From: Vikram Sharma <quic_vikramsa@quicinc.com>
To: <bryan.odonoghue@linaro.org>, <mchehab@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<andersson@kernel.org>, <konradybcio@kernel.org>,
<hverkuil-cisco@xs4all.nl>, <cros-qcom-dts-watchers@chromium.org>,
<catalin.marinas@arm.com>, <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<quic_svankada@quicinc.com>, <linux-media@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <quic_nihalkum@quicinc.com>,
<quic_vikramsa@quicinc.com>
Subject: [PATCH v5 0/3] Add CCI and imx577 sensor support for monaco evk
Date: Fri, 14 Nov 2025 12:15:38 +0530 [thread overview]
Message-ID: <20251114064541.446276-1-quic_vikramsa@quicinc.com> (raw)
From: Nihal Kumar Gupta <nihalkum@qti.qualcomm.com>
Monaco EVK is a single-board computer based on the Qualcomm QCS8300 SoC.
It lacks a camera sensor in its default configuration.
This series adds CCI support and enables the IMX577 sensor via CSIPHY1
through device tree overlay.
We have tested IMX577 Sensor on CCI1 with following commands:
- media-ctl --reset
- media-ctl -V '"imx577 3-001a":0[fmt:SRGGB10/4056x3040 field:none]'
- media-ctl -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
- media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
- media-ctl -l '"msm_csiphy1":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video1
---
This patch series depends on patch series:
https://lore.kernel.org/all/20251107162521.511536-1-quic_vikramsa@quicinc.com
Bindings for Supplies are added by below patch:
https://lore.kernel.org/all/20251107162521.511536-1-quic_vikramsa@quicinc.com
Changes in v5:
- Rename cciX_i2cY_* to cciX_Y_* to shorten the labels - Vladimir
- Added description of pins with MCLK function - Vladimir
- Link to v4:
https://lore.kernel.org/all/20251015131303.2797800-1-quic_vikramsa@quicinc.com
Changes in v4:
- Remove the AXI source clock from the CCI node - Konrad
- Updated the qcs8300-camss device tree binding.
- Link to v3:
https://lore.kernel.org/all/20250917130647.1701883-1-quic_vikramsa@quicinc.com
Changes in v3:
- Updated and Wrapped commit messages for [PATCH v2 1/3] and [PATCH v2 2/3] - Rob
- Link to v2:
https://lore.kernel.org/all/20250912141134.2799078-1-quic_vikramsa@quicinc.com
Changes in v2:
- Remove the patch that adds PHY supply documentation in the qcs8300 CAMSS.
bindings. This change should be submitted together with the qcs8300 bindings patch.
- Fix indentation and regulator node name - Krzysztof.
- Update commit message as suggested - Dmitry.
- Link to v1:
https://lore.kernel.org/lkml/20250909114241.840842-1-quic_vikramsa@quicinc.com
Used following tools for the sanity check of these changes.
- make -j32 W=1
- checkpatch.pl
- make DT_CHECKER_FLAGS=-m W=1 DT_SCHEMA_FILES=i2c/qcom,i2c-cci.yaml dt_binding_check
- make CHECK_DTBS=y W=1 DT_SCHEMA_FILES=i2c/qcom,i2c-cci.yaml
- make DT_CHECKER_FLAGS=-m W=1 DT_SCHEMA_FILES=media/qcom,qcs8300-camss.yaml dt_binding_check
- make CHECK_DTBS=y W=1 DT_SCHEMA_FILES=media/qcom,qcs8300-camss.yaml
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Nihal Kumar Gupta (3):
dt-bindings: i2c: qcom-cci: Document qcs8300 compatible
arm64: dts: qcom: qcs8300: Add CCI definitions
arm64: dts: qcom: monaco-evk-camera: Add DT overlay
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../dts/qcom/monaco-evk-camera-imx577.dtso | 105 ++++++
arch/arm64/boot/dts/qcom/monaco.dtsi | 303 ++++++++++++++++++
4 files changed, 414 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso
--
2.34.1
next reply other threads:[~2025-11-14 6:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-14 6:45 Vikram Sharma [this message]
2025-11-14 6:45 ` [PATCH v5 1/3] dt-bindings: i2c: qcom-cci: Document qcs8300 compatible Vikram Sharma
2025-11-14 6:45 ` [PATCH v5 2/3] arm64: dts: qcom: qcs8300: Add CCI definitions Vikram Sharma
2025-11-14 22:16 ` Konrad Dybcio
2025-11-14 6:45 ` [PATCH v5 3/3] arm64: dts: qcom: monaco-evk-camera: Add DT overlay Vikram Sharma
2025-11-14 22:19 ` Konrad Dybcio
2025-11-15 5:53 ` Nihal Kumar Gupta
2025-11-17 12:37 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251114064541.446276-1-quic_vikramsa@quicinc.com \
--to=quic_vikramsa@quicinc.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=quic_nihalkum@quicinc.com \
--cc=quic_svankada@quicinc.com \
--cc=robh@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox