[PATCH AUTOSEL 6.6 009/104] ARM: dts: qcom: strip prefix from PMIC files

[PATCH AUTOSEL 6.6 009/104] ARM: dts: qcom: strip prefix from PMIC files

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 455a4c46e023ab84263eae0fc7acca9a5ee8b7ac ]

As the vendor DTS files were moved to per-vendor subdirs, there no need
to use common prefixes. Drop the `qcom-' prefix from PMIC dtsi file.
This makes 32-bit qcom/ dts files closer to arm64 ones.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom/{qcom-pm8226.dtsi => pm8226.dtsi}      | 0
 arch/arm/boot/dts/qcom/{qcom-pm8841.dtsi => pm8841.dtsi}      | 0
 arch/arm/boot/dts/qcom/{qcom-pm8941.dtsi => pm8941.dtsi}      | 0
 arch/arm/boot/dts/qcom/{qcom-pma8084.dtsi => pma8084.dtsi}    | 0
 arch/arm/boot/dts/qcom/{qcom-pmx55.dtsi => pmx55.dtsi}        | 0
 arch/arm/boot/dts/qcom/{qcom-pmx65.dtsi => pmx65.dtsi}        | 0
 arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts          | 2 +-
 arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts       | 2 +-
 arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts              | 2 +-
 arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts  | 2 +-
 arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts           | 4 ++--
 arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts               | 2 +-
 arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts                   | 2 +-
 arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 4 ++--
 arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi    | 4 ++--
 arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts      | 4 ++--
 arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts      | 4 ++--
 arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts       | 2 +-
 .../dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts   | 4 ++--
 arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts                     | 2 +-
 arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts                     | 2 +-
 arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts         | 2 +-
 arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts                     | 2 +-
 23 files changed, 23 insertions(+), 23 deletions(-)
 rename arch/arm/boot/dts/qcom/{qcom-pm8226.dtsi => pm8226.dtsi} (100%)
 rename arch/arm/boot/dts/qcom/{qcom-pm8841.dtsi => pm8841.dtsi} (100%)
 rename arch/arm/boot/dts/qcom/{qcom-pm8941.dtsi => pm8941.dtsi} (100%)
 rename arch/arm/boot/dts/qcom/{qcom-pma8084.dtsi => pma8084.dtsi} (100%)
 rename arch/arm/boot/dts/qcom/{qcom-pmx55.dtsi => pmx55.dtsi} (100%)
 rename arch/arm/boot/dts/qcom/{qcom-pmx65.dtsi => pmx65.dtsi} (100%)

diff --git a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8226.dtsi
rename to arch/arm/boot/dts/qcom/pm8226.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom/pm8841.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8841.dtsi
rename to arch/arm/boot/dts/qcom/pm8841.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pm8941.dtsi
rename to arch/arm/boot/dts/qcom/pm8941.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pma8084.dtsi
rename to arch/arm/boot/dts/qcom/pma8084.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom/pmx55.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx55.dtsi
rename to arch/arm/boot/dts/qcom/pmx55.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom/pmx65.dtsi
similarity index 100%
rename from arch/arm/boot/dts/qcom/qcom-pmx65.dtsi
rename to arch/arm/boot/dts/qcom/pmx65.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8d2a97..a39f5a161b03 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640efe55..59b218042d32 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 #include <dt-bindings/input/ti-drv260x.h>
 
 /delete-node/ &adsp_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index b887e5361ec3..feb78afef3a6 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index f516e0426bb9..cffc069712b2 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 /delete-node/ &smem_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 6d1b2439ae3a..950fa652f985 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 
 /delete-node/ &mpss_region;
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
index 116e59a3b76d..1df24c922be9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
index c6b6680248a6..d4e6aee034af 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfddeae69..da99f770d4f5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f9094e53..23ae474698aa 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b75dad..6c4153689b39 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e1d95d..c0ca264d8140 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c86591ee2..325feb89b343 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/leds/common.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1409f7..0798cce3dbea 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
index 7e97ad5803d8..247069361909 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 51058b065279..082f7ed1a01f 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e70692..e336a15b45c4 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index fcf1c51c5e7a..b87c5434cc29 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
 #include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
-- 
2.43.0

[PATCH AUTOSEL 6.6 010/104] ARM: dts: qcom: apq8064: fix PMIC node labels

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit eba2158528b1882055b7fe2b7647820516178f06 ]

Change PM8921 node labels to start with pm8921_ prefix, following other
Qualcomm PMIC device nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 516f0d2495e2..eb12e58911b2 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -292,13 +292,13 @@ scm {
 	 */
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
+		io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
 	};
 
 	soc: soc {
@@ -686,7 +686,7 @@ ssbi@500000 {
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic {
+			pm8921: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <74 8>;
@@ -721,7 +721,7 @@ pm8921_mpps: mpps@50 {
 
 				rtc@11d {
 					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8921>;
 					interrupts = <39 1>;
 					reg = <0x11d>;
 					allow-set-time;
@@ -730,16 +730,16 @@ rtc@11d {
 				pwrkey@1c {
 					compatible = "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8921>;
 					interrupts = <50 1>, <51 1>;
 					debounce = <15625>;
 					pull-up;
 				};
 
-				xoadc: xoadc@197 {
+				pm8921_xoadc: xoadc@197 {
 					compatible = "qcom,pm8921-adc";
 					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
+					interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
 					#address-cells = <2>;
 					#size-cells = <0>;
 					#io-channel-cells = <2>;
-- 
2.43.0

[PATCH AUTOSEL 6.6 011/104] ARM: dts: qcom: mdm9615: fix PMIC node labels

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 0e4688cd4ee6efbeae2b31f75e16961fd7f72735 ]

Change PM8018 node labels to start with pm8018_ prefix, following other
Qualcomm PMIC device nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-10-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi |  2 +-
 arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi        | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003dac25..dac3aa793f71 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -76,7 +76,7 @@ reset-out-pins {
 	};
 };
 
-&pmicgpio {
+&pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index 63e21aa23642..c0a60bae703b 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -261,7 +261,7 @@ qcom,ssbi@500000 {
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic {
+			pm8018: pmic {
 				compatible = "qcom,pm8018", "qcom,pm8921";
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
@@ -272,38 +272,38 @@ pmicintc: pmic {
 				pwrkey@1c {
 					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8018>;
 					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
 						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
 					pull-up;
 				};
 
-				pmicmpp: mpps@50 {
+				pm8018_mpps: mpps@50 {
 					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
+					gpio-ranges = <&pm8018_mpps 0 0 6>;
 				};
 
 				rtc@11d {
 					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8018>;
 					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
 				};
 
-				pmicgpio: gpio@150 {
+				pm8018_gpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
+					gpio-ranges = <&pm8018_gpio 0 0 6>;
 					#gpio-cells = <2>;
 				};
 			};
-- 
2.43.0

[PATCH AUTOSEL 6.6 012/104] ARM: dts: qcom: msm8660: fix PMIC node labels

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit c6d86aa8a12194d1c9c2f9108910a46c8a3ddc90 ]

Change PM8058 node labels to start with pm8058_ prefix, following other
Qualcomm PMIC device nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-11-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/qcom/qcom-apq8060-dragonboard.dts   |  4 ++--
 arch/arm/boot/dts/qcom/qcom-msm8660.dtsi         | 16 ++++++++--------
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index db4c791b2e2f..48fd1a1feea3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -72,7 +72,7 @@ cm3605 {
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -945,7 +945,7 @@ irq-pins {
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..9217ced108c4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -80,13 +80,13 @@ sleep-clk {
 	 */
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
 	};
 
 	soc: soc {
@@ -390,7 +390,7 @@ pm8058_keypad: keypad@148 {
 					row-hold = <91500>;
 				};
 
-				xoadc: xoadc@197 {
+				pm8058_xoadc: xoadc@197 {
 					compatible = "qcom,pm8058-adc";
 					reg = <0x197>;
 					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-- 
2.43.0

[PATCH AUTOSEL 6.6 013/104] ARM: dts: qcom: msm8960: fix PMIC node labels

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit a10a09f34eb80b83ca7275e23bf982dae2aa7632 ]

Change PM8921 node labels to start with pm8921_ prefix, following other
Qualcomm PMIC device nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-12-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index d13080fcbeea..9099b858a76f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -264,7 +264,7 @@ ssbi@500000 {
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic {
+			pm8921: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&msmgpio>;
 				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
@@ -276,7 +276,7 @@ pmicintc: pmic {
 				pwrkey@1c {
 					compatible = "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8921>;
 					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
 						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
@@ -286,7 +286,7 @@ pwrkey@1c {
 				keypad@148 {
 					compatible = "qcom,pm8921-keypad";
 					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8921>;
 					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
 						     <75 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15>;
@@ -296,7 +296,7 @@ keypad@148 {
 
 				rtc@11d {
 					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
+					interrupt-parent = <&pm8921>;
 					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
-- 
2.43.0

[PATCH AUTOSEL 6.6 044/104] arm64: dts: qcom: sm8550: fix soundwire controllers node name

[Sasha Levin]

From: Neil Armstrong <neil.armstrong@linaro.org>

[ Upstream commit 07c88da81caf0e72c3690b689d30f0d325cfeff4 ]

Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8550-mtp.dtb: soundwire-controller@6ab0000: $nodename:0: 'soundwire-controller@6ab0000' does not match '^soundwire(@.*)?$'
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8550-upstream-soundwire-bindings-fix-v1-1-4ded91c805a1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index d115960bdeec..1f383944df11 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2034,7 +2034,7 @@ lpass_wsa2macro: codec@6aa0000 {
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2080,7 +2080,7 @@ lpass_rxmacro: codec@6ac0000 {
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2145,7 +2145,7 @@ lpass_wsamacro: codec@6b00000 {
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2172,7 +2172,7 @@ swr0: soundwire-controller@6b10000 {
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.43.0

[PATCH AUTOSEL 6.6 045/104] arm64: dts: qcom: sm8450: fix soundwire controllers node name

[Sasha Levin]

From: Neil Armstrong <neil.armstrong@linaro.org>

[ Upstream commit 11fcb81373de52eeb1d3ff135a8d24a4b18978d3 ]

Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: soundwire-controller@31f0000: $nodename:0: 'soundwire-controller@31f0000' does not match '^soundwire(@.*)?$'
        from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8450-upstream-soundwire-bindings-fix-v1-1-41d4844a5a7d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 2a60cf8bd891..cb4b38cfe21a 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2176,7 +2176,7 @@ wsa2macro: codec@31e0000 {
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2224,7 +2224,7 @@ rxmacro: codec@3200000 {
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2291,7 +2291,7 @@ wsamacro: codec@3240000 {
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2318,7 +2318,7 @@ swr0: soundwire-controller@3250000 {
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.43.0

[PATCH AUTOSEL 6.6 046/104] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type

[Sasha Levin]

From: Nia Espera <nespera@igalia.com>

[ Upstream commit 54ee322f845c7f25fbf6e43e11147b6cae8eff56 ]

In a similar vein to
https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
the remote processors on sm8350 fail to initialize with the 'correct'
(i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.

Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-4-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index a94e069da83d..3b70c485b4fd 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2020,7 +2020,7 @@ mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2062,7 +2062,7 @@ slpi: remoteproc@5c00000 {
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3206,7 +3206,7 @@ adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3511,7 +3511,7 @@ cdsp: remoteproc@98900000 {
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
-- 
2.43.0

[PATCH AUTOSEL 6.6 082/104] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property

[Sasha Levin]

From: Mao Jinlong <quic_jinlmao@quicinc.com>

[ Upstream commit 9a6fc510a6a3ec150cb7450aec1e5f257e6fc77b ]

Add the inport of funnel@3023000 to fix 'in-ports' is a required property
warning.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-3-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c8e0986425ab..4d87cba47c76 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -443,6 +443,19 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -2643,6 +2656,14 @@ funnel@3023000 {
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
-- 
2.43.0

[PATCH AUTOSEL 6.6 083/104] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property

[Sasha Levin]

From: Mao Jinlong <quic_jinlmao@quicinc.com>

[ Upstream commit ae5ee3562a2519214b12228545e88a203dd68bbd ]

out-ports is a required property for coresight ETM. Add out-ports for
ETM nodes to fix the warning.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-4-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 32 +++++++++++++++++----------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f180047cacb0..f91c58c844af 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2034,9 +2034,11 @@ etm5: etm@7c40000 {
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2051,9 +2053,11 @@ etm6: etm@7d40000 {
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2068,9 +2072,11 @@ etm7: etm@7e40000 {
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2085,9 +2091,11 @@ etm8: etm@7f40000 {
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
-- 
2.43.0

[PATCH AUTOSEL 6.6 084/104] arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports

[Sasha Levin]

From: Mao Jinlong <quic_jinlmao@quicinc.com>

[ Upstream commit bdb6339fd46b8702ea7411b0b414587b86a40562 ]

When a node is only one in port or one out port, address-cells and
size-cells are not required in in-ports and out-ports. And the number
and reg of the port need to be removed.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-5-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi |  5 +----
 arch/arm64/boot/dts/qcom/sm8150.dtsi |  5 +----
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 24 ++++--------------------
 3 files changed, 6 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 055ca80c0075..5af7f52d8a8d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3555,11 +3555,8 @@ etf_out: endpoint {
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 19c6003dca15..513dcebd6ed4 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2973,11 +2973,8 @@ replicator1_out: endpoint {
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a4e58ad731c3..35998bf23b60 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2830,11 +2830,8 @@ tpda@6004000 {
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -2877,11 +2874,7 @@ funnel_qatb_out_funnel_in0: endpoint {
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3090,11 +3083,8 @@ etf_out: endpoint {
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3178,8 +3168,6 @@ funnel@6c2d000 {
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3445,11 +3433,7 @@ funnel_apss_merg_out_funnel_in1: endpoint {
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
-- 
2.43.0