[PATCH AUTOSEL 6.9 01/22] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs

[PATCH AUTOSEL 6.9 01/22] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs

[Sasha Levin]

From: Gabor Juhos <j4g8y7@gmail.com>

[ Upstream commit 2ba8425678af422da37b6c9b50e9ce66f0f55cae ]

Since the CONFIG_CTL register is only 32 bits wide in the Stromer
and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the
IPQ5018 and IPQ5332 configurations are not used so remove those.

No functional changes.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240509-stromer-config-ctl-v1-1-6034e17b28d5@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/apss-ipq-pll.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index d7ab5bd5d4b41..e12bb9abf6b6a 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -100,7 +100,6 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = {
 static const struct alpha_pll_config ipq5018_pll_config = {
 	.l = 0x2a,
 	.config_ctl_val = 0x4001075b,
-	.config_ctl_hi_val = 0x304,
 	.main_output_mask = BIT(0),
 	.aux_output_mask = BIT(1),
 	.early_output_mask = BIT(3),
@@ -114,7 +113,6 @@ static const struct alpha_pll_config ipq5018_pll_config = {
 static const struct alpha_pll_config ipq5332_pll_config = {
 	.l = 0x2d,
 	.config_ctl_val = 0x4001075b,
-	.config_ctl_hi_val = 0x304,
 	.main_output_mask = BIT(0),
 	.aux_output_mask = BIT(1),
 	.early_output_mask = BIT(3),
-- 
2.43.0