[PATCH V3 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS

[Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>]

Enable UFS for HAMOA-IOT-EVK board.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index 88e3e7bed998..23cd913b05f5 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -1253,6 +1253,24 @@ &uart21 {
 	status = "okay";
 };
 
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l2i_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
 &usb_1_ss0_dwc3_hs {
 	remote-endpoint = <&pmic_glink_ss0_hs_in>;
 };
-- 
2.34.1