[PATCH v7 00/14] This is continued work on Samsung S9(SM-9600) starqltechn

[PATCH v7 00/14] This is continued work on Samsung S9(SM-9600) starqltechn

[Dzmitry Sankouski]

Contains starqltechn device tree changes.
Add support for new features:
- sound (headphones and mics only)
- gpu
- panel
- buttons
- MAX77705 MFD:
  - charger
  - fuelgauge
  - haptic
  - led

Binding Dependencies:
- s2dos05: https://lore.kernel.org/r/20241007-starqltechn_integration_upstream-v6-0-264309aa66de@gmail.com
  - This series was applied to krzk/linux.git (for-next)
- max77705: https://lore.kernel.org/r/20241204-starqltechn_integration_upstream-v10-0-7de85e48e562@gmail.com
- s6e3ha8 panel: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-0-8336b9cd6c34@gmail.com
  - applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

Runtime Dependencies:
- gcc845 gp clock: https://lore.kernel.org/r/20241007-starqltechn_integration_upstream-v6-0-dd75c06c708d@gmail.com

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v7:
- review fixes.
- new patch with dt-binding header for wcd934x
- Link to v6: https://lore.kernel.org/r/20241008-starqltechn_integration_upstream-v6-0-5445365d3052@gmail.com

Changes in v6:
- refactor: no space between tags in commit message
- rename starqltechn to sdm845-starqltechn in commit summaries
- Link to v5: https://lore.kernel.org/r/20240926-starqltechn_integration_upstream-v5-0-d2084672ff2f@gmail.com

Changes in v5:
- Split patchset per subsystem
- Add links to subsystem patchsets in description
- Link to v4: https://lore.kernel.org/r/20240913-starqltechn_integration_upstream-v4-0-2d2efd5c5877@gmail.com

Changes in v4:
- Rewrite max77705, max77705_charger, max77705_fuel_gauge from scratch
- Reorder patches:
  - squash max77705 subdevice bindings in core file because
    no resources there
  - split device tree changes
- Use _ as space for filenames in power/supply like the majority
- Replace gcc-845 freq_tbl frequencies patch with new approach,
  based on automatic m/n/pre_div value generation
- Link to v3: https://lore.kernel.org/r/20240618-starqltechn_integration_upstream-v3-0-e3f6662017ac@gmail.com

Changes in version 3:
- disable crypto patch removed(disabled on distro level)
- dts framebuffer node along with related patches removed,
because panel driver added
- fix 'make O=.output_arm64 CHECK_DTBS=y qcom/sdm845-samsung-starqltechn.dtb'
errors, but it still complains on 'monitored-battery' and
'power-supplies' though I have 'power-supply.yaml' link in charger
and fuel gauge bindings.

---
Dzmitry Sankouski (14):
      ASoC: dt-bindings: Add bindings for WCD934x DAIs
      ASoC: codecs: wcd934x: use wcd934x binding header
      arm64: dts: qcom: sdm845: enable gmu
      arm64: dts: qcom: sdm845-starqltechn: remove wifi
      arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
      arm64: dts: qcom: sdm845-starqltechn: refactor node order
      arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
      arm64: dts: qcom: sdm845-starqltechn: add gpio keys
      arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC
      arm64: dts: qcom: sdm845-starqltechn: add display PMIC
      arm64: dts: qcom: sdm845-starqltechn: add touchscreen support
      arm64: dts: qcom: sdm845-starqltechn: add initial sound support
      arm64: dts: qcom: sdm845-starqltechn: add graphics support
      arm64: dts: qcom: sdm845-starqltechn: add modem support

 MAINTAINERS                                                  |   1 +
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi                   |   4 -
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts                   |   4 -
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts                      |   4 -
 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi          |   4 -
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts      | 596 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts            |   4 -
 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi        |   4 -
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi |   4 -
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts           |   4 -
 arch/arm64/boot/dts/qcom/sdm845.dtsi                         |   2 -
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts         |   4 -
 include/dt-bindings/sound/qcom,wcd934x.h                     |  17 ++++
 sound/soc/codecs/wcd934x.c                                   |  15 +--
 14 files changed, 607 insertions(+), 60 deletions(-)
---
base-commit: f486c8aa16b8172f63bddc70116a0c897a7f3f02
change-id: 20240617-starqltechn_integration_upstream-bc86850b2fe3

Best regards,
-- 
Dzmitry Sankouski <dsankouski@gmail.com>

[PATCH v7 01/14] ASoC: dt-bindings: Add bindings for WCD934x DAIs

[Dzmitry Sankouski]

Add bindings for the DAIs available in WCD934x to avoid
having to use unclear number indices in device trees.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
 MAINTAINERS                              |  1 +
 include/dt-bindings/sound/qcom,wcd934x.h | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 1240e75ecf4b..b25a196c5fab 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18984,6 +18984,7 @@ F:	Documentation/devicetree/bindings/soc/qcom/qcom,apr*
 F:	Documentation/devicetree/bindings/sound/qcom,*
 F:	drivers/soc/qcom/apr.c
 F:	include/dt-bindings/sound/qcom,wcd9335.h
+F:	include/dt-bindings/sound/qcom,wcd934x.h
 F:	sound/soc/codecs/lpass-rx-macro.*
 F:	sound/soc/codecs/lpass-tx-macro.*
 F:	sound/soc/codecs/lpass-va-macro.c
diff --git a/include/dt-bindings/sound/qcom,wcd934x.h b/include/dt-bindings/sound/qcom,wcd934x.h
new file mode 100644
index 000000000000..68c3d43ee898
--- /dev/null
+++ b/include/dt-bindings/sound/qcom,wcd934x.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef __DT_SOUND_QCOM_WCD934x_H
+#define __DT_SOUND_QCOM_WCD934x_H
+
+#define AIF1_PB                 0
+#define AIF1_CAP                1
+#define AIF2_PB                 2
+#define AIF2_CAP                3
+#define AIF3_PB                 4
+#define AIF3_CAP                5
+#define AIF4_PB                 6
+#define	AIF4_VIFEED             7
+#define	AIF4_MAD_TX             8
+#define NUM_CODEC_DAIS          9
+
+#endif

-- 
2.39.5

[PATCH v7 02/14] ASoC: codecs: wcd934x: use wcd934x binding header

[Dzmitry Sankouski]

Replace AIF* enum with binding header include.
This allow to get rid of mysterious indeces in dts.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
 sound/soc/codecs/wcd934x.c | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index 910852eb9698..a730d7195bc1 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -23,6 +23,8 @@
 #include "wcd-clsh-v2.h"
 #include "wcd-mbhc-v2.h"
 
+#include <dt-bindings/sound/qcom,wcd934x.h>
+
 #define WCD934X_RATES_MASK (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
 			    SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\
 			    SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000)
@@ -434,19 +436,6 @@ enum {
 	COMPANDER_MAX,
 };
 
-enum {
-	AIF1_PB = 0,
-	AIF1_CAP,
-	AIF2_PB,
-	AIF2_CAP,
-	AIF3_PB,
-	AIF3_CAP,
-	AIF4_PB,
-	AIF4_VIFEED,
-	AIF4_MAD_TX,
-	NUM_CODEC_DAIS,
-};
-
 enum {
 	INTn_1_INP_SEL_ZERO = 0,
 	INTn_1_INP_SEL_DEC0,

-- 
2.39.5

[PATCH v7 03/14] arm64: dts: qcom: sdm845: enable gmu

[Dzmitry Sankouski]

Leave gmu enabled, because it's only probed when
GPU is.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v5:
- delete gmu node from sdm850-lenovo-yoga-c630
  (it's imported from sdm845.dtsi)
---
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi                   | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts                   | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts                      | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi          | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts            | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi        | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 4 ----
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts           | 4 ----
 arch/arm64/boot/dts/qcom/sdm845.dtsi                         | 2 --
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts         | 4 ----
 10 files changed, 38 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 743c339ba108..b7e514f81f92 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -741,10 +741,6 @@ touchscreen@10 {
 	};
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 1cc0f571e1f7..92f8cc7e2fed 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -444,10 +444,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 2391f842c903..d31efad8a321 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -414,10 +414,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 46e25c53829a..8a0f154bffc3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -345,10 +345,6 @@ &gcc {
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 486ce175e6bc..87fc4021e024 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -419,10 +419,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index b02a1dc5fecd..a3a304e1ac87 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -415,10 +415,6 @@ &gcc {
 			<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 617b17b2d7d9..f790eb73abdd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -239,10 +239,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index e386b504e978..501575c9beda 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -381,10 +381,6 @@ &gcc {
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 1ed794638a7c..e9d5565b52e2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4948,8 +4948,6 @@ gmu: gmu@506a000 {
 
 			operating-points-v2 = <&gmu_opp_table>;
 
-			status = "disabled";
-
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index f18050848cd8..ca81f3664abd 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -355,10 +355,6 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
 	zap-shader {

-- 
2.39.5

[PATCH v7 04/14] arm64: dts: qcom: sdm845-starqltechn: remove wifi

[Dzmitry Sankouski]

Starqltechn has broadcom chip for wifi, so sdm845 wifi part
can be disabled.

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d37a433130b9..6fc30fd1262b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -418,14 +418,6 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-	status = "okay";
-};
-
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
 

-- 
2.39.5

[PATCH v7 05/14] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake

[Dzmitry Sankouski]

Usb regulator was wrongly pointed to vreg_l1a_0p875.
However, on starqltechn it's powered from vreg_l5a_0p8.

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 6fc30fd1262b..f3f2b25883d8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -135,8 +135,6 @@ vdda_pll_cc_ebi23:
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
@@ -157,6 +155,7 @@ vreg_l3a_1p0: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:

-- 
2.39.5

[PATCH v7 06/14] arm64: dts: qcom: sdm845-starqltechn: refactor node order

[Dzmitry Sankouski]

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index f3f2b25883d8..8a0d63bd594b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -382,8 +382,8 @@ &ufs_mem_phy {
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;

-- 
2.39.5

[PATCH v7 07/14] arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios

[Dzmitry Sankouski]

Starqltechn has 2 reserved gpio ranges <27 4>, <85 4>.
<27 4> is spi for eSE(embedded Secure Element).
<85 4> is spi for fingerprint.

Remove excess reserved gpio regions.

Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v6:
- refactor: no space between tag in commit message.
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 8a0d63bd594b..5948b401165c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -418,7 +418,8 @@ &usb_1_qmpphy {
 };
 
 &tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
+			       <85 4>; /* SPI (fingerprint reader) */
 
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";

-- 
2.39.5

[PATCH v7 08/14] arm64: dts: qcom: sdm845-starqltechn: add gpio keys

[Dzmitry Sankouski]

Add support for phone buttons.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v7:
- s/_/-/ in node name
- rename key labels
- move pm8998_gpios with chg_int_default pin

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 5948b401165c..38c09e50ccfb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -7,9 +7,11 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
 
 / {
 	chassis-type = "handset";
@@ -69,6 +71,25 @@ memory@a1300000 {
 			pmsg-size = <0x40000>;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		key-wink {
+			label = "Bixby";
+			gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			debounce-interval = <15>;
+		};
+	};
 };
 
 
@@ -417,6 +438,11 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */

-- 
2.39.5

[PATCH v7 09/14] arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC

[Dzmitry Sankouski]

Add support for max77705 MFD device. Supported sub-devices:
 charger, fuelgauge, haptic, led

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v7:
- adjust fuelgauge node for max17042 driver
  (remove monitored-battery because not supprted, rename
   shunt resistor property)
- reorder 'haptic' fixed regulator node
- move 'haptic' fixed regulator node to regulators
- change leds compatible *-led *-rgb
- wrap leds into multi-led node
- add fuelgauge reg property
- wrap led properties into multi-led
- add chg_int_default pinctrl

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
- refactor: 'm' < 's', so putting motor tlmm nodes first

Changes in v5:
- fix according to binding changes
- reorder vib_pwm node
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 126 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 38c09e50ccfb..c143501700a4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
@@ -18,6 +19,16 @@ / {
 	model = "Samsung Galaxy S9 SM-G9600";
 	compatible = "samsung,starqltechn", "qcom,sdm845";
 
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <2150000>;
+		charge-full-design-microamp-hours = <3000000>;
+
+		over-voltage-threshold-microvolt = <4500000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -32,6 +43,19 @@ framebuffer: framebuffer@9d400000 {
 		};
 	};
 
+	vib_regulator: gpio-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "haptic";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-boot-on;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -90,6 +114,17 @@ key-wink {
 			debounce-interval = <15>;
 		};
 	};
+
+	vib_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		assigned-clock-parents = <&rpmhcc RPMH_CXO_CLK>;
+		assigned-clocks = <&gcc GCC_GP1_CLK_SRC>;
+		clocks = <&gcc GCC_GP1_CLK>;
+		pinctrl-0 = <&motor_pwm_default_state>;
+		pinctrl-1 = <&motor_pwm_suspend_state>;
+		pinctrl-names = "default", "suspend";
+	};
 };
 
 
@@ -385,10 +420,75 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &uart9 {
 	status = "okay";
 };
 
+&i2c14 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "maxim,max77705";
+		reg = <0x66>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&chg_int_default>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		leds {
+			compatible = "maxim,max77705-rgb";
+
+			multi-led {
+				color = <LED_COLOR_ID_RGB>;
+				function = LED_FUNCTION_STATUS;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_RED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+				};
+
+				led@3 {
+					reg = <3>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+			};
+		};
+
+		max77705_charger: charger {
+			compatible = "maxim,max77705-charger";
+			monitored-battery = <&battery>;
+		};
+
+		fuel-gauge@36 {
+			compatible = "maxim,max77705-battery";
+			reg = <0x36>;
+			power-supplies = <&max77705_charger>;
+			maxim,rsns-microohm = <5000>;
+			interrupt-parent = <&pm8998_gpios>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		haptic {
+			compatible = "maxim,max77705-haptic";
+			haptic-supply = <&vib_regulator>;
+			pwms = <&vib_pwm 0 100000>;
+		};
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l20a_2p95>;
@@ -443,10 +543,36 @@ &pm8998_resin {
 	status = "okay";
 };
 
+&pm8998_gpios {
+	chg_int_default: chg-int-default-state {
+		pins = "gpio11";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */
 
+	motor_pwm_default_state: motor-pwm-active-state {
+		pins = "gpio57";
+		function = "gcc_gp1";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	motor_pwm_suspend_state: motor-pwm-suspend-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
 		bias-disable;

-- 
2.39.5

[PATCH v7 10/14] arm64: dts: qcom: sdm845-starqltechn: add display PMIC

[Dzmitry Sankouski]

Add support for s2dos05 display / touchscreen PMIC

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v7:
- move i2c21 node before gpio-keys

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
- refactor: 'i' < 'm', so put tlmm i2c node before motor*

Changes in v5:
- simplify regulator names
- remove single buck index
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index c143501700a4..44a70f2f5a09 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -40,6 +40,9 @@ framebuffer: framebuffer@9d400000 {
 			height = <2960>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
+			vci-supply = <&s2dos05_ldo4>;
+			vddr-supply = <&s2dos05_buck>;
+			vdd3-supply = <&s2dos05_ldo1>;
 		};
 	};
 
@@ -96,6 +99,66 @@ memory@a1300000 {
 		};
 	};
 
+	i2c21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@60 {
+			compatible = "samsung,s2dos05";
+			reg = <0x60>;
+
+			regulators {
+				s2dos05_ldo1: ldo1 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-name = "ldo1";
+				};
+
+				s2dos05_ldo2: ldo2 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-name = "ldo2";
+				};
+
+				s2dos05_ldo3: ldo3 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-name = "ldo3";
+				};
+
+				s2dos05_ldo4: ldo4 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <3775000>;
+					regulator-name = "ldo4";
+				};
+
+				s2dos05_buck: buck {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-name = "buck";
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -557,6 +620,20 @@ &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */
 
+	i2c21_sda_state: i2c21-sda-state {
+		pins = "gpio127";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c21_scl_state: i2c21-scl-state {
+		pins = "gpio128";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	motor_pwm_default_state: motor-pwm-active-state {
 		pins = "gpio57";
 		function = "gcc_gp1";

-- 
2.39.5

[PATCH v7 11/14] arm64: dts: qcom: sdm845-starqltechn: add touchscreen support

[Dzmitry Sankouski]

Add support for samsung,s6sy761 touchscreen.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 44a70f2f5a09..039feb07ef60 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -574,6 +574,23 @@ &sdhc_2 {
 	status = "okay";
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&s2dos05_ldo2>;
+		avdd-supply = <&s2dos05_ldo3>;
+
+		pinctrl-0 = <&touch_irq_state>;
+		pinctrl-names = "default";
+	};
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -678,4 +695,15 @@ sd_card_det_n_state: sd-card-det-n-state {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	touch_irq_state: touch-irq-state {
+		pins = "gpio120";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
 };

-- 
2.39.5

[PATCH v7 12/14] arm64: dts: qcom: sdm845-starqltechn: add initial sound support

[Dzmitry Sankouski]

Add support for sound (headphones and mics only)
Also redefine slpi reserved memory, because adsp_mem overlaps with
slpi_mem inherited from sdm845.dtsi.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

---
Changes in v7:
- replace indeces with constants from dt-bindings/sound/qcom,wcd9340.h
- add spaces after 'link-name' node
- remove not connected digital mics from audio routing
- add DMIC(0|2) -> MCLK routing, because digital mics
  need clocks
- align mapping comments, add dmics comment

Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 223 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 223 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 039feb07ef60..04ef4f030931 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -11,8 +11,16 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd934x.h>
+
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
+#include "sdm845-wcd9340.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
 
 / {
 	chassis-type = "handset";
@@ -97,6 +105,16 @@ memory@a1300000 {
 			ftrace-size = <0x40000>;
 			pmsg-size = <0x40000>;
 		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0xf00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@97800000 {
+			reg = <0 0x97800000 0 0x2000000>;
+			no-map;
+		};
 	};
 
 	i2c21 {
@@ -591,6 +609,211 @@ touchscreen@48 {
 	};
 };
 
+&adsp_pas {
+	firmware-name = "qcom/sdm845/starqltechn/adsp.mbn";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung Galaxy S9";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio-routing =	"RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",	/* Headset Mic */
+			"AMIC3", "MIC BIAS2",	/* FMLeft Tx */
+			"AMIC4", "MIC BIAS2",	/* FMRight Tx */
+			"DMIC0", "MCLK",	/* Bottom Mic */
+			"DMIC0", "MIC BIAS1",
+			"DMIC2", "MCLK",	/* Top Mic */
+			"DMIC2", "MIC BIAS3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_CAP>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_PB>;
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_CAP>;
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 AIF3_CAP>;
+		};
+	};
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
 &usb_1 {
 	status = "okay";
 };

-- 
2.39.5

[PATCH v7 13/14] arm64: dts: qcom: sdm845-starqltechn: add graphics support

[Dzmitry Sankouski]

Add support for gpu and panel.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes for v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject
- refactor: remove 'sde' prefix in tlmm dsi nodes
- refactor: place tlmm dsi nodes alphabetically

Changes for v5:
- fix label names
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 04ef4f030931..15997cb88576 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -208,6 +208,52 @@ vib_pwm: pwm {
 	};
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3ha8";
+		reg = <0>;
+		vci-supply = <&s2dos05_ldo4>;
+		vddr-supply = <&s2dos05_buck>;
+		vdd3-supply = <&s2dos05_ldo1>;
+		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&dsi_default &dsi_te>;
+		pinctrl-1 = <&dsi_suspend &dsi_te>;
+		pinctrl-names = "default", "suspend";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
 
 &apps_rsc {
 	regulators-0 {
@@ -860,6 +906,27 @@ &tlmm {
 	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
 			       <85 4>; /* SPI (fingerprint reader) */
 
+	dsi_default: dsi-default-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_te: dsi-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	i2c21_sda_state: i2c21-sda-state {
 		pins = "gpio127";
 		function = "gpio";

-- 
2.39.5

[PATCH v7 14/14] arm64: dts: qcom: sdm845-starqltechn: add modem support

[Dzmitry Sankouski]

Add support for modem and ipa(IP Accelerator).
Add spss reserved memory node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v6:
- refactor: s/starqltechn/sdm845-starqltechn in subject.
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 15997cb88576..4583d071409d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -19,6 +19,8 @@
 #include "pm8998.dtsi"
 #include "sdm845-wcd9340.dtsi"
 
+/delete-node/ &rmtfs_mem;
+/delete-node/ &spss_mem;
 /delete-node/ &adsp_mem;
 /delete-node/ &slpi_mem;
 
@@ -106,15 +108,39 @@ memory@a1300000 {
 			pmsg-size = <0x40000>;
 		};
 
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			reg = <0 0x88f00000 0 0x1c00000>;
+			no-map;
+		};
+
 		slpi_mem: slpi@96700000 {
 			reg = <0 0x96700000 0 0xf00000>;
 			no-map;
 		};
 
+		spss_mem: spss@97700000 {
+			reg = <0 0x97700000 0 0x100000>;
+			no-map;
+		};
+
 		adsp_mem: memory@97800000 {
 			reg = <0 0x97800000 0 0x2000000>;
 			no-map;
 		};
+
+		rmtfs_mem: rmtfs-mem@fde00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xfde00000 0 0x202000>;
+			qcom,use-guard-pages;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
 	};
 
 	i2c21 {
@@ -860,6 +886,19 @@ dai@5 {
 	};
 };
 
+&mss_pil {
+	firmware-name = "qcom/sdm845/starqltechn/mba.mbn",
+			"qcom/sdm845/starqltechn/modem.mbn";
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };

-- 
2.39.5

Re: [PATCH v7 01/14] ASoC: dt-bindings: Add bindings for WCD934x DAIs

[Krzysztof Kozlowski]

On Thu, Dec 05, 2024 at 12:34:48AM +0300, Dzmitry Sankouski wrote:
> +#define AIF1_PB                 0
> +#define AIF1_CAP                1
> +#define AIF2_PB                 2
> +#define AIF2_CAP                3
> +#define AIF3_PB                 4
> +#define AIF3_CAP                5
> +#define AIF4_PB                 6
> +#define	AIF4_VIFEED             7
> +#define	AIF4_MAD_TX             8

Some odd indent appeared after #define

> +#define NUM_CODEC_DAIS          9

Drop, not a binding.

Best regards,
Krzysztof

Re: [PATCH v7 05/14] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake

[Konrad Dybcio]

On 4.12.2024 10:34 PM, Dzmitry Sankouski wrote:
> Usb regulator was wrongly pointed to vreg_l1a_0p875.
> However, on starqltechn it's powered from vreg_l5a_0p8.
> 
> Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v7 08/14] arm64: dts: qcom: sdm845-starqltechn: add gpio keys

[Konrad Dybcio]

On 4.12.2024 10:34 PM, Dzmitry Sankouski wrote:
> Add support for phone buttons.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v7 11/14] arm64: dts: qcom: sdm845-starqltechn: add touchscreen support

[Konrad Dybcio]

On 4.12.2024 10:34 PM, Dzmitry Sankouski wrote:
> Add support for samsung,s6sy761 touchscreen.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v7 12/14] arm64: dts: qcom: sdm845-starqltechn: add initial sound support

[Konrad Dybcio]

On 4.12.2024 10:34 PM, Dzmitry Sankouski wrote:
> Add support for sound (headphones and mics only)
> Also redefine slpi reserved memory, because adsp_mem overlaps with
> slpi_mem inherited from sdm845.dtsi.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> 
> ---

[...]


> +	audio-routing =	"RX_BIAS", "MCLK",
> +			"AMIC2", "MIC BIAS2",	/* Headset Mic */
> +			"AMIC3", "MIC BIAS2",	/* FMLeft Tx */
> +			"AMIC4", "MIC BIAS2",	/* FMRight Tx */

FM - FM radio, or "Front Mic" / earpiece?

> +			"DMIC0", "MCLK",	/* Bottom Mic */
> +			"DMIC0", "MIC BIAS1",
> +			"DMIC2", "MCLK",	/* Top Mic */

Looking at some pictures, I'm guessing these two are the little holes
in the top/bottom edges of the device?

Konrad

Re: [PATCH v7 12/14] arm64: dts: qcom: sdm845-starqltechn: add initial sound support

[Dzmitry Sankouski]

чт, 5 дек. 2024 г. в 19:45, Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>:
>
> On 4.12.2024 10:34 PM, Dzmitry Sankouski wrote:
> > Add support for sound (headphones and mics only)
> > Also redefine slpi reserved memory, because adsp_mem overlaps with
> > slpi_mem inherited from sdm845.dtsi.
> >
> > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> >
> > ---
>
> [...]
>
>
> > +     audio-routing = "RX_BIAS", "MCLK",
> > +                     "AMIC2", "MIC BIAS2",   /* Headset Mic */
> > +                     "AMIC3", "MIC BIAS2",   /* FMLeft Tx */
> > +                     "AMIC4", "MIC BIAS2",   /* FMRight Tx */
>
> FM - FM radio, or "Front Mic" / earpiece?

FM radio. I'll fix the comment to avoid ambiguity.

>
> > +                     "DMIC0", "MCLK",        /* Bottom Mic */
> > +                     "DMIC0", "MIC BIAS1",
> > +                     "DMIC2", "MCLK",        /* Top Mic */
>
> Looking at some pictures, I'm guessing these two are the little holes
> in the top/bottom edges of the device?

Yes.

-- 
Best regards and thanks for review,
Dzmitry