* [PATCH AUTOSEL 6.7 21/24] arm: dts: Fix dtc interrupt_map warnings
[not found] <20240229203729.2860356-1-sashal@kernel.org>
@ 2024-02-29 20:37 ` Sasha Levin
2024-02-29 20:37 ` [PATCH AUTOSEL 6.7 22/24] arm64: dts: qcom: Fix interrupt-map cell sizes Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2024-02-29 20:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Rob Herring, Linus Walleij, Arnd Bergmann, Sasha Levin, linusw,
kaloz, robh+dt, krzysztof.kozlowski+dt, conor+dt, andersson,
konrad.dybcio, linux-arm-kernel, devicetree, linux-arm-msm
From: Rob Herring <robh@kernel.org>
[ Upstream commit f02b0f0dc26fbb77fe47b6e47cc5c211f0432c37 ]
The dtc interrupt_map warning is off because its dependency,
interrupt_provider, is off by default. Fix all the warnings so it can be
enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-4-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts | 2 ++
.../boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts | 2 ++
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 8 ++++----
3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6afd13ab..6d5e69035f94d 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@ pci@c0000000 {
* We have slots (IDSEL) 1 and 2 with one assigned IRQ
* each handling all IRQs.
*/
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 1 */
<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169bacf8c..5f4c849915db7 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@ pci@c0000000 {
* The slots have Ethernet, Ethernet, NEC and MPCI.
* The IDSELs are 11, 12, 13, 14.
*/
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 11 - Ethernet A */
<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index a976370264fcf..fb6764b2dcde8 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -345,10 +345,10 @@ pcie_rc: pcie@1c00000 {
"msi8";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_PIPE_CLK>,
<&gcc GCC_PCIE_AUX_CLK>,
--
2.43.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH AUTOSEL 6.7 22/24] arm64: dts: qcom: Fix interrupt-map cell sizes
[not found] <20240229203729.2860356-1-sashal@kernel.org>
2024-02-29 20:37 ` [PATCH AUTOSEL 6.7 21/24] arm: dts: Fix dtc interrupt_map warnings Sasha Levin
@ 2024-02-29 20:37 ` Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2024-02-29 20:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Rob Herring, Arnd Bergmann, Sasha Levin, andersson, konrad.dybcio,
robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm,
devicetree
From: Rob Herring <robh@kernel.org>
[ Upstream commit 704dccec0d490f2ad06f3f16ebed254d81906c3a ]
The PCI node interrupt-map properties have the wrong size as #address-cells
in the interrupt parent are not accounted for.
The dtc interrupt_map check catches this, but the warning is off because
its dependency, interrupt_provider, is off by default.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-5-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 8 ++++----
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++--------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 0b1330b521df4..cf4e501c84bcc 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -759,10 +759,10 @@ pcie0: pci@20000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e5665..b33145b756ebe 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -806,13 +806,13 @@ pcie1: pci@10000000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142
+ interrupt-map = <0 0 0 1 &intc 0 0 142
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143
+ <0 0 0 2 &intc 0 0 143
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144
+ <0 0 0 3 &intc 0 0 144
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145
+ <0 0 0 4 &intc 0 0 145
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -868,13 +868,13 @@ pcie0: pci@20000000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
+ interrupt-map = <0 0 0 1 &intc 0 0 75
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78
+ <0 0 0 2 &intc 0 0 78
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79
+ <0 0 0 3 &intc 0 0 79
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83
+ <0 0 0 4 &intc 0 0 83
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
--
2.43.0
^ permalink raw reply related [flat|nested] 2+ messages in thread