* [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support
[not found] <20240329124605.3091273-1-sashal@kernel.org>
@ 2024-03-29 12:44 ` Sasha Levin
2024-03-29 13:16 ` Konrad Dybcio
2024-03-29 12:44 ` [PATCH AUTOSEL 6.1 05/52] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY Sasha Levin
1 sibling, 1 reply; 4+ messages in thread
From: Sasha Levin @ 2024-03-29 12:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dmitry Baryshkov, Konrad Dybcio, Bjorn Andersson, Sasha Levin,
robh, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit bb5009a24ec3f2f2ec1e2ed7b8a5dcde9a9e28d9 ]
Define USB3 QMP PHY presend on the SDM630 / SDM660 platforms. Enable it by
default in the USB3 host, but (for compatibility), force USB 2.0 mode
for all defined boards. The boards should opt-in to enable USB 3.0
support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-3-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/qcom/sda660-inforce-ifc6560.dts | 6 ++++
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 6 ++++
arch/arm64/boot/dts/qcom/sdm630.dtsi | 36 ++++++++++++++-----
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 6 ++++
4 files changed, 46 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 28050bc5f0813..f824036871cc1 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -452,10 +452,16 @@ &usb2_dwc3 {
};
&usb3 {
+ qcom,select-utmi-as-pipe-clk;
+
status = "okay";
};
&usb3_dwc3 {
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy0>;
+ phy-names = "usb2-phy";
+
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 09c07800793a0..dd1d7e738c8da 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -650,10 +650,16 @@ cam_vdig_default: cam-vdig-default {
};
&usb3 {
+ qcom,select-utmi-as-pipe-clk;
+
status = "okay";
};
&usb3_dwc3 {
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy0>;
+ phy-names = "usb2-phy";
+
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 2430549265d3f..1d18c85c5c5b0 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1233,7 +1233,6 @@ usb3: usb@a8f8800 {
interrupt-names = "hs_phy_irq", "ss_phy_irq";
power-domains = <&gcc USB_30_GDSC>;
- qcom,select-utmi-as-pipe-clk;
resets = <&gcc GCC_USB_30_BCR>;
@@ -1244,17 +1243,38 @@ usb3_dwc3: usb@a800000 {
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- /*
- * SDM630 technically supports USB3 but I
- * haven't seen any devices making use of it.
- */
- maximum-speed = "high-speed";
- phys = <&qusb2phy0>;
- phy-names = "usb2-phy";
+ phys = <&qusb2phy0>, <&usb3_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
snps,hird-threshold = /bits/ 8 <0>;
};
};
+ usb3_qmpphy: phy@c010000 {
+ compatible = "qcom,sdm660-qmp-usb3-phy";
+ reg = <0x0c010000 0x1000>;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+ status = "disabled";
+ };
+
qusb2phy0: phy@c012000 {
compatible = "qcom,sdm660-qusb2-phy";
reg = <0x0c012000 0x180>;
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index a3559f6e34a5e..308f9786a648e 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -411,10 +411,16 @@ &tlmm {
};
&usb3 {
+ qcom,select-utmi-as-pipe-clk;
+
status = "okay";
};
&usb3_dwc3 {
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy0>;
+ phy-names = "usb2-phy";
+
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
--
2.43.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 6.1 05/52] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY
[not found] <20240329124605.3091273-1-sashal@kernel.org>
2024-03-29 12:44 ` [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support Sasha Levin
@ 2024-03-29 12:44 ` Sasha Levin
1 sibling, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2024-03-29 12:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Dmitry Baryshkov, Bjorn Andersson, Sasha Levin, konrad.dybcio,
robh, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 319a12e7c399df4316f54f6cc83cd6cdffb4ec4a ]
The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index f824036871cc1..2128a90e7ef97 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -452,16 +452,15 @@ &usb2_dwc3 {
};
&usb3 {
- qcom,select-utmi-as-pipe-clk;
-
status = "okay";
};
&usb3_dwc3 {
- maximum-speed = "high-speed";
- phys = <&qusb2phy0>;
- phy-names = "usb2-phy";
-
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};
+
+&usb3_qmpphy {
+ vdda-phy-supply = <&vreg_l1b_0p925>;
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 4+ messages in thread