From: Benjamin Gaignard <benjamin.gaignard@collabora.com>
To: mchehab@kernel.org, tfiga@chromium.org, m.szyprowski@samsung.com,
ming.qian@nxp.com, ezequiel@vanguardiasur.com.ar,
p.zabel@pengutronix.de, gregkh@linuxfoundation.org,
hverkuil-cisco@xs4all.nl, nicolas.dufresne@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, kernel@collabora.com,
Benjamin Gaignard <benjamin.gaignard@collabora.com>
Subject: [PATCH v8 00/53] Add DELETE_BUF ioctl
Date: Wed, 27 Sep 2023 17:35:05 +0200 [thread overview]
Message-ID: <20230927153558.159278-1-benjamin.gaignard@collabora.com> (raw)
Unlike when resolution change on keyframes, dynamic resolution change
on inter frames doesn't allow to do a stream off/on sequence because
it is need to keep all previous references alive to decode inter frames.
This constraint have two main problems:
- more memory consumption.
- more buffers in use.
To solve these issue this series introduce DELETE_BUFS ioctl and remove
the 32 buffers limit per queue.
VP9 conformance tests using fluster give a score of 210/305.
The 24 resize inter tests (vp90-2-21-resize_inter_* files) are ok
but require to use postprocessor.
Kernel branch is available here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v8
GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution
change is here:
https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc
changes in version 8:
- Add V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS and new 'max_buffers' field in v4l2_create_buffers
structure to report the maximum number of buffers that a queue could allocate.
- Add V4L2_BUF_CAP_SUPPORTS_DELETE_BUFS to indicate that a queue support
DELETE_BUFS ioctl.
- Make some test drivers use more than 32 buffers and DELETE_BUFS ioctl.
- Fix remarks done by Hans
- Move "media: core: Rework how create_buf index returned value is
computed" patch to the top of the serie.
changes in version 7:
- Use a bitmap to know which entries are valid in queue bufs array.
The number of buffers in the queue could must calculated from the
bitmap so num_buffers becomes useless. This led to add quite few
patches to remove it from all the drivers.
Note: despiste my attention I may have miss some calls to
num_buffers...
- Split patches to make them more readable.
- Run v4l2-compliance with additional delete-bufs tests.
- Run ./test-media -kmemleak vivid and no more failures.
Note: I had to remove USERPTR streaming test because they to much
frequentely hit get_framevec bug. It is not related to my series
since this happens all the time on master branch.
- Fix Hans remarks on v6
changes in version 6:
- Get a patch per driver to use vb2_get_buffer() instead of directly access
to queue buffers array.
- Add lock in vb2_core_delete_buf()
- Use vb2_buffer instead of index
- Fix various comments
- Change buffer index name to BUFFER_INDEX_MASK
- Stop spamming kernel log with unbalanced counters
changes in version 5:
- Rework offset cookie encoding pattern is n ow the first patch of the
serie.
- Use static array instead of allocated one for postprocessor buffers.
changes in version 4:
- Stop using Xarray, instead let queues decide about their own maximum
number of buffer and allocate bufs array given that value.
- Rework offset cookie encoding pattern.
- Change DELETE_BUF to DELETE_BUFS because it now usable for
range of buffer to be symetrical of CREATE_BUFS.
- Add fixes tags on couple of Verisilicon related patches.
- Be smarter in Verisilicon postprocessor buffers management.
- Rebase on top of v6.4
changes in version 3:
- Use Xarray API to store allocated video buffers.
- No module parameter to limit the number of buffer per queue.
- Use Xarray inside Verisilicon driver to store postprocessor buffers
and remove VB2_MAX_FRAME limit.
- Allow Versilicon driver to change of resolution while streaming
- Various fixes the Verisilicon VP9 code to improve fluster score.
changes in version 2:
- Use a dynamic array and not a list to keep trace of allocated buffers.
Not use IDR interface because it is marked as deprecated in kernel
documentation.
- Add a module parameter to limit the number of buffer per queue.
- Add DELETE_BUF ioctl and m2m helpers.
Regards,
Benjamin
Benjamin Gaignard (53):
media: videobuf2: Rework offset 'cookie' encoding pattern
media: videobuf2: Stop spamming kernel log with all queue counter
media: videobuf2: Use vb2_buffer instead of index
media: amphion: Use vb2_get_buffer() instead of directly access to
buffers array
media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access
to buffers array
media: mediatek: vdec: Remove useless loop
media: sti: hva: Use vb2_get_buffer() instead of directly access to
buffers array
media: visl: Use vb2_get_buffer() instead of directly access to
buffers array
media: atomisp: Use vb2_get_buffer() instead of directly access to
buffers array
media: dvb-core: Use vb2_get_buffer() instead of directly access to
buffers array
media: videobuf2: Access vb2_queue bufs array through helper functions
media: videobuf2: Be more flexible on the number of queue stored
buffers
media: Report the maximum possible number of buffers for the queue
media: test-drivers: vivid: Increase max supported buffers for capture
queues
media: test-drivers: vicodec: Increase max supported capture queue
buffers
media: verisilicon: Refactor postprocessor to store more buffers
media: verisilicon: Store chroma and motion vectors offset
media: verisilicon: g2: Use common helpers to compute chroma and mv
offsets
media: verisilicon: vp9: Allow to change resolution while streaming
media: Remove duplicated index vs q->num_buffers check
media: core: Add helper to get queue number of buffers
media: dvb-core: Do not initialize twice queue num_buffer field
media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field
media: video-i2c: Set min_buffers_needed to 2
media: pci: cx18: Set correct value to min_buffers_needed field
media: pci: dt3155: Remove useless check
media: pci: netup_unidvb: Remove useless number of buffers check
media: pci: tw68: Stop direct calls to queue num_buffers field
media: pci: tw686x: Set min_buffers_needed to 3
media: amphion: Stop direct calls to queue num_buffers field
media: coda: Stop direct calls to queue num_buffers field
media: mediatek: vcodec: Stop direct calls to queue num_buffers field
media: nxp: Stop direct calls to queue num_buffers field
media: renesas: Set min_buffers_needed to 16
media: ti: Use queue min_buffers_needed field to set the min number of
buffers
media: verisilicon: Stop direct calls to queue num_buffers field
media: test-drivers: Stop direct calls to queue num_buffers field
media: usb: airspy: Set min_buffers_needed to 8
media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF
media: usb: hackrf: Set min_buffers_needed to 8
media: usb: usbtv: Set min_buffers_needed to 2
media: atomisp: Stop direct calls to queue num_buffers field
media: imx: Stop direct calls to queue num_buffers field
media: meson: vdec: Stop direct calls to queue num_buffers field
touchscreen: sur40: Stop direct calls to queue num_buffers field
sample: v4l: Stop direct calls to queue num_buffers field
media: cedrus: Stop direct calls to queue num_buffers field
media: core: Rework how create_buf index returned value is computed
media: core: Add bitmap manage bufs array entries
media: core: Free range of buffers
media: v4l2: Add DELETE_BUFS ioctl
media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
media: test-drivers: Use helper for DELETE_BUFS ioctl
.../userspace-api/media/v4l/user-func.rst | 1 +
.../media/v4l/vidioc-create-bufs.rst | 8 +-
.../media/v4l/vidioc-delete-bufs.rst | 80 +++
.../media/v4l/vidioc-reqbufs.rst | 2 +
drivers/input/touchscreen/sur40.c | 5 +-
.../media/common/videobuf2/videobuf2-core.c | 556 +++++++++++-------
.../media/common/videobuf2/videobuf2-v4l2.c | 121 +++-
drivers/media/dvb-core/dvb_vb2.c | 17 +-
drivers/media/dvb-frontends/rtl2832_sdr.c | 9 +-
drivers/media/i2c/video-i2c.c | 5 +-
drivers/media/pci/cx18/cx18-streams.c | 13 +-
drivers/media/pci/dt3155/dt3155.c | 2 -
.../pci/netup_unidvb/netup_unidvb_core.c | 4 +-
drivers/media/pci/tw68/tw68-video.c | 6 +-
drivers/media/pci/tw686x/tw686x-video.c | 13 +-
drivers/media/platform/amphion/vpu_dbg.c | 30 +-
drivers/media/platform/amphion/vpu_v4l2.c | 4 +-
.../media/platform/chips-media/coda-common.c | 2 +-
.../platform/mediatek/jpeg/mtk_jpeg_core.c | 7 +-
.../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 9 +-
.../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 2 +-
drivers/media/platform/nxp/imx7-media-csi.c | 7 +-
drivers/media/platform/renesas/rcar_drif.c | 8 +-
drivers/media/platform/st/sti/hva/hva-v4l2.c | 9 +-
.../media/platform/ti/am437x/am437x-vpfe.c | 7 +-
drivers/media/platform/ti/cal/cal-video.c | 5 +-
.../media/platform/ti/davinci/vpif_capture.c | 5 +-
.../media/platform/ti/davinci/vpif_display.c | 5 +-
drivers/media/platform/ti/omap/omap_vout.c | 5 +-
drivers/media/platform/verisilicon/hantro.h | 9 +-
.../media/platform/verisilicon/hantro_drv.c | 5 +-
.../media/platform/verisilicon/hantro_g2.c | 14 +
.../platform/verisilicon/hantro_g2_hevc_dec.c | 18 +-
.../platform/verisilicon/hantro_g2_vp9_dec.c | 28 +-
.../media/platform/verisilicon/hantro_hw.h | 7 +-
.../platform/verisilicon/hantro_postproc.c | 93 ++-
.../media/platform/verisilicon/hantro_v4l2.c | 27 +-
.../media/test-drivers/vicodec/vicodec-core.c | 3 +
drivers/media/test-drivers/vim2m.c | 2 +
.../media/test-drivers/vimc/vimc-capture.c | 2 +
drivers/media/test-drivers/visl/visl-dec.c | 32 +-
drivers/media/test-drivers/visl/visl-video.c | 2 +
drivers/media/test-drivers/vivid/vivid-core.c | 14 +
.../media/test-drivers/vivid/vivid-meta-cap.c | 3 -
.../media/test-drivers/vivid/vivid-meta-out.c | 5 +-
.../test-drivers/vivid/vivid-touch-cap.c | 5 +-
.../media/test-drivers/vivid/vivid-vbi-cap.c | 5 +-
.../media/test-drivers/vivid/vivid-vbi-out.c | 5 +-
.../media/test-drivers/vivid/vivid-vid-cap.c | 5 +-
.../media/test-drivers/vivid/vivid-vid-out.c | 5 +-
drivers/media/usb/airspy/airspy.c | 9 +-
drivers/media/usb/cx231xx/cx231xx-417.c | 4 +-
drivers/media/usb/cx231xx/cx231xx-video.c | 4 +-
drivers/media/usb/hackrf/hackrf.c | 9 +-
drivers/media/usb/usbtv/usbtv-video.c | 3 +-
drivers/media/v4l2-core/v4l2-dev.c | 1 +
drivers/media/v4l2-core/v4l2-ioctl.c | 21 +-
drivers/media/v4l2-core/v4l2-mem2mem.c | 20 +
.../staging/media/atomisp/pci/atomisp_ioctl.c | 4 +-
drivers/staging/media/imx/imx-media-capture.c | 7 +-
drivers/staging/media/meson/vdec/vdec.c | 13 +-
.../staging/media/sunxi/cedrus/cedrus_h264.c | 8 +-
.../staging/media/sunxi/cedrus/cedrus_h265.c | 9 +-
include/media/v4l2-ioctl.h | 4 +
include/media/v4l2-mem2mem.h | 12 +
include/media/videobuf2-core.h | 65 +-
include/media/videobuf2-v4l2.h | 13 +
include/uapi/linux/videodev2.h | 24 +-
samples/v4l/v4l2-pci-skeleton.c | 5 +-
69 files changed, 969 insertions(+), 502 deletions(-)
create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst
--
2.39.2
next reply other threads:[~2023-09-27 15:36 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-27 15:35 Benjamin Gaignard [this message]
2023-09-27 15:35 ` [PATCH v8 01/53] media: videobuf2: Rework offset 'cookie' encoding pattern Benjamin Gaignard
2023-09-30 8:52 ` Hans Verkuil
2023-09-27 15:35 ` [PATCH v8 02/53] media: videobuf2: Stop spamming kernel log with all queue counter Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 03/53] media: videobuf2: Use vb2_buffer instead of index Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 04/53] media: amphion: Use vb2_get_buffer() instead of directly access to buffers array Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 05/53] media: mediatek: jpeg: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 06/53] media: mediatek: vdec: Remove useless loop Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 07/53] media: sti: hva: Use vb2_get_buffer() instead of directly access to buffers array Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 08/53] media: visl: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 09/53] media: atomisp: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 10/53] media: dvb-core: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 11/53] media: videobuf2: Access vb2_queue bufs array through helper functions Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 12/53] media: videobuf2: Be more flexible on the number of queue stored buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 13/53] media: Report the maximum possible number of buffers for the queue Benjamin Gaignard
2023-10-02 13:37 ` Hans Verkuil
2023-10-02 13:46 ` Benjamin Gaignard
2023-10-02 13:49 ` Hans Verkuil
2023-09-27 15:35 ` [PATCH v8 14/53] media: test-drivers: vivid: Increase max supported buffers for capture queues Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 15/53] media: test-drivers: vicodec: Increase max supported capture queue buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 16/53] media: verisilicon: Refactor postprocessor to store more buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 17/53] media: verisilicon: Store chroma and motion vectors offset Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 18/53] media: verisilicon: g2: Use common helpers to compute chroma and mv offsets Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 19/53] media: verisilicon: vp9: Allow to change resolution while streaming Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 20/53] media: Remove duplicated index vs q->num_buffers check Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 21/53] media: core: Add helper to get queue number of buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 22/53] media: dvb-core: Do not initialize twice queue num_buffer field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 23/53] media: dvb-frontends: rtl2832_srd: Use queue min_buffers_needed field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 24/53] media: video-i2c: Set min_buffers_needed to 2 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 25/53] media: pci: cx18: Set correct value to min_buffers_needed field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 26/53] media: pci: dt3155: Remove useless check Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 27/53] media: pci: netup_unidvb: Remove useless number of buffers check Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 28/53] media: pci: tw68: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 29/53] media: pci: tw686x: Set min_buffers_needed to 3 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 30/53] media: amphion: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 31/53] media: coda: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 32/53] media: mediatek: vcodec: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 33/53] media: nxp: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 34/53] media: renesas: Set min_buffers_needed to 16 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 35/53] media: ti: Use queue min_buffers_needed field to set the min number of buffers Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 36/53] media: verisilicon: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 37/53] media: test-drivers: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 38/53] media: usb: airspy: Set min_buffers_needed to 8 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 39/53] media: usb: cx231xx: Set min_buffers_needed to CX231XX_MIN_BUF Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 40/53] media: usb: hackrf: Set min_buffers_needed to 8 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 41/53] media: usb: usbtv: Set min_buffers_needed to 2 Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 42/53] media: atomisp: Stop direct calls to queue num_buffers field Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 43/53] media: imx: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 44/53] media: meson: vdec: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 45/53] touchscreen: sur40: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 46/53] sample: v4l: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 47/53] media: cedrus: " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 48/53] media: core: Rework how create_buf index returned value is computed Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 49/53] media: core: Add bitmap manage bufs array entries Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 50/53] media: core: Free range of buffers Benjamin Gaignard
2023-09-30 5:09 ` kernel test robot
2023-09-27 15:35 ` [PATCH v8 51/53] media: v4l2: Add DELETE_BUFS ioctl Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 52/53] media: v4l2: Add mem2mem helpers for " Benjamin Gaignard
2023-09-27 15:35 ` [PATCH v8 53/53] media: test-drivers: Use helper " Benjamin Gaignard
2023-09-28 13:04 ` [PATCH v8 00/53] Add DELETE_BUF ioctl Hans Verkuil
2023-09-28 13:16 ` Benjamin Gaignard
2023-09-29 11:44 ` Benjamin Gaignard
2023-09-29 13:17 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230927153558.159278-1-benjamin.gaignard@collabora.com \
--to=benjamin.gaignard@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=ming.qian@nxp.com \
--cc=nicolas.dufresne@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox