From: Jakob Hauser <jahau@rocketmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: Stephan Gerhold <stephan@gerhold.net>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Jakob Hauser <jahau@rocketmail.com>
Subject: [PATCH] arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
Date: Thu, 14 Nov 2024 23:07:18 +0100 [thread overview]
Message-ID: <20241114220718.12248-1-jahau@rocketmail.com> (raw)
In-Reply-To: 20241114220718.12248-1-jahau.ref@rocketmail.com
From: Stephan Gerhold <stephan@gerhold.net>
Add the Samsung S6E88A0-AMS427AP24 panel to the device tree for the
Samsung Galaxy S4 Mini Value Edition. By default the panel displays
everything horizontally flipped, so add "flip-horizontal" to the panel
node to correct that.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Co-developed-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
---
Patch base is kernel/git/qcom/linux.git current branch "arm64-for-6.13".
The panel driver was recently added to linux-next:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/log/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams427ap24.c?h=next-20241101
The associated dt-binding in linux-next is:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams427ap24.yaml?h=next-20241101
---
.../dts/qcom/msm8916-samsung-serranove.dts | 58 +++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 5ce8f1350abc..caad1dead2e0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -321,6 +321,41 @@ &blsp_uart2 {
status = "okay";
};
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdss_default>;
+ pinctrl-1 = <&mdss_sleep>;
+
+ panel@0 {
+ compatible = "samsung,s6e88a0-ams427ap24";
+ reg = <0>;
+
+ vdd3-supply = <&pm8916_l17>;
+ vci-supply = <&pm8916_l6>;
+ reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+ flip-horizontal;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&panel_in>;
+};
+
&mpss_mem {
reg = <0x0 0x86800000 0x0 0x5a00000>;
};
@@ -330,6 +365,13 @@ &pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
};
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
&pm8916_vib {
status = "okay";
};
@@ -425,6 +467,22 @@ imu_irq_default: imu-irq-default-state {
bias-disable;
};
+ mdss_default: mdss-default-state {
+ pins = "gpio25";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ mdss_sleep: mdss-sleep-state {
+ pins = "gpio25";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
muic_i2c_default: muic-i2c-default-state {
pins = "gpio105", "gpio106";
function = "gpio";
--
2.39.5
next parent reply other threads:[~2024-11-14 22:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20241114220718.12248-1-jahau.ref@rocketmail.com>
2024-11-14 22:07 ` Jakob Hauser [this message]
2024-11-15 15:13 ` [PATCH] arm64: dts: qcom: msm8916-samsung-serranove: Add display panel Rob Herring (Arm)
2024-12-11 0:32 ` Jakob Hauser
2024-12-14 22:27 ` Konrad Dybcio
2025-01-09 18:27 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241114220718.12248-1-jahau@rocketmail.com \
--to=jahau@rocketmail.com \
--cc=andersson@kernel.org \
--cc=konradybcio@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=stephan@gerhold.net \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox