[PATCH v2 2/2] drm/msm/disp: Correct porch timing for SDM845

["James A. MacInnes" <james.a.macinnes@gmail.com>]

Type-C DisplayPort inoperable due to incorrect porch settings.
- Re-used wide_bus_en as flag to prevent porch shifting

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index abd6600046cb..a21addc4794f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -94,17 +94,21 @@ static void drm_mode_to_intf_timing_params(
 		timing->vsync_polarity = 0;
 	}
 
-	/* for DP/EDP, Shift timings to align it to bottom right */
-	if (phys_enc->hw_intf->cap->type == INTF_DP) {
+	timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
+	timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent);
+
+	/*
+	 *  For DP/EDP, Shift timings to align it to bottom right.
+	 *  wide_bus_en is set for everything excluding SDM845 &
+	 *  porch changes cause DisplayPort failure and HDMI tearing.
+	 */
+	if (phys_enc->hw_intf->cap->type == INTF_DP && timing->wide_bus_en) {
 		timing->h_back_porch += timing->h_front_porch;
 		timing->h_front_porch = 0;
 		timing->v_back_porch += timing->v_front_porch;
 		timing->v_front_porch = 0;
 	}
 
-	timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
-	timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent);
-
 	/*
 	 * for DP, divide the horizonal parameters by 2 when
 	 * widebus is enabled

-- 
2.43.0