCH v2 12/14] drm/msm/dpu: core_perf: remove extra clk_round_rate() call

[Dmitry Baryshkov]

The dev_pm_opp_set_rate() already contains a call for clk_round_rate for
the passed value. Stop calling it manually from
_dpu_core_perf_get_core_clk_rate(). It is slightly incorrect to call it
this way, as we should round the final calculated clock rate rather than
rounding all the intermediate values.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 906611f6b879..d533b63f90f6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -274,8 +274,6 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
 			dpu_cstate = to_dpu_crtc_state(crtc->state);
 			clk_rate = max(dpu_cstate->new_perf.core_clk_rate,
 							clk_rate);
-			clk_rate = clk_round_rate(kms->perf.core_clk,
-					clk_rate);
 		}
 	}
 
-- 
2.39.2

[PATCH v2 13/14] drm/msm/dpu: move max clock decision to dpu_kms.

[Dmitry Baryshkov]

dpu_core_perf should not make decisions on the maximum possible core
clock rate. Pass the value from dpu_kms_hw_init().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 11 ++---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  8 ++------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 13 +++++++++++--
 3 files changed, 15 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index d533b63f90f6..608c915a2cab 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -416,21 +416,14 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf)
 	}
 
 	perf->max_core_clk_rate = 0;
-	perf->core_clk = NULL;
 }
 
 int dpu_core_perf_init(struct dpu_core_perf *perf,
 		const struct dpu_perf_cfg *perf_cfg,
-		struct clk *core_clk)
+		unsigned long max_core_clk_rate)
 {
 	perf->perf_cfg = perf_cfg;
-	perf->core_clk = core_clk;
-
-	perf->max_core_clk_rate = clk_get_rate(core_clk);
-	if (!perf->max_core_clk_rate) {
-		DPU_DEBUG("optional max core clk rate, use default\n");
-		perf->max_core_clk_rate = DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE;
-	}
+	perf->max_core_clk_rate = max_core_clk_rate;
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 7c5142aca4ee..df1fcf28f2a9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -12,8 +12,6 @@
 
 #include "dpu_hw_catalog.h"
 
-#define	DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE	412500000
-
 /**
  * struct dpu_core_perf_params - definition of performance parameters
  * @bw_ctl: arbitrated bandwidth request
@@ -27,7 +25,6 @@ struct dpu_core_perf_params {
 /**
  * struct dpu_core_perf - definition of core performance context
  * @perf_cfg: Platform-specific performance configuration
- * @core_clk: Pointer to the core clock
  * @core_clk_rate: current core clock rate
  * @max_core_clk_rate: maximum allowable core clock rate
  * @enable_bw_release: debug control for bandwidth release
@@ -37,7 +34,6 @@ struct dpu_core_perf_params {
  */
 struct dpu_core_perf {
 	const struct dpu_perf_cfg *perf_cfg;
-	struct clk *core_clk;
 	u64 core_clk_rate;
 	u64 max_core_clk_rate;
 	u32 enable_bw_release;
@@ -80,11 +76,11 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf);
  * dpu_core_perf_init - initialize the given core performance context
  * @perf: Pointer to core performance context
  * @perf_cfg: Pointer to platform performance configuration
- * @core_clk: pointer to core clock
+ * @max_core_clk_rate: Maximum core clock rate
  */
 int dpu_core_perf_init(struct dpu_core_perf *perf,
 		const struct dpu_perf_cfg *perf_cfg,
-		struct clk *core_clk);
+		unsigned long max_core_clk_rate);
 
 struct dpu_kms;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 631b6b679bae..f01b2278c01a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1011,11 +1011,14 @@ unsigned long dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name)
 	return clk_get_rate(clk);
 }
 
+#define	DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE	412500000
+
 static int dpu_kms_hw_init(struct msm_kms *kms)
 {
 	struct dpu_kms *dpu_kms;
 	struct drm_device *dev;
 	int i, rc = -EINVAL;
+	unsigned long max_core_clk_rate;
 	u32 core_rev;
 
 	if (!kms) {
@@ -1115,8 +1118,14 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 		dpu_kms->hw_vbif[vbif->id] = hw;
 	}
 
-	rc = dpu_core_perf_init(&dpu_kms->perf, dpu_kms->catalog->perf,
-			msm_clk_bulk_get_clock(dpu_kms->clocks, dpu_kms->num_clocks, "core"));
+	/* TODO: use the same max_freq as in dpu_kms_hw_init */
+	max_core_clk_rate = dpu_kms_get_clk_rate(dpu_kms, "core");
+	if (!max_core_clk_rate) {
+		DPU_DEBUG("max core clk rate not determined, using default\n");
+		max_core_clk_rate = DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE;
+	}
+
+	rc = dpu_core_perf_init(&dpu_kms->perf, dpu_kms->catalog->perf, max_core_clk_rate);
 	if (rc) {
 		DPU_ERROR("failed to init perf %d\n", rc);
 		goto perf_err;
-- 
2.39.2

[PATCH v2 14/14] drm/msm/dpu: drop dpu_core_perf_destroy()

[Dmitry Baryshkov]

This function does nothing, just clears several data pointers. Drop it
now.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 10 ----------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  6 ------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  1 -
 3 files changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 608c915a2cab..4b8127932e13 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -408,16 +408,6 @@ int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
 }
 #endif
 
-void dpu_core_perf_destroy(struct dpu_core_perf *perf)
-{
-	if (!perf) {
-		DPU_ERROR("invalid parameters\n");
-		return;
-	}
-
-	perf->max_core_clk_rate = 0;
-}
-
 int dpu_core_perf_init(struct dpu_core_perf *perf,
 		const struct dpu_perf_cfg *perf_cfg,
 		unsigned long max_core_clk_rate)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index df1fcf28f2a9..a5a9c3389718 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -66,12 +66,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
  */
 void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc);
 
-/**
- * dpu_core_perf_destroy - destroy the given core performance context
- * @perf: Pointer to core performance context
- */
-void dpu_core_perf_destroy(struct dpu_core_perf *perf);
-
 /**
  * dpu_core_perf_init - initialize the given core performance context
  * @perf: Pointer to core performance context
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index f01b2278c01a..44b0daf70c4e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1171,7 +1171,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 	return 0;
 
 drm_obj_init_err:
-	dpu_core_perf_destroy(&dpu_kms->perf);
 hw_intr_init_err:
 perf_err:
 power_error:
-- 
2.39.2

Re: [PATCH v2 06/14] drm/msm/dpu: rework core_perf debugfs overrides

[Abhinav Kumar]

On 7/4/2023 8:03 AM, Dmitry Baryshkov wrote:
> Currently debugfs provides separate 'modes' to override calculated
> MDP_CLK rate and interconnect bandwidth votes. Change that to allow
> overriding individual values (e.g. one can override just clock or just
> average bandwidth vote).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Can you break this out into a separate series on its own?

I would like to spend more time on this and dont want to hold up the 
rest of the cleanup part of the series for this.

> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 87 ++-----------------
>   drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 10 ---
>   2 files changed, 9 insertions(+), 88 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 42c03a5f1f3e..23a29f159eff 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -17,20 +17,6 @@
>   #include "dpu_crtc.h"
>   #include "dpu_core_perf.h"
>   
> -/**
> - * enum dpu_perf_mode - performance tuning mode
> - * @DPU_PERF_MODE_NORMAL: performance controlled by user mode client
> - * @DPU_PERF_MODE_MINIMUM: performance bounded by minimum setting
> - * @DPU_PERF_MODE_FIXED: performance bounded by fixed setting
> - * @DPU_PERF_MODE_MAX: maximum value, used for error checking
> - */
> -enum dpu_perf_mode {
> -	DPU_PERF_MODE_NORMAL,
> -	DPU_PERF_MODE_MINIMUM,
> -	DPU_PERF_MODE_FIXED,
> -	DPU_PERF_MODE_MAX
> -};
> -
>   /**
>    * _dpu_core_perf_calc_bw() - to calculate BW per crtc
>    * @kms:  pointer to the dpu_kms
> @@ -229,18 +215,16 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
>   	if (!kms->num_paths)
>   		return 0;
>   
> -	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> -		avg_bw = 0;
> -		peak_bw = 0;
> -	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> +	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
> +
> +	avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
> +	peak_bw = perf.max_per_pipe_ib;
> +
> +	if (kms->perf.fix_core_ab_vote)
>   		avg_bw = kms->perf.fix_core_ab_vote;
> -		peak_bw = kms->perf.fix_core_ib_vote;
> -	} else {
> -		dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
>   
> -		avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
> -		peak_bw = perf.max_per_pipe_ib;
> -	}
> +	if (kms->perf.fix_core_ib_vote)
> +		peak_bw = kms->perf.fix_core_ib_vote;
>   
>   	avg_bw /= kms->num_paths;
>   
> @@ -294,12 +278,9 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
>   	struct drm_crtc *crtc;
>   	struct dpu_crtc_state *dpu_cstate;
>   
> -	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED)
> +	if (kms->perf.fix_core_clk_rate)
>   		return kms->perf.fix_core_clk_rate;
>   
> -	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM)
> -		return kms->perf.max_core_clk_rate;
> -
>   	drm_for_each_crtc(crtc, kms->dev) {
>   		if (crtc->enabled) {
>   			dpu_cstate = to_dpu_crtc_state(crtc->state);
> @@ -416,54 +397,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
>   
>   #ifdef CONFIG_DEBUG_FS
>   
> -static ssize_t _dpu_core_perf_mode_write(struct file *file,
> -		    const char __user *user_buf, size_t count, loff_t *ppos)
> -{
> -	struct dpu_core_perf *perf = file->private_data;
> -	u32 perf_mode = 0;
> -	int ret;
> -
> -	ret = kstrtouint_from_user(user_buf, count, 0, &perf_mode);
> -	if (ret)
> -		return ret;
> -
> -	if (perf_mode >= DPU_PERF_MODE_MAX)
> -		return -EINVAL;
> -
> -	if (perf_mode == DPU_PERF_MODE_FIXED) {
> -		DRM_INFO("fix performance mode\n");
> -	} else if (perf_mode == DPU_PERF_MODE_MINIMUM) {
> -		/* run the driver with max clk and BW vote */
> -		DRM_INFO("minimum performance mode\n");
> -	} else if (perf_mode == DPU_PERF_MODE_NORMAL) {
> -		/* reset the perf tune params to 0 */
> -		DRM_INFO("normal performance mode\n");
> -	}
> -	perf->perf_tune.mode = perf_mode;
> -
> -	return count;
> -}
> -
> -static ssize_t _dpu_core_perf_mode_read(struct file *file,
> -			char __user *buff, size_t count, loff_t *ppos)
> -{
> -	struct dpu_core_perf *perf = file->private_data;
> -	int len;
> -	char buf[128];
> -
> -	len = scnprintf(buf, sizeof(buf),
> -			"mode %d\n",
> -			perf->perf_tune.mode);
> -
> -	return simple_read_from_buffer(buff, count, ppos, buf, len);
> -}
> -
> -static const struct file_operations dpu_core_perf_mode_fops = {
> -	.open = simple_open,
> -	.read = _dpu_core_perf_mode_read,
> -	.write = _dpu_core_perf_mode_write,
> -};
> -
>   int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
>   {
>   	struct dpu_core_perf *perf = &dpu_kms->perf;
> @@ -488,8 +421,6 @@ int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
>   			(u32 *)&catalog->perf->min_llcc_ib);
>   	debugfs_create_u32("min_dram_ib", 0600, entry,
>   			(u32 *)&catalog->perf->min_dram_ib);
> -	debugfs_create_file("perf_mode", 0600, entry,
> -			(u32 *)perf, &dpu_core_perf_mode_fops);
>   	debugfs_create_u64("fix_core_clk_rate", 0600, entry,
>   			&perf->fix_core_clk_rate);
>   	debugfs_create_u64("fix_core_ib_vote", 0600, entry,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> index c965dfbc3007..1b791b170c6b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> @@ -26,14 +26,6 @@ struct dpu_core_perf_params {
>   	u64 core_clk_rate;
>   };
>   
> -/**
> - * struct dpu_core_perf_tune - definition of performance tuning control
> - * @mode: performance mode
> - */
> -struct dpu_core_perf_tune {
> -	u32 mode;
> -};
> -
>   /**
>    * struct dpu_core_perf - definition of core performance context
>    * @dev: Pointer to drm device
> @@ -42,7 +34,6 @@ struct dpu_core_perf_tune {
>    * @core_clk: Pointer to the core clock
>    * @core_clk_rate: current core clock rate
>    * @max_core_clk_rate: maximum allowable core clock rate
> - * @perf_tune: debug control for performance tuning
>    * @enable_bw_release: debug control for bandwidth release
>    * @fix_core_clk_rate: fixed core clock request in Hz used in mode 2
>    * @fix_core_ib_vote: fixed core ib vote in bps used in mode 2
> @@ -55,7 +46,6 @@ struct dpu_core_perf {
>   	struct clk *core_clk;
>   	u64 core_clk_rate;
>   	u64 max_core_clk_rate;
> -	struct dpu_core_perf_tune perf_tune;
>   	u32 enable_bw_release;
>   	u64 fix_core_clk_rate;
>   	u64 fix_core_ib_vote;

Re: [PATCH v2 05/14] drm/msm/dpu: handle perf mode in _dpu_core_perf_crtc_update_bus()

[Abhinav Kumar]

On 7/4/2023 8:03 AM, Dmitry Baryshkov wrote:
> Move perf mode handling for the bandwidth to
> _dpu_core_perf_crtc_update_bus() rather than overriding per-CRTC data
> and then aggregating known values.
> 
> Note, this changes the fix_core_ab_vote. Previously it would be
> multiplied per the CRTC number, now it will be used directly for
> interconnect voting.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Break this out into a separate series. This rework doesnt need to be 
part of this cleanup series.

> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 37 +++++++++----------
>   1 file changed, 18 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 348550ac7e51..42c03a5f1f3e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -116,21 +116,9 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
>   		return;
>   	}
>   
> -	memset(perf, 0, sizeof(struct dpu_core_perf_params));
> -
> -	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> -		perf->bw_ctl = 0;
> -		perf->max_per_pipe_ib = 0;
> -		perf->core_clk_rate = 0;
> -	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> -		perf->bw_ctl = kms->perf.fix_core_ab_vote;
> -		perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
> -		perf->core_clk_rate = kms->perf.fix_core_clk_rate;
> -	} else {
> -		perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
> -		perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
> -		perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
> -	}
> +	perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
> +	perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
> +	perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
>   
>   	DRM_DEBUG_ATOMIC(
>   		"crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
> @@ -236,17 +224,28 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
>   	struct dpu_core_perf_params perf = { 0 };
>   	int i, ret = 0;
>   	u32 avg_bw;
> +	u32 peak_bw;
>   
>   	if (!kms->num_paths)
>   		return 0;
>   
> -	dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
> +	if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> +		avg_bw = 0;
> +		peak_bw = 0;
> +	} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> +		avg_bw = kms->perf.fix_core_ab_vote;
> +		peak_bw = kms->perf.fix_core_ib_vote;
> +	} else {
> +		dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
> +
> +		avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
> +		peak_bw = perf.max_per_pipe_ib;
> +	}
>   
> -	avg_bw = perf.bw_ctl;
> -	do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/
> +	avg_bw /= kms->num_paths;
>   
>   	for (i = 0; i < kms->num_paths; i++)
> -		icc_set_bw(kms->path[i], avg_bw, perf.max_per_pipe_ib);
> +		icc_set_bw(kms->path[i], avg_bw, peak_bw);
>   
>   	return ret;
>   }

Re: [PATCH v2 14/14] drm/msm/dpu: drop dpu_core_perf_destroy()

[Abhinav Kumar]

On 7/4/2023 8:03 AM, Dmitry Baryshkov wrote:
> This function does nothing, just clears several data pointers. Drop it
> now.
> 

Now, it doesnt even do that. Just resets the clk_rate to 0.

> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 10 ----------
>   drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  6 ------
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  1 -
>   3 files changed, 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 608c915a2cab..4b8127932e13 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -408,16 +408,6 @@ int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent)
>   }
>   #endif
>   
> -void dpu_core_perf_destroy(struct dpu_core_perf *perf)
> -{
> -	if (!perf) {
> -		DPU_ERROR("invalid parameters\n");
> -		return;
> -	}
> -
> -	perf->max_core_clk_rate = 0;
> -}
> -
>   int dpu_core_perf_init(struct dpu_core_perf *perf,
>   		const struct dpu_perf_cfg *perf_cfg,
>   		unsigned long max_core_clk_rate)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> index df1fcf28f2a9..a5a9c3389718 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> @@ -66,12 +66,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
>    */
>   void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc);
>   
> -/**
> - * dpu_core_perf_destroy - destroy the given core performance context
> - * @perf: Pointer to core performance context
> - */
> -void dpu_core_perf_destroy(struct dpu_core_perf *perf);
> -
>   /**
>    * dpu_core_perf_init - initialize the given core performance context
>    * @perf: Pointer to core performance context
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index f01b2278c01a..44b0daf70c4e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1171,7 +1171,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>   	return 0;
>   
>   drm_obj_init_err:
> -	dpu_core_perf_destroy(&dpu_kms->perf);
>   hw_intr_init_err:
>   perf_err:
>   power_error:

Re: [PATCH v2 05/14] drm/msm/dpu: handle perf mode in _dpu_core_perf_crtc_update_bus()

[Dmitry Baryshkov]

On Tue, 4 Jul 2023 at 18:55, Abhinav Kumar <quic_abhinavk@quicinc.com> wrote:
>
>
>
> On 7/4/2023 8:03 AM, Dmitry Baryshkov wrote:
> > Move perf mode handling for the bandwidth to
> > _dpu_core_perf_crtc_update_bus() rather than overriding per-CRTC data
> > and then aggregating known values.
> >
> > Note, this changes the fix_core_ab_vote. Previously it would be
> > multiplied per the CRTC number, now it will be used directly for
> > interconnect voting.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> Break this out into a separate series. This rework doesnt need to be
> part of this cleanup series.

Sure, why not.

>
> > ---
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 37 +++++++++----------
> >   1 file changed, 18 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> > index 348550ac7e51..42c03a5f1f3e 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> > @@ -116,21 +116,9 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
> >               return;
> >       }
> >
> > -     memset(perf, 0, sizeof(struct dpu_core_perf_params));
> > -
> > -     if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> > -             perf->bw_ctl = 0;
> > -             perf->max_per_pipe_ib = 0;
> > -             perf->core_clk_rate = 0;
> > -     } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> > -             perf->bw_ctl = kms->perf.fix_core_ab_vote;
> > -             perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
> > -             perf->core_clk_rate = kms->perf.fix_core_clk_rate;
> > -     } else {
> > -             perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
> > -             perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
> > -             perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
> > -     }
> > +     perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
> > +     perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
> > +     perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
> >
> >       DRM_DEBUG_ATOMIC(
> >               "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
> > @@ -236,17 +224,28 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
> >       struct dpu_core_perf_params perf = { 0 };
> >       int i, ret = 0;
> >       u32 avg_bw;
> > +     u32 peak_bw;
> >
> >       if (!kms->num_paths)
> >               return 0;
> >
> > -     dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
> > +     if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> > +             avg_bw = 0;
> > +             peak_bw = 0;
> > +     } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> > +             avg_bw = kms->perf.fix_core_ab_vote;
> > +             peak_bw = kms->perf.fix_core_ib_vote;
> > +     } else {
> > +             dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
> > +
> > +             avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
> > +             peak_bw = perf.max_per_pipe_ib;
> > +     }
> >
> > -     avg_bw = perf.bw_ctl;
> > -     do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/
> > +     avg_bw /= kms->num_paths;
> >
> >       for (i = 0; i < kms->num_paths; i++)
> > -             icc_set_bw(kms->path[i], avg_bw, perf.max_per_pipe_ib);
> > +             icc_set_bw(kms->path[i], avg_bw, peak_bw);
> >
> >       return ret;
> >   }



-- 
With best wishes
Dmitry

Re: [PATCH v2 10/14] drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code

[kernel test robot]

Hi Dmitry,

kernel test robot noticed the following build warnings:

[auto build test WARNING on drm-misc/drm-misc-next]
[also build test WARNING on linus/master v6.4 next-20230705]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Dmitry-Baryshkov/drm-msm-dpu-drop-enum-dpu_core_perf_data_bus_id/20230704-230618
base:   git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link:    https://lore.kernel.org/r/20230704150354.159882-11-dmitry.baryshkov%40linaro.org
patch subject: [PATCH v2 10/14] drm/msm/dpu: use dpu_perf_cfg in DPU core_perf code
config: arm-defconfig (https://download.01.org/0day-ci/archive/20230706/202307060717.Jqn298i0-lkp@intel.com/config)
compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project.git f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce: (https://download.01.org/0day-ci/archive/20230706/202307060717.Jqn298i0-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202307060717.Jqn298i0-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:251:25: warning: variable 'kms' is uninitialized when used here [-Wuninitialized]
           if (atomic_dec_return(&kms->bandwidth_ref) > 0)
                                  ^~~
   drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:242:21: note: initialize the variable 'kms' to silence this warning
           struct dpu_kms *kms;
                              ^
                               = NULL
   1 warning generated.


vim +/kms +251 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c

25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  230  
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  231  /**
2785fd47959003 Lee Jones         2020-11-23  232   * dpu_core_perf_crtc_release_bw() - request zero bandwidth
2785fd47959003 Lee Jones         2020-11-23  233   * @crtc: pointer to a crtc
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  234   *
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  235   * Function checks a state variable for the crtc, if all pending commit
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  236   * requests are done, meaning no more bandwidth is needed, release
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  237   * bandwidth request.
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  238   */
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  239  void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  240  {
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  241  	struct dpu_crtc *dpu_crtc;
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  242  	struct dpu_kms *kms;
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  243  
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  244  	if (!crtc) {
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  245  		DPU_ERROR("invalid crtc\n");
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  246  		return;
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  247  	}
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  248  
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  249  	dpu_crtc = to_dpu_crtc(crtc);
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  250  
241b507c166fef Rob Clark         2019-08-20 @251  	if (atomic_dec_return(&kms->bandwidth_ref) > 0)
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  252  		return;
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  253  
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  254  	/* Release the bandwidth */
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  255  	if (kms->perf.enable_bw_release) {
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  256  		trace_dpu_cmd_release_bw(crtc->base.id);
5b702d787b47e1 Stephen Boyd      2021-04-30  257  		DRM_DEBUG_ATOMIC("Release BW crtc=%d\n", crtc->base.id);
cb88482e2570f6 Jayant Shekhar    2019-06-18  258  		dpu_crtc->cur_perf.bw_ctl = 0;
cb88482e2570f6 Jayant Shekhar    2019-06-18  259  		_dpu_core_perf_crtc_update_bus(kms, crtc);
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  260  	}
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  261  }
25fdd5933e4c0f Jeykumar Sankaran 2018-06-27  262  

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki