[PATCH v2] arm64: dts: qcom: sm8550: Add UART15

[Aaron Kling via B4 Relay <devnull+webgeek1234.gmail.com@kernel.org>]

From: Xilin Wu <wuxilin123@gmail.com>

Add uart15 node for UART bus present on sm8550 SoC.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
This patch was originally submitted as part of a series to support the
AYN Odin 2 [0]. That series stalled, so submitting separately.

[0] https://lore.kernel.org/all/20240424-ayn-odin2-initial-v1-0-e0aa05c991fd@gmail.com/
---
Changes in v2:
- Use QCOM_ICC_TAG_ define in interconnect paths phandle third argument
- Link to v1: https://lore.kernel.org/r/20260207-sm8550-uart15-v1-1-d8ccf746d102@gmail.com
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index e3f93f4f412ded9583a6bc9215185a0daf5f1b57..a54f375f7f041a193a4396e4aa911abb42e3e6dc 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1251,6 +1251,22 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x89c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart15_default>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
 		};
 
 		i2c_master_hub_0: geniqup@9c0000 {
@@ -5095,6 +5111,14 @@ qup_uart14_cts_rts: qup-uart14-cts-rts-state {
 				bias-pull-down;
 			};
 
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio74", "gpio75";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			sdc2_sleep: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";

---
base-commit: 9845cf73f7db6094c0d8419d6adb848028f4a921
change-id: 20260207-sm8550-uart15-9b7bd48e747d

Best regards,
-- 
Aaron Kling <webgeek1234@gmail.com>