From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Slark Xiao <slark_xiao@163.com>
Cc: loic.poulain@linaro.org, quic_qianyu@quicinc.com,
mhi@lists.linux.dev, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/2] bus: mhi: host: Import link_id item
Date: Wed, 12 Jun 2024 10:03:14 +0530 [thread overview]
Message-ID: <20240612043314.GB2645@thinkpad> (raw)
In-Reply-To: <20240607100114.452979-1-slark_xiao@163.com>
On Fri, Jun 07, 2024 at 06:01:14PM +0800, Slark Xiao wrote:
> For SDX72 MBIM mode, it starts data mux id from 112 instead of 0.
> This would lead to device can't ping outside successfully.
> Also MBIM side would report "bad packet session (112)".
> So we add a link id default value for SDX72.
>
link_id is WWAN specific. But what you are passing is essentially 'mux_id', so
just use the actual name.
> Signed-off-by: Slark Xiao <slark_xiao@163.com>
> ---
> drivers/bus/mhi/host/pci_generic.c | 3 +++
> include/linux/mhi.h | 1 +
> 2 files changed, 4 insertions(+)
>
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 0b483c7c76a1..1f9de2730766 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -53,6 +53,7 @@ struct mhi_pci_dev_info {
> unsigned int dma_data_width;
> unsigned int mru_default;
> bool sideband_wake;
> + unsigned int link_default;
> };
>
> #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> @@ -469,6 +470,7 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx72_info = {
> .dma_data_width = 32,
> .mru_default = 32768,
> .sideband_wake = false,
> + .link_default = 112,
Just use 'mux_id' here also.
> };
>
> static const struct mhi_channel_config mhi_mv3x_channels[] = {
> @@ -1035,6 +1037,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> mhi_cntrl->runtime_get = mhi_pci_runtime_get;
> mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> mhi_cntrl->mru = info->mru_default;
> + mhi_cntrl->link_id = info->link_default;
>
> if (info->edl_trigger)
> mhi_cntrl->edl_trigger = mhi_pci_generic_edl_trigger;
> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> index b573f15762f8..4da10b99c96e 100644
> --- a/include/linux/mhi.h
> +++ b/include/linux/mhi.h
> @@ -445,6 +445,7 @@ struct mhi_controller {
> bool wake_set;
> unsigned long irq_flags;
> u32 mru;
> + u32 link_id;
Add kdoc comment.
- Mani
--
மணிவண்ணன் சதாசிவம்
prev parent reply other threads:[~2024-06-12 4:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-07 10:01 [PATCH v1 1/2] bus: mhi: host: Import link_id item Slark Xiao
2024-06-07 15:01 ` Jeffrey Hugo
2024-06-11 1:24 ` Slark Xiao
2024-06-11 1:45 ` Slark Xiao
2024-06-08 6:29 ` kernel test robot
2024-06-12 4:33 ` Manivannan Sadhasivam [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240612043314.GB2645@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mhi@lists.linux.dev \
--cc=quic_qianyu@quicinc.com \
--cc=slark_xiao@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox