[PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs

Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed

* [PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs
@ 2024-09-20 15:58 Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation Bibek Kumar Patro
                   ` (4 more replies)
  0 siblings, 5 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 15:58 UTC (permalink / raw)
  To: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, dmitry.baryshkov
  Cc: iommu, linux-arm-msm, linux-arm-kernel, linux-kernel,
	quic_bibekkum

This patch series consist of six parts and covers the following:

1. Re-enable context caching for Qualcomm SoCs to retain prefetcher
   settings during reset and runtime suspend.

2. Remove cfg inside qcom_smmu structure and replace it with single
   pointer to qcom_smmu_match_data avoiding replication of multiple
   members from same.

3. Add support for ACTLR PRR bit setup via adreno-smmu-priv interface.

4. Introduce intital set of driver changes to implement ACTLR register
   for custom prefetcher settings in Qualcomm SoCs.

5. Add ACTLR data and support for qcom_smmu_500.

Changes in v15 from v14:
 - As discussed with Robin and Dmitry modify the actlr table and logic to use
   compatible string instead of sid, mask for device matching which is
   similar to qcom_smmu_client_of_match mechanism.
 - Expand the comment in qcom_smmu500_reset to document reason why CPRE bit is re-enabled again
   after arm_mmu500_reset resets the bit.
 - Rearrange the series in order to keep prefetch setting patches in the end.
 Link to v14:
 https://lore.kernel.org/all/20240816174259.2056829-1-quic_bibekkum@quicinc.com/

Changes in v14 from v13:
 Patch 6/6:
 - As discussed incorprate changes to carry out PRR implementation only for
   targets based on MMU-500 by using compat string based SMMU version detection.
 - Split the set_actlr interface into two separate interface namely set_prr_bit
   and set_prr_addr to set the prr enable bit and prr page address resepectively.
 Patch 3/6:
  - Fix a bug in gfx actlr_config which is uncovered while testing the gfx actlr setting in sc7280
    during PRR experiment which prevented clients on certain sids of gfx smmmu to be skipped during
    setting up of the ACTLR values : Fix involves swapping the arguments passed in smr_is_subset to make
     device smr <from devicetree> a subset of actlr_config table entries < defined in the driver>.
 Patch 4/6, 5/6:
  - Sort the actlr table values in increasing order of the SIDs.
 Link to v13:
 https://lore.kernel.org/all/20240628140435.1652374-1-quic_bibekkum@quicinc.com/

Changes in v13 from v12:
 - Fix the compilation issues reported by kernel test robot [1].
 [1] https://lore.kernel.org/all/202406281241.xEX0TWjt-lkp@intel.com/#t
 Link to v12:
 https://lore.kernel.org/all/20240626143020.3682243-1-quic_bibekkum@quicinc.com/

Changes in v12 from v11:
 Changes to incorporate suggestion from Rob:
 - Fix the set and reset logic for prr bit as pointed out in v11-6/6.
 - Rename set_actlr_bit function name to set_prr.
 - Add extension for PRR name as Partially-Resident-Region in comments
   for set_prr function.
 - Add few missing sids for sc7280 in patch-5/6.
 Link to v11:
 https://lore.kernel.org/all/20240605121713.3596499-1-quic_bibekkum@quicinc.com/

Changes in v11 from v10:
 - Include a new patch 6/6 to add support for ACTLR PRR bit
   through adreno-smmu-priv interface as suggested by Rob and Dmitry.
 Link to v10:
 https://lore.kernel.org/all/20240524131800.2288259-1-quic_bibekkum@quicinc.com/

Changes in v10 from v9:
 - Added reviewed-by tags 1/5,2/5,3/5.
 Changes incorporated:
 - Remove redundant PRR bit setting from gfx actlr table(patch 4/5,5/5)
   as this bit needs special handling in the gfx driver along with
   the associated register settings.
 Link to discussion on PRR bit:
 https://lore.kernel.org/all/f2222714-1e00-424e-946d-c314d55541b8@quicinc.com/
 Link to v9:
 https://lore.kernel.org/all/20240123144543.9405-1-quic_bibekkum@quicinc.com/

Changes in v9 from v8:
 Changes to incorporate suggestions from Konrad as follows:
 - Re-wrap struct members of actlr_variant in patch 4/5,5/5
   in a cleaner way.
 - Move actlr_config members to the header.
 Link to v8:
 https://lore.kernel.org/all/20240116150411.23876-1-quic_bibekkum@quicinc.com/

Changes in v8 from v7:
 - Added reviewed-by tags on patch 1/5, 2/5.
 Changes to incorporate suggestions from Pavan and Konrad:
 - Remove non necessary extra lines.
 - Use num_smmu and num_actlrcfg to store the array size and use the
   same to traverse the table and save on sentinel space along with
   indentation levels.
 - Refactor blocks containing qcom_smmu_set_actlr to remove block
   repetition in patch 3/5.
 - Change copyright year from 2023 to 2022-2023 in patch 3/5.
 - Modify qcom_smmu_match_data.actlrvar and actlr_variant.actlrcfg to
   const pointer to a const resource.
 - use C99 designated initializers and put the address first.
 Link to v7:
 https://lore.kernel.org/all/20240109114220.30243-1-quic_bibekkum@quicinc.com/

Changes in v7 from v6:
 Changes to incorporate suggestions from Dmitry as follows:
 - Use io_start address instead of compatible string to identify the
   correct instance by comparing with smmu start address and check for
   which smmu the corresponding actlr table is to be picked.
Link to v6:
https://lore.kernel.org/all/20231220133808.5654-1-quic_bibekkum@quicinc.com/

Changes in v6 from v5:
 - Remove extra Suggested-by tags.
 - Add return check for arm_mmu500_reset in 1/5 as discussed.
Link to v5:
https://lore.kernel.org/all/20231219135947.1623-1-quic_bibekkum@quicinc.com/

Changes in v5 from v4:
 New addition:
 - Modify copyright year in arm-smmu-qcom.h to 2023 from 2022.
 Changes to incorporate suggestions from Dmitry as follows:
 - Modify the defines for prefetch in (foo << bar) format
   as suggested.(FIELD_PREP could not be used in defines
   is not inside any block/function)
 Changes to incorporate suggestions from Konrad as follows:
 - Shift context caching enablement patch as 1/5 instead of 5/5 to
   be picked up as independent patch.
 - Fix the codestyle to orient variables in reverse xmas tree format
   for patch 1/5.
 - Fix variable name in patch 1/5 as suggested.
 Link to v4:
https://lore.kernel.org/all/20231215101827.30549-1-quic_bibekkum@quicinc.com/

Changes in v4 from v3:
 New addition:
 - Remove actlrcfg_size and use NULL end element instead to traverse
   the actlr table, as this would be a cleaner approach by removing
   redundancy of actlrcfg_size.
 - Renaming of actlr set function to arm_smmu_qcom based proprietary
   convention.
 - break from loop once sid is found and ACTLR value is initialized
   in qcom_smmu_set_actlr.
 - Modify the GFX prefetch value separating into 2 sensible defines.
 - Modify comments for prefetch defines as per SMMU-500 TRM.
 Changes to incorporate suggestions from Konrad as follows:
 - Use Reverse-Christmas-tree sorting wherever applicable.
 - Pass arguments directly to arm_smmu_set_actlr instead of creating
   duplicate variables.
 - Use array indexing instead of direct pointer addressed by new
   addition of eliminating actlrcfg_size.
 - Switch the HEX value's case from upper to lower case in SC7280
   actlrcfg table.
 Changes to incorporate suggestions from Dmitry as follows:
 - Separate changes not related to ACTLR support to different commit
   with patch 5/5.
 - Using pointer to struct for arguments in smr_is_subset().
 Changes to incorporate suggestions from Bjorn as follows:
 - fix the commit message for patch 2/5 to properly document the
   value space to avoid confusion.
 Fixed build issues reported by kernel test robot [1] for
 arm64-allyesconfig [2].
 [1]: https://lore.kernel.org/all/202312011750.Pwca3TWE-lkp@intel.com/
 [2]:
https://download.01.org/0day-ci/archive/20231201/202312011750.Pwca3TWE-lkp@intel.com/config
 Link to v3:
https://lore.kernel.org/all/20231127145412.3981-1-quic_bibekkum@quicinc.com/

Changes in v3 from v2:
 New addition:
 - Include patch 3/4 for adding ACTLR support and data for SC7280.
 - Add driver changes for actlr support in gpu smmu.
 - Add target wise actlr data and implementation ops for gpu smmu.
 Changes to incorporate suggestions from Robin as follows:
 - Match the ACTLR values with individual corresponding SID instead
   of assuming that any SMR will be programmed to match a superset of
   the data.
 - Instead of replicating each elements from qcom_smmu_match_data to
   qcom_smmu structre during smmu device creation, replace the
   replicated members with qcom_smmu_match_data structure inside
   qcom_smmu structre and handle the dereference in places that
   requires them.
 Changes to incorporate suggestions from Dmitry and Konrad as follows:
 - Maintain actlr table inside a single structure instead of
   nested structure.
 - Rename prefetch defines to more appropriately describe their
   behavior.
 - Remove SM8550 specific implementation ops and roll back to default
   qcom_smmu_500_impl implementation ops.
 - Add back the removed comments which are NAK.
 - Fix commit description for patch 4/4.
 Link to v2:
https://lore.kernel.org/all/20231114135654.30475-1-quic_bibekkum@quicinc.com/

Changes in v2 from v1:
 - Incorporated suggestions on v1 from Dmitry,Konrad,Pratyush.
 - Added defines for ACTLR values.
 - Linked sm8550 implementation structure to corresponding
   compatible string.
 - Repackaged actlr value set implementation to separate function.
 - Fixed indentation errors.
 - Link to v1:
https://lore.kernel.org/all/20231103215124.1095-1-quic_bibekkum@quicinc.com/

Changes in v1 from RFC:
 - Incorporated suggestion form Robin on RFC
 - Moved the actlr data table into driver, instead of maintaining
   it inside soc specific DT and piggybacking on exisiting iommus
   property (iommu = <SID, MASK, ACTLR>) to set this value during
   smmu probe.
 - Link to RFC:
https://lore.kernel.org/all/a01e7e60-6ead-4a9e-ba90-22a8a6bbd03f@quicinc.com/
Bibek Kumar Patro (5):
  iommu/arm-smmu: re-enable context caching in smmu reset operation
  iommu/arm-smmu: refactor qcom_smmu structure to include single pointer
  iommu/arm-smmu: add support for PRR bit setup
  iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500

 .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c  |   2 +-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c    | 134 +++++++++++++++++-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h    |   3 +-
 drivers/iommu/arm/arm-smmu/arm-smmu.h         |   2 +
 include/linux/adreno-smmu-priv.h              |  10 +-
 5 files changed, 144 insertions(+), 7 deletions(-)

--
2.34.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v15 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  2024-09-20 15:58 [PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs Bibek Kumar Patro
@ 2024-09-20 15:58 ` Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer Bibek Kumar Patro
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 15:58 UTC (permalink / raw)
  To: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, dmitry.baryshkov
  Cc: iommu, linux-arm-msm, linux-arm-kernel, linux-kernel,
	quic_bibekkum, Konrad Dybcio

Default MMU-500 reset operation disables context caching in
prefetch buffer. It is however expected for context banks using
the ACTLR register to retain their prefetch value during reset
and runtime suspend.

Replace default MMU-500 reset operation with Qualcomm specific reset
operation which envelope the default reset operation and re-enables
context caching in prefetch buffer for Qualcomm SoCs.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 45 ++++++++++++++++++++--
 1 file changed, 42 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 087fb4f6f4d3..0cb10b354802 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -16,6 +16,16 @@

 #define QCOM_DUMMY_VAL	-1

+/*
+ * SMMU-500 TRM defines BIT(0) as CMTLB (Enable context caching in the
+ * macro TLB) and BIT(1) as CPRE (Enable context caching in the prefetch
+ * buffer). The remaining bits are implementation defined and vary across
+ * SoCs.
+ */
+
+#define CPRE			(1 << 1)
+#define CMTLB			(1 << 0)
+
 static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
 {
 	return container_of(smmu, struct qcom_smmu, smmu);
@@ -396,11 +406,40 @@ static int qcom_smmu_def_domain_type(struct device *dev)
 	return match ? IOMMU_DOMAIN_IDENTITY : 0;
 }

+static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
+{
+	int ret;
+	u32 val;
+	int i;
+
+	ret = arm_mmu500_reset(smmu);
+	if (ret)
+		return ret;
+
+	/*
+	 * arm_mmu500_reset() disables CPRE which is re-enabled here.
+	 * The errata for MMU-500 before the r2p2 revision requires CPRE to be
+	 * disabled. The arm_mmu500_reset function disables CPRE to accommodate all
+	 * RTL revisions. Since all Qualcomm SoCs are on the r2p4 revision, where
+	 * the CPRE bit can be enabled, the qcom_smmu500_reset function re-enables
+	 * the CPRE bit for the next-page prefetcher to retain the prefetch value
+	 * during reset and runtime suspend operations.
+	 */
+
+	for (i = 0; i < smmu->num_context_banks; ++i) {
+		val = arm_smmu_cb_read(smmu, i, ARM_SMMU_CB_ACTLR);
+		val |= CPRE;
+		arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_ACTLR, val);
+	}
+
+	return 0;
+}
+
 static int qcom_sdm845_smmu500_reset(struct arm_smmu_device *smmu)
 {
 	int ret;

-	arm_mmu500_reset(smmu);
+	qcom_smmu500_reset(smmu);

 	/*
 	 * To address performance degradation in non-real time clients,
@@ -427,7 +466,7 @@ static const struct arm_smmu_impl qcom_smmu_500_impl = {
 	.init_context = qcom_smmu_init_context,
 	.cfg_probe = qcom_smmu_cfg_probe,
 	.def_domain_type = qcom_smmu_def_domain_type,
-	.reset = arm_mmu500_reset,
+	.reset = qcom_smmu500_reset,
 	.write_s2cr = qcom_smmu_write_s2cr,
 	.tlb_sync = qcom_smmu_tlb_sync,
 #ifdef CONFIG_ARM_SMMU_QCOM_DEBUG
@@ -461,7 +500,7 @@ static const struct arm_smmu_impl qcom_adreno_smmu_v2_impl = {
 static const struct arm_smmu_impl qcom_adreno_smmu_500_impl = {
 	.init_context = qcom_adreno_smmu_init_context,
 	.def_domain_type = qcom_smmu_def_domain_type,
-	.reset = arm_mmu500_reset,
+	.reset = qcom_smmu500_reset,
 	.alloc_context_bank = qcom_adreno_smmu_alloc_context_bank,
 	.write_sctlr = qcom_adreno_smmu_write_sctlr,
 	.tlb_sync = qcom_smmu_tlb_sync,
--
2.34.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v15 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer
  2024-09-20 15:58 [PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation Bibek Kumar Patro
@ 2024-09-20 15:58 ` Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 3/5] iommu/arm-smmu: add support for PRR bit setup Bibek Kumar Patro
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 15:58 UTC (permalink / raw)
  To: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, dmitry.baryshkov
  Cc: iommu, linux-arm-msm, linux-arm-kernel, linux-kernel,
	quic_bibekkum

qcom_smmu_match_data is static and constant so refactor qcom_smmu
to store single pointer to qcom_smmu_match_data instead of
replicating multiple child members of the same and handle the further
dereferences in the places that want them.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c | 2 +-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c       | 2 +-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h       | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
index 548783f3f8e8..d03b2239baad 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
@@ -73,7 +73,7 @@ void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu)
 	if (__ratelimit(&rs)) {
 		dev_err(smmu->dev, "TLB sync timed out -- SMMU may be deadlocked\n");

-		cfg = qsmmu->cfg;
+		cfg = qsmmu->data->cfg;
 		if (!cfg)
 			return;

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 0cb10b354802..6e0a2a43e45a 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -534,7 +534,7 @@ static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu,
 		return ERR_PTR(-ENOMEM);

 	qsmmu->smmu.impl = impl;
-	qsmmu->cfg = data->cfg;
+	qsmmu->data = data;

 	return &qsmmu->smmu;
 }
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
index 3c134d1a6277..b55cd3e3ae48 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
@@ -8,7 +8,7 @@

 struct qcom_smmu {
 	struct arm_smmu_device smmu;
-	const struct qcom_smmu_config *cfg;
+	const struct qcom_smmu_match_data *data;
 	bool bypass_quirk;
 	u8 bypass_cbndx;
 	u32 stall_enabled;
--
2.34.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v15 3/5] iommu/arm-smmu: add support for PRR bit setup
  2024-09-20 15:58 [PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer Bibek Kumar Patro
@ 2024-09-20 15:58 ` Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings Bibek Kumar Patro
  2024-09-20 15:58 ` [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500 Bibek Kumar Patro
  4 siblings, 0 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 15:58 UTC (permalink / raw)
  To: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, dmitry.baryshkov
  Cc: iommu, linux-arm-msm, linux-arm-kernel, linux-kernel,
	quic_bibekkum

Add an adreno-smmu-priv interface for drm/msm to call
into arm-smmu-qcom and initiate the PRR bit setup or reset
sequence as per request.

This will be used by GPU to setup the PRR bit and related
configuration registers through adreno-smmu private
interface instead of directly poking the smmu hardware.

Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 37 ++++++++++++++++++++++
 drivers/iommu/arm/arm-smmu/arm-smmu.h      |  2 ++
 include/linux/adreno-smmu-priv.h           | 10 +++++-
 3 files changed, 48 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 6e0a2a43e45a..38ac9cab763b 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -25,6 +25,7 @@

 #define CPRE			(1 << 1)
 #define CMTLB			(1 << 0)
+#define GFX_ACTLR_PRR		(1 << 5)

 static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
 {
@@ -109,6 +110,40 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
 	arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
 }

+static void qcom_adreno_smmu_set_prr_bit(const void *cookie, bool set)
+{
+	struct arm_smmu_domain *smmu_domain = (void *)cookie;
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	const struct device_node *np = smmu->dev->of_node;
+	struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+	u32 reg = 0;
+
+	if (of_device_is_compatible(np, "qcom,smmu-500") &&
+			of_device_is_compatible(np, "qcom,adreno-smmu")) {
+		reg =  arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
+		reg &= ~GFX_ACTLR_PRR;
+		if (set)
+			reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
+		arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
+	}
+}
+
+static void qcom_adreno_smmu_set_prr_addr(const void *cookie, phys_addr_t page_addr)
+{
+	struct arm_smmu_domain *smmu_domain = (void *)cookie;
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	const struct device_node *np = smmu->dev->of_node;
+
+	if (of_device_is_compatible(np, "qcom,smmu-500") &&
+			of_device_is_compatible(np, "qcom,adreno-smmu")) {
+		writel_relaxed(lower_32_bits(page_addr),
+					smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);
+
+		writel_relaxed(upper_32_bits(page_addr),
+					smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);
+	}
+}
+
 #define QCOM_ADRENO_SMMU_GPU_SID 0

 static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
@@ -249,6 +284,8 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
 	priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
 	priv->set_stall = qcom_adreno_smmu_set_stall;
 	priv->resume_translation = qcom_adreno_smmu_resume_translation;
+	priv->set_prr_bit = qcom_adreno_smmu_set_prr_bit;
+	priv->set_prr_addr = qcom_adreno_smmu_set_prr_addr;

 	return 0;
 }
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index e2aeb511ae90..2dbf3243b5ad 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
 #define ARM_SMMU_SCTLR_M		BIT(0)

 #define ARM_SMMU_CB_ACTLR		0x4
+#define ARM_SMMU_GFX_PRR_CFG_LADDR	0x6008
+#define ARM_SMMU_GFX_PRR_CFG_UADDR	0x600C

 #define ARM_SMMU_CB_RESUME		0x8
 #define ARM_SMMU_RESUME_TERMINATE	BIT(0)
diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
index c637e0997f6d..03466eb16933 100644
--- a/include/linux/adreno-smmu-priv.h
+++ b/include/linux/adreno-smmu-priv.h
@@ -49,7 +49,13 @@ struct adreno_smmu_fault_info {
  *                 before set_ttbr0_cfg().  If stalling on fault is enabled,
  *                 the GPU driver must call resume_translation()
  * @resume_translation: Resume translation after a fault
- *
+ * @set_prr_bit:   Extendible interface to be used by GPU to modify the
+ *		   ACTLR register bits, currently used to configure
+ *		   Partially-Resident-Region (PRR) bit for feature's
+ *		   setup and reset sequence as requested.
+ * @set_prr_addr:  Configure the PRR_CFG_*ADDR register with the
+ *		   physical address of PRR page passed from
+ *		   GPU driver.
  *
  * The GPU driver (drm/msm) and adreno-smmu work together for controlling
  * the GPU's SMMU instance.  This is by necessity, as the GPU is directly
@@ -67,6 +73,8 @@ struct adreno_smmu_priv {
     void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
     void (*set_stall)(const void *cookie, bool enabled);
     void (*resume_translation)(const void *cookie, bool terminate);
+    void (*set_prr_bit)(const void *cookie, bool set);
+    void (*set_prr_addr)(const void *cookie, phys_addr_t page_addr);
 };

 #endif /* __ADRENO_SMMU_PRIV_H */
--
2.34.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  2024-09-20 15:58 [PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs Bibek Kumar Patro
                   ` (2 preceding siblings ...)
  2024-09-20 15:58 ` [PATCH v15 3/5] iommu/arm-smmu: add support for PRR bit setup Bibek Kumar Patro
@ 2024-09-20 15:58 ` Bibek Kumar Patro
  2024-09-20 16:20   ` Dmitry Baryshkov
  2024-09-22 19:36   ` kernel test robot
  2024-09-20 15:58 ` [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500 Bibek Kumar Patro
  4 siblings, 2 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 15:58 UTC (permalink / raw)
  To: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, dmitry.baryshkov
  Cc: iommu, linux-arm-msm, linux-arm-kernel, linux-kernel,
	quic_bibekkum

Currently in Qualcomm  SoCs the default prefetch is set to 1 which allows
the TLB to fetch just the next page table. MMU-500 features ACTLR
register which is implementation defined and is used for Qualcomm SoCs
to have a custom prefetch setting enabling TLB to prefetch the next set
of page tables accordingly allowing for faster translations.

ACTLR value is unique for each SMR (Stream matching register) and stored
in a pre-populated table. This value is set to the register during
context bank initialisation.

Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 26 ++++++++++++++++++++++
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h |  1 +
 2 files changed, 27 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 38ac9cab763b..4ac272d05843 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -252,6 +252,20 @@ static bool qcom_adreno_can_do_ttbr1(struct arm_smmu_device *smmu)
 	return true;
 }

+static void qcom_smmu_set_actlr_dev(struct device *dev, struct arm_smmu_device *smmu, int cbndx,
+		const struct of_device_id *client_match)
+{
+	const struct of_device_id *match =
+			of_match_device(client_match, dev);
+
+	if (!match) {
+		dev_notice(dev, "no ACTLR settings present\n");
+		return;
+	}
+
+	arm_smmu_cb_write(smmu, cbndx, ARM_SMMU_CB_ACTLR, (u64)match->data);
+}
+
 static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
 		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
 {
@@ -316,8 +330,20 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
 static int qcom_smmu_init_context(struct arm_smmu_domain *smmu_domain,
 		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
 {
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
+	const struct of_device_id *client_match;
+	int cbndx = smmu_domain->cfg.cbndx;
+
 	smmu_domain->cfg.flush_walk_prefer_tlbiasid = true;

+	client_match = qsmmu->data->client_match;
+
+	if (!client_match)
+		return 0;
+
+	qcom_smmu_set_actlr_dev(dev, smmu, cbndx, client_match);
+
 	return 0;
 }

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
index b55cd3e3ae48..8addd453f5f1 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
@@ -28,6 +28,7 @@ struct qcom_smmu_match_data {
 	const struct qcom_smmu_config *cfg;
 	const struct arm_smmu_impl *impl;
 	const struct arm_smmu_impl *adreno_impl;
+	const struct of_device_id * const client_match;
 };

 irqreturn_t qcom_smmu_context_fault(int irq, void *dev);
--
2.34.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  2024-09-20 15:58 ` [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings Bibek Kumar Patro
@ 2024-09-20 16:20   ` Dmitry Baryshkov
  2024-09-20 19:34     ` Bibek Kumar Patro
  2024-09-22 19:36   ` kernel test robot
  1 sibling, 1 reply; 14+ messages in thread
From: Dmitry Baryshkov @ 2024-09-20 16:20 UTC (permalink / raw)
  To: Bibek Kumar Patro
  Cc: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, iommu, linux-arm-msm,
	linux-arm-kernel, linux-kernel

On Fri, Sep 20, 2024 at 09:28:12PM GMT, Bibek Kumar Patro wrote:
> Currently in Qualcomm  SoCs the default prefetch is set to 1 which allows
> the TLB to fetch just the next page table. MMU-500 features ACTLR
> register which is implementation defined and is used for Qualcomm SoCs
> to have a custom prefetch setting enabling TLB to prefetch the next set
> of page tables accordingly allowing for faster translations.
> 
> ACTLR value is unique for each SMR (Stream matching register) and stored
> in a pre-populated table. This value is set to the register during
> context bank initialisation.
> 
> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
> ---
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 26 ++++++++++++++++++++++
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h |  1 +
>  2 files changed, 27 insertions(+)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index 38ac9cab763b..4ac272d05843 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -252,6 +252,20 @@ static bool qcom_adreno_can_do_ttbr1(struct arm_smmu_device *smmu)
>  	return true;
>  }
> 
> +static void qcom_smmu_set_actlr_dev(struct device *dev, struct arm_smmu_device *smmu, int cbndx,
> +		const struct of_device_id *client_match)
> +{
> +	const struct of_device_id *match =
> +			of_match_device(client_match, dev);
> +
> +	if (!match) {
> +		dev_notice(dev, "no ACTLR settings present\n");

dev_dbg() or even dev_vdbg(), please. We do not want to spam people with
messages about a perfectly normal behaviour.

LGTM otherwise.


> +		return;
> +	}
> +
> +	arm_smmu_cb_write(smmu, cbndx, ARM_SMMU_CB_ACTLR, (u64)match->data);
> +}
> +
>  static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
>  		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
>  {
> @@ -316,8 +330,20 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
>  static int qcom_smmu_init_context(struct arm_smmu_domain *smmu_domain,
>  		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
>  {
> +	struct arm_smmu_device *smmu = smmu_domain->smmu;
> +	struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
> +	const struct of_device_id *client_match;
> +	int cbndx = smmu_domain->cfg.cbndx;
> +
>  	smmu_domain->cfg.flush_walk_prefer_tlbiasid = true;
> 
> +	client_match = qsmmu->data->client_match;
> +
> +	if (!client_match)
> +		return 0;
> +
> +	qcom_smmu_set_actlr_dev(dev, smmu, cbndx, client_match);
> +
>  	return 0;
>  }
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
> index b55cd3e3ae48..8addd453f5f1 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
> @@ -28,6 +28,7 @@ struct qcom_smmu_match_data {
>  	const struct qcom_smmu_config *cfg;
>  	const struct arm_smmu_impl *impl;
>  	const struct arm_smmu_impl *adreno_impl;
> +	const struct of_device_id * const client_match;
>  };
> 
>  irqreturn_t qcom_smmu_context_fault(int irq, void *dev);
> --
> 2.34.1
> 

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  2024-09-20 16:20   ` Dmitry Baryshkov
@ 2024-09-20 19:34     ` Bibek Kumar Patro
  0 siblings, 0 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 19:34 UTC (permalink / raw)
  To: Dmitry Baryshkov
  Cc: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, iommu, linux-arm-msm,
	linux-arm-kernel, linux-kernel



On 9/20/2024 9:50 PM, Dmitry Baryshkov wrote:
> On Fri, Sep 20, 2024 at 09:28:12PM GMT, Bibek Kumar Patro wrote:
>> Currently in Qualcomm  SoCs the default prefetch is set to 1 which allows
>> the TLB to fetch just the next page table. MMU-500 features ACTLR
>> register which is implementation defined and is used for Qualcomm SoCs
>> to have a custom prefetch setting enabling TLB to prefetch the next set
>> of page tables accordingly allowing for faster translations.
>>
>> ACTLR value is unique for each SMR (Stream matching register) and stored
>> in a pre-populated table. This value is set to the register during
>> context bank initialisation.
>>
>> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
>> ---
>>   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 26 ++++++++++++++++++++++
>>   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h |  1 +
>>   2 files changed, 27 insertions(+)
>>
>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> index 38ac9cab763b..4ac272d05843 100644
>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> @@ -252,6 +252,20 @@ static bool qcom_adreno_can_do_ttbr1(struct arm_smmu_device *smmu)
>>   	return true;
>>   }
>>
>> +static void qcom_smmu_set_actlr_dev(struct device *dev, struct arm_smmu_device *smmu, int cbndx,
>> +		const struct of_device_id *client_match)
>> +{
>> +	const struct of_device_id *match =
>> +			of_match_device(client_match, dev);
>> +
>> +	if (!match) {
>> +		dev_notice(dev, "no ACTLR settings present\n");
> 
> dev_dbg() or even dev_vdbg(), please. We do not want to spam people with
> messages about a perfectly normal behaviour.
> 
> LGTM otherwise.

Ack, thanks Dmitry for the suggestion.
I was actually wondering if to broadcast this message
over the logs through dev_notice or give a option to
print it in debug level through dev_dbg.

But I'm inline with your suggestion now, will switch
to dev_dbg for this message.

Thanks & regards,
Bibek

> 
> 
>> +		return;
>> +	}
>> +
>> +	arm_smmu_cb_write(smmu, cbndx, ARM_SMMU_CB_ACTLR, (u64)match->data);
>> +}
>> +
>>   static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
>>   		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
>>   {
>> @@ -316,8 +330,20 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
>>   static int qcom_smmu_init_context(struct arm_smmu_domain *smmu_domain,
>>   		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
>>   {
>> +	struct arm_smmu_device *smmu = smmu_domain->smmu;
>> +	struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
>> +	const struct of_device_id *client_match;
>> +	int cbndx = smmu_domain->cfg.cbndx;
>> +
>>   	smmu_domain->cfg.flush_walk_prefer_tlbiasid = true;
>>
>> +	client_match = qsmmu->data->client_match;
>> +
>> +	if (!client_match)
>> +		return 0;
>> +
>> +	qcom_smmu_set_actlr_dev(dev, smmu, cbndx, client_match);
>> +
>>   	return 0;
>>   }
>>
>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
>> index b55cd3e3ae48..8addd453f5f1 100644
>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
>> @@ -28,6 +28,7 @@ struct qcom_smmu_match_data {
>>   	const struct qcom_smmu_config *cfg;
>>   	const struct arm_smmu_impl *impl;
>>   	const struct arm_smmu_impl *adreno_impl;
>> +	const struct of_device_id * const client_match;
>>   };
>>
>>   irqreturn_t qcom_smmu_context_fault(int irq, void *dev);
>> --
>> 2.34.1
>>
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  2024-09-20 15:58 ` [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings Bibek Kumar Patro
  2024-09-20 16:20   ` Dmitry Baryshkov
@ 2024-09-22 19:36   ` kernel test robot
  2024-09-24  9:10     ` Bibek Kumar Patro
  1 sibling, 1 reply; 14+ messages in thread
From: kernel test robot @ 2024-09-22 19:36 UTC (permalink / raw)
  To: Bibek Kumar Patro, robdclark, will, robin.murphy, joro, jgg,
	jsnitsel, robh, krzysztof.kozlowski, quic_c_gdjako,
	dmitry.baryshkov
  Cc: oe-kbuild-all, iommu, linux-arm-msm, linux-arm-kernel,
	linux-kernel, quic_bibekkum

Hi Bibek,

kernel test robot noticed the following build warnings:

[auto build test WARNING on linus/master]
[also build test WARNING on joro-iommu/next v6.11 next-20240920]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Bibek-Kumar-Patro/iommu-arm-smmu-re-enable-context-caching-in-smmu-reset-operation/20240921-000146
base:   linus/master
patch link:    https://lore.kernel.org/r/20240920155813.3434021-5-quic_bibekkum%40quicinc.com
patch subject: [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
config: arm-qcom_defconfig (https://download.01.org/0day-ci/archive/20240923/202409230343.Q8KnYl2w-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 13.3.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240923/202409230343.Q8KnYl2w-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202409230343.Q8KnYl2w-lkp@intel.com/

All warnings (new ones prefixed by >>):

   In file included from drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c:14:
   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c: In function 'qcom_smmu_set_actlr_dev':
>> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c:266:59: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
     266 |         arm_smmu_cb_write(smmu, cbndx, ARM_SMMU_CB_ACTLR, (u64)match->data);
         |                                                           ^
   drivers/iommu/arm/arm-smmu/arm-smmu.h:533:59: note: in definition of macro 'arm_smmu_cb_write'
     533 |         arm_smmu_writel((s), ARM_SMMU_CB((s), (n)), (o), (v))
         |                                                           ^


vim +266 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c

   254	
   255	static void qcom_smmu_set_actlr_dev(struct device *dev, struct arm_smmu_device *smmu, int cbndx,
   256			const struct of_device_id *client_match)
   257	{
   258		const struct of_device_id *match =
   259				of_match_device(client_match, dev);
   260	
   261		if (!match) {
   262			dev_notice(dev, "no ACTLR settings present\n");
   263			return;
   264		}
   265	
 > 266		arm_smmu_cb_write(smmu, cbndx, ARM_SMMU_CB_ACTLR, (u64)match->data);
   267	}
   268	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  2024-09-22 19:36   ` kernel test robot
@ 2024-09-24  9:10     ` Bibek Kumar Patro
  0 siblings, 0 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-24  9:10 UTC (permalink / raw)
  To: kernel test robot, robdclark, will, robin.murphy, joro, jgg,
	jsnitsel, robh, krzysztof.kozlowski, quic_c_gdjako,
	dmitry.baryshkov
  Cc: oe-kbuild-all, iommu, linux-arm-msm, linux-arm-kernel,
	linux-kernel



On 9/23/2024 1:06 AM, kernel test robot wrote:
> All warnings (new ones prefixed by >>):
> 
>     In file included from drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c:14:
>     drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c: In function 'qcom_smmu_set_actlr_dev':
>>> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c:266:59: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
>       266 |         arm_smmu_cb_write(smmu, cbndx, ARM_SMMU_CB_ACTLR, (u64)match->data);
>           |                                                           ^
>     drivers/iommu/arm/arm-smmu/arm-smmu.h:533:59: note: in definition of macro 'arm_smmu_cb_write'
>       533 |         arm_smmu_writel((s), ARM_SMMU_CB((s), (n)), (o), (v))
>           |


I'll fix this warning in next revision after other reviews are received.

regards,
Bibek

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  2024-09-20 15:58 [PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs Bibek Kumar Patro
                   ` (3 preceding siblings ...)
  2024-09-20 15:58 ` [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings Bibek Kumar Patro
@ 2024-09-20 15:58 ` Bibek Kumar Patro
  2024-09-20 16:18   ` Dmitry Baryshkov
  4 siblings, 1 reply; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 15:58 UTC (permalink / raw)
  To: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, dmitry.baryshkov
  Cc: iommu, linux-arm-msm, linux-arm-kernel, linux-kernel,
	quic_bibekkum

Add ACTLR data table for qcom_smmu_500 including
corresponding data entry and set prefetch value by
way of a list of compatible strings.

Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 4ac272d05843..e8f936a446df 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -25,8 +25,31 @@

 #define CPRE			(1 << 1)
 #define CMTLB			(1 << 0)
+#define PREFETCH_SHIFT		8
+#define PREFETCH_DEFAULT	0
+#define PREFETCH_SHALLOW	(1 << PREFETCH_SHIFT)
+#define PREFETCH_MODERATE	(2 << PREFETCH_SHIFT)
+#define PREFETCH_DEEP		(3 << PREFETCH_SHIFT)
 #define GFX_ACTLR_PRR		(1 << 5)

+static const struct of_device_id qcom_smmu_actlr_client_of_match[] = {
+	{ .compatible = "qcom,adreno",
+			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
+	{ .compatible = "qcom,adreno-gmu",
+			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
+	{ .compatible = "qcom,adreno-smmu",
+			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
+	{ .compatible = "qcom,fastrpc",
+			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
+	{ .compatible = "qcom,sc7280-mdss",
+			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
+	{ .compatible = "qcom,sc7280-venus",
+			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
+	{ .compatible = "qcom,sm8550-mdss",
+			.data = (const void *) (PREFETCH_DEFAULT | CMTLB) },
+	{ }
+};
+
 static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
 {
 	return container_of(smmu, struct qcom_smmu, smmu);
@@ -640,6 +663,7 @@ static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
 	.impl = &qcom_smmu_500_impl,
 	.adreno_impl = &qcom_adreno_smmu_500_impl,
 	.cfg = &qcom_smmu_impl0_cfg,
+	.client_match = qcom_smmu_actlr_client_of_match,
 };

 /*
--
2.34.1


^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  2024-09-20 15:58 ` [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500 Bibek Kumar Patro
@ 2024-09-20 16:18   ` Dmitry Baryshkov
  2024-09-20 19:59     ` Bibek Kumar Patro
  0 siblings, 1 reply; 14+ messages in thread
From: Dmitry Baryshkov @ 2024-09-20 16:18 UTC (permalink / raw)
  To: Bibek Kumar Patro
  Cc: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, iommu, linux-arm-msm,
	linux-arm-kernel, linux-kernel

On Fri, Sep 20, 2024 at 09:28:13PM GMT, Bibek Kumar Patro wrote:
> Add ACTLR data table for qcom_smmu_500 including
> corresponding data entry and set prefetch value by
> way of a list of compatible strings.
> 
> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
> ---
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index 4ac272d05843..e8f936a446df 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -25,8 +25,31 @@
> 
>  #define CPRE			(1 << 1)
>  #define CMTLB			(1 << 0)
> +#define PREFETCH_SHIFT		8
> +#define PREFETCH_DEFAULT	0
> +#define PREFETCH_SHALLOW	(1 << PREFETCH_SHIFT)
> +#define PREFETCH_MODERATE	(2 << PREFETCH_SHIFT)
> +#define PREFETCH_DEEP		(3 << PREFETCH_SHIFT)
>  #define GFX_ACTLR_PRR		(1 << 5)
> 
> +static const struct of_device_id qcom_smmu_actlr_client_of_match[] = {
> +	{ .compatible = "qcom,adreno",
> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> +	{ .compatible = "qcom,adreno-gmu",
> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> +	{ .compatible = "qcom,adreno-smmu",
> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> +	{ .compatible = "qcom,fastrpc",
> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> +	{ .compatible = "qcom,sc7280-mdss",
> +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
> +	{ .compatible = "qcom,sc7280-venus",
> +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
> +	{ .compatible = "qcom,sm8550-mdss",
> +			.data = (const void *) (PREFETCH_DEFAULT | CMTLB) },
> +	{ }
> +};

Wow, this looks really nice now!

> +
>  static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
>  {
>  	return container_of(smmu, struct qcom_smmu, smmu);
> @@ -640,6 +663,7 @@ static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
>  	.impl = &qcom_smmu_500_impl,
>  	.adreno_impl = &qcom_adreno_smmu_500_impl,
>  	.cfg = &qcom_smmu_impl0_cfg,
> +	.client_match = qcom_smmu_actlr_client_of_match,
>  };
> 
>  /*
> --
> 2.34.1
> 

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  2024-09-20 16:18   ` Dmitry Baryshkov
@ 2024-09-20 19:59     ` Bibek Kumar Patro
  2024-09-24  9:39       ` Dmitry Baryshkov
  0 siblings, 1 reply; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-20 19:59 UTC (permalink / raw)
  To: Dmitry Baryshkov
  Cc: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, iommu, linux-arm-msm,
	linux-arm-kernel, linux-kernel



On 9/20/2024 9:48 PM, Dmitry Baryshkov wrote:
> On Fri, Sep 20, 2024 at 09:28:13PM GMT, Bibek Kumar Patro wrote:
>> Add ACTLR data table for qcom_smmu_500 including
>> corresponding data entry and set prefetch value by
>> way of a list of compatible strings.
>>
>> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
>> ---
>>   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 24 ++++++++++++++++++++++
>>   1 file changed, 24 insertions(+)
>>
>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> index 4ac272d05843..e8f936a446df 100644
>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> @@ -25,8 +25,31 @@
>>
>>   #define CPRE			(1 << 1)
>>   #define CMTLB			(1 << 0)
>> +#define PREFETCH_SHIFT		8
>> +#define PREFETCH_DEFAULT	0
>> +#define PREFETCH_SHALLOW	(1 << PREFETCH_SHIFT)
>> +#define PREFETCH_MODERATE	(2 << PREFETCH_SHIFT)
>> +#define PREFETCH_DEEP		(3 << PREFETCH_SHIFT)
>>   #define GFX_ACTLR_PRR		(1 << 5)
>>
>> +static const struct of_device_id qcom_smmu_actlr_client_of_match[] = {
>> +	{ .compatible = "qcom,adreno",
>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>> +	{ .compatible = "qcom,adreno-gmu",
>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>> +	{ .compatible = "qcom,adreno-smmu",
>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>> +	{ .compatible = "qcom,fastrpc",
>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>> +	{ .compatible = "qcom,sc7280-mdss",
>> +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
>> +	{ .compatible = "qcom,sc7280-venus",
>> +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
>> +	{ .compatible = "qcom,sm8550-mdss",
>> +			.data = (const void *) (PREFETCH_DEFAULT | CMTLB) },
>> +	{ }
>> +};
> 
> Wow, this looks really nice now!
> 

I am also in favor of this compatible based approach now,
as it looks to be much cleaner implementation.

>> +
>>   static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
>>   {
>>   	return container_of(smmu, struct qcom_smmu, smmu);
>> @@ -640,6 +663,7 @@ static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
>>   	.impl = &qcom_smmu_500_impl,
>>   	.adreno_impl = &qcom_adreno_smmu_500_impl,
>>   	.cfg = &qcom_smmu_impl0_cfg,
>> +	.client_match = qcom_smmu_actlr_client_of_match,
>>   };
>>
>>   /*
>> --
>> 2.34.1
>>
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  2024-09-20 19:59     ` Bibek Kumar Patro
@ 2024-09-24  9:39       ` Dmitry Baryshkov
  2024-09-27 19:53         ` Bibek Kumar Patro
  0 siblings, 1 reply; 14+ messages in thread
From: Dmitry Baryshkov @ 2024-09-24  9:39 UTC (permalink / raw)
  To: Bibek Kumar Patro
  Cc: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, iommu, linux-arm-msm,
	linux-arm-kernel, linux-kernel

On Sat, Sep 21, 2024 at 01:29:04AM GMT, Bibek Kumar Patro wrote:
> 
> 
> On 9/20/2024 9:48 PM, Dmitry Baryshkov wrote:
> > On Fri, Sep 20, 2024 at 09:28:13PM GMT, Bibek Kumar Patro wrote:
> > > Add ACTLR data table for qcom_smmu_500 including
> > > corresponding data entry and set prefetch value by
> > > way of a list of compatible strings.
> > > 
> > > Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
> > > ---
> > >   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 24 ++++++++++++++++++++++
> > >   1 file changed, 24 insertions(+)
> > > 
> > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > > index 4ac272d05843..e8f936a446df 100644
> > > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > > @@ -25,8 +25,31 @@
> > > 
> > >   #define CPRE			(1 << 1)
> > >   #define CMTLB			(1 << 0)
> > > +#define PREFETCH_SHIFT		8
> > > +#define PREFETCH_DEFAULT	0
> > > +#define PREFETCH_SHALLOW	(1 << PREFETCH_SHIFT)
> > > +#define PREFETCH_MODERATE	(2 << PREFETCH_SHIFT)
> > > +#define PREFETCH_DEEP		(3 << PREFETCH_SHIFT)
> > >   #define GFX_ACTLR_PRR		(1 << 5)
> > > 
> > > +static const struct of_device_id qcom_smmu_actlr_client_of_match[] = {
> > > +	{ .compatible = "qcom,adreno",
> > > +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> > > +	{ .compatible = "qcom,adreno-gmu",
> > > +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> > > +	{ .compatible = "qcom,adreno-smmu",
> > > +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> > > +	{ .compatible = "qcom,fastrpc",
> > > +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
> > > +	{ .compatible = "qcom,sc7280-mdss",
> > > +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
> > > +	{ .compatible = "qcom,sc7280-venus",
> > > +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
> > > +	{ .compatible = "qcom,sm8550-mdss",
> > > +			.data = (const void *) (PREFETCH_DEFAULT | CMTLB) },
> > > +	{ }
> > > +};
> > 
> > Wow, this looks really nice now!
> > 
> 
> I am also in favor of this compatible based approach now,
> as it looks to be much cleaner implementation.


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


> 
> > > +
> > >   static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
> > >   {
> > >   	return container_of(smmu, struct qcom_smmu, smmu);
> > > @@ -640,6 +663,7 @@ static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
> > >   	.impl = &qcom_smmu_500_impl,
> > >   	.adreno_impl = &qcom_adreno_smmu_500_impl,
> > >   	.cfg = &qcom_smmu_impl0_cfg,
> > > +	.client_match = qcom_smmu_actlr_client_of_match,
> > >   };
> > > 
> > >   /*
> > > --
> > > 2.34.1
> > > 
> > 

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  2024-09-24  9:39       ` Dmitry Baryshkov
@ 2024-09-27 19:53         ` Bibek Kumar Patro
  0 siblings, 0 replies; 14+ messages in thread
From: Bibek Kumar Patro @ 2024-09-27 19:53 UTC (permalink / raw)
  To: Dmitry Baryshkov
  Cc: robdclark, will, robin.murphy, joro, jgg, jsnitsel, robh,
	krzysztof.kozlowski, quic_c_gdjako, iommu, linux-arm-msm,
	linux-arm-kernel, linux-kernel



On 9/24/2024 3:09 PM, Dmitry Baryshkov wrote:
> On Sat, Sep 21, 2024 at 01:29:04AM GMT, Bibek Kumar Patro wrote:
>>
>>
>> On 9/20/2024 9:48 PM, Dmitry Baryshkov wrote:
>>> On Fri, Sep 20, 2024 at 09:28:13PM GMT, Bibek Kumar Patro wrote:
>>>> Add ACTLR data table for qcom_smmu_500 including
>>>> corresponding data entry and set prefetch value by
>>>> way of a list of compatible strings.
>>>>
>>>> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
>>>> ---
>>>>    drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 24 ++++++++++++++++++++++
>>>>    1 file changed, 24 insertions(+)
>>>>
>>>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>>>> index 4ac272d05843..e8f936a446df 100644
>>>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>>>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>>>> @@ -25,8 +25,31 @@
>>>>
>>>>    #define CPRE			(1 << 1)
>>>>    #define CMTLB			(1 << 0)
>>>> +#define PREFETCH_SHIFT		8
>>>> +#define PREFETCH_DEFAULT	0
>>>> +#define PREFETCH_SHALLOW	(1 << PREFETCH_SHIFT)
>>>> +#define PREFETCH_MODERATE	(2 << PREFETCH_SHIFT)
>>>> +#define PREFETCH_DEEP		(3 << PREFETCH_SHIFT)
>>>>    #define GFX_ACTLR_PRR		(1 << 5)
>>>>
>>>> +static const struct of_device_id qcom_smmu_actlr_client_of_match[] = {
>>>> +	{ .compatible = "qcom,adreno",
>>>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>>>> +	{ .compatible = "qcom,adreno-gmu",
>>>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>>>> +	{ .compatible = "qcom,adreno-smmu",
>>>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>>>> +	{ .compatible = "qcom,fastrpc",
>>>> +			.data = (const void *) (PREFETCH_DEEP | CPRE | CMTLB) },
>>>> +	{ .compatible = "qcom,sc7280-mdss",
>>>> +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
>>>> +	{ .compatible = "qcom,sc7280-venus",
>>>> +			.data = (const void *) (PREFETCH_SHALLOW | CPRE | CMTLB) },
>>>> +	{ .compatible = "qcom,sm8550-mdss",
>>>> +			.data = (const void *) (PREFETCH_DEFAULT | CMTLB) },
>>>> +	{ }
>>>> +};
>>>
>>> Wow, this looks really nice now!
>>>
>>
>> I am also in favor of this compatible based approach now,
>> as it looks to be much cleaner implementation.
> 
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> 

Hi Robin/Will, let me know if you have any suggestions/inputs on this 
patch. If everything looks fine, I'll send the next iteration with 
Dmitry's inputs and update tags.

Thanks & regards,
Bibek

>>
>>>> +
>>>>    static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
>>>>    {
>>>>    	return container_of(smmu, struct qcom_smmu, smmu);
>>>> @@ -640,6 +663,7 @@ static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
>>>>    	.impl = &qcom_smmu_500_impl,
>>>>    	.adreno_impl = &qcom_adreno_smmu_500_impl,
>>>>    	.cfg = &qcom_smmu_impl0_cfg,
>>>> +	.client_match = qcom_smmu_actlr_client_of_match,
>>>>    };
>>>>
>>>>    /*
>>>> --
>>>> 2.34.1
>>>>
>>>
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2024-09-27 19:54 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-09-20 15:58 [PATCH v15 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs Bibek Kumar Patro
2024-09-20 15:58 ` [PATCH v15 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation Bibek Kumar Patro
2024-09-20 15:58 ` [PATCH v15 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer Bibek Kumar Patro
2024-09-20 15:58 ` [PATCH v15 3/5] iommu/arm-smmu: add support for PRR bit setup Bibek Kumar Patro
2024-09-20 15:58 ` [PATCH v15 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings Bibek Kumar Patro
2024-09-20 16:20   ` Dmitry Baryshkov
2024-09-20 19:34     ` Bibek Kumar Patro
2024-09-22 19:36   ` kernel test robot
2024-09-24  9:10     ` Bibek Kumar Patro
2024-09-20 15:58 ` [PATCH v15 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500 Bibek Kumar Patro
2024-09-20 16:18   ` Dmitry Baryshkov
2024-09-20 19:59     ` Bibek Kumar Patro
2024-09-24  9:39       ` Dmitry Baryshkov
2024-09-27 19:53         ` Bibek Kumar Patro

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox