From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: andersson@kernel.org, mathieu.poirier@linaro.org,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
p.zabel@pengutronix.de,
Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>,
Govind Singh <govinds@codeaurora.org>
Cc: konrad.dybcio@oss.qualcomm.com, linux-kernel@vger.kernel.org,
Alexandru Gagniuc <mr.nuke.me@gmail.com>
Subject: [PATCH v2 2/2] remoteproc: qcom_q6v5_wcss: drop redundant wcss_q6_bcr_reset
Date: Tue, 2 Dec 2025 10:26:25 -0600 [thread overview]
Message-ID: <20251202162626.1135615-2-mr.nuke.me@gmail.com> (raw)
In-Reply-To: <20251202162626.1135615-1-mr.nuke.me@gmail.com>
The wcss_q6_bcr_reset used on QCS404, and wcss_q6_reset used on IPQ
are the same. "BCR reset" is redundant, and likely a mistake. Use the
documented "wcss_q6_reset" instead. Drop ".wcss_q6_reset_required"
from the descriptor, since all targets now need it.
Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
Changes since v1:
- rework change to unify wcss_q6_bcr_reset and wcss_q6_reset
drivers/remoteproc/qcom_q6v5_wcss.c | 22 +++++-----------------
1 file changed, 5 insertions(+), 17 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 23ec87827d4f8..465119201c345 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -96,7 +96,6 @@ struct wcss_data {
unsigned int crash_reason_smem;
u32 version;
bool aon_reset_required;
- bool wcss_q6_reset_required;
const char *ssr_name;
const char *sysmon_name;
int ssctl_id;
@@ -134,7 +133,6 @@ struct q6v5_wcss {
struct reset_control *wcss_aon_reset;
struct reset_control *wcss_reset;
struct reset_control *wcss_q6_reset;
- struct reset_control *wcss_q6_bcr_reset;
struct qcom_q6v5 q6v5;
@@ -309,7 +307,7 @@ static int q6v5_wcss_qcs404_power_on(struct q6v5_wcss *wcss)
return ret;
/* Remove reset to the WCNSS QDSP6SS */
- reset_control_deassert(wcss->wcss_q6_bcr_reset);
+ reset_control_deassert(wcss->wcss_q6_reset);
/* Enable Q6SSTOP_AHBFABRIC_CBCR clock */
ret = clk_prepare_enable(wcss->ahbfabric_cbcr_clk);
@@ -803,18 +801,10 @@ static int q6v5_wcss_init_reset(struct q6v5_wcss *wcss,
return PTR_ERR(wcss->wcss_reset);
}
- if (desc->wcss_q6_reset_required) {
- wcss->wcss_q6_reset = devm_reset_control_get_exclusive(dev, "wcss_q6_reset");
- if (IS_ERR(wcss->wcss_q6_reset)) {
- dev_err(wcss->dev, "unable to acquire wcss_q6_reset\n");
- return PTR_ERR(wcss->wcss_q6_reset);
- }
- }
-
- wcss->wcss_q6_bcr_reset = devm_reset_control_get_exclusive(dev, "wcss_q6_bcr_reset");
- if (IS_ERR(wcss->wcss_q6_bcr_reset)) {
- dev_err(wcss->dev, "unable to acquire wcss_q6_bcr_reset\n");
- return PTR_ERR(wcss->wcss_q6_bcr_reset);
+ wcss->wcss_q6_reset = devm_reset_control_get_exclusive(dev, "wcss_q6_reset");
+ if (IS_ERR(wcss->wcss_q6_reset)) {
+ dev_err(wcss->dev, "unable to acquire wcss_q6_reset\n");
+ return PTR_ERR(wcss->wcss_q6_reset);
}
return 0;
@@ -1066,7 +1056,6 @@ static const struct wcss_data wcss_ipq8074_res_init = {
.firmware_name = "IPQ8074/q6_fw.mdt",
.crash_reason_smem = WCSS_CRASH_REASON,
.aon_reset_required = true,
- .wcss_q6_reset_required = true,
.ops = &q6v5_wcss_ipq8074_ops,
.requires_force_stop = true,
};
@@ -1076,7 +1065,6 @@ static const struct wcss_data wcss_qcs404_res_init = {
.firmware_name = "wcnss.mdt",
.version = WCSS_QCS404,
.aon_reset_required = false,
- .wcss_q6_reset_required = false,
.ssr_name = "mpss",
.sysmon_name = "wcnss",
.ssctl_id = 0x12,
--
2.45.1
next prev parent reply other threads:[~2025-12-02 16:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-02 16:26 [PATCH v2 1/2] remoteproc: qcom_q6v5_wcss: fix parsing of qcom,halt-regs Alexandru Gagniuc
2025-12-02 16:26 ` Alexandru Gagniuc [this message]
2025-12-03 12:09 ` [PATCH v2 2/2] remoteproc: qcom_q6v5_wcss: drop redundant wcss_q6_bcr_reset Konrad Dybcio
2025-12-03 11:24 ` [PATCH v2 1/2] remoteproc: qcom_q6v5_wcss: fix parsing of qcom,halt-regs Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251202162626.1135615-2-mr.nuke.me@gmail.com \
--to=mr.nuke.me@gmail.com \
--cc=andersson@kernel.org \
--cc=govinds@codeaurora.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=quic_gokulsri@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox