[PATCH 0/6] SM6115/SM6125 MDSS core reset

[PATCH 0/6] SM6115/SM6125 MDSS core reset

[Val Packett]

Hi,

this series is like [1] but for these two SoCs.

Yeah: same person, different SoCs, same cause, different symptoms :)
On the SC7180 WoA device with DP out, it was causing faults+artifacts
due to EFI framebuffer scanout not stopping when Linux takes over. 
This time, the reset was necessary for MIPI DSI display to work *at all*
on the sm6115-motorola-guamp (Moto G9 Play) phone (DTS coming very soon!)

With the state left by the bootloader, the display would stay gray. DCS
setup commands would go through fine, some `dsi_err_worker: status=4`
errors would be logged after setup a few times (not continuously) but
the display would not start working. With the reset, it works fine!

Since the SM6125 is closely related, I've done the same for it as well.
The QCM2290 already does have the reset.

[1]: https://lore.kernel.org/all/20260120-topic-7180_dispcc_bcr-v1-0-0b1b442156c3@oss.qualcomm.com/

Thanks,
~val

Val Packett (6):
  dt-bindings: clock: qcom,sm6115-dispcc: Define MDSS resets
  dt-bindings: clock: qcom,dispcc-sm6125: Define MDSS resets
  clk: qcom: dispcc-sm6115: Add missing MDSS resets
  clk: qcom: dispcc-sm6125: Add missing MDSS resets
  arm64: dts: qcom: sm6115: Add missing MDSS core reset
  arm64: dts: qcom: sm6125: Add missing MDSS core reset

 arch/arm64/boot/dts/qcom/sm6115.dtsi           | 2 ++
 arch/arm64/boot/dts/qcom/sm6125.dtsi           | 3 +++
 drivers/clk/qcom/dispcc-sm6115.c               | 7 +++++++
 drivers/clk/qcom/dispcc-sm6125.c               | 7 +++++++
 include/dt-bindings/clock/qcom,dispcc-sm6125.h | 6 +++++-
 include/dt-bindings/clock/qcom,sm6115-dispcc.h | 7 +++++--
 6 files changed, 29 insertions(+), 3 deletions(-)

-- 
2.52.0

[PATCH 1/6] dt-bindings: clock: qcom,sm6115-dispcc: Define MDSS resets

[Val Packett]

Add the missing defines for MDSS resets.
While here, align comment style with other SoCs.

Fixes: 38557c6fc077 ("dt-bindings: clock: add QCOM SM6115 display clock bindings")
Signed-off-by: Val Packett <val@packett.cool>
---
 include/dt-bindings/clock/qcom,sm6115-dispcc.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/include/dt-bindings/clock/qcom,sm6115-dispcc.h b/include/dt-bindings/clock/qcom,sm6115-dispcc.h
index d1a6c45b5029..ab8d312ade37 100644
--- a/include/dt-bindings/clock/qcom,sm6115-dispcc.h
+++ b/include/dt-bindings/clock/qcom,sm6115-dispcc.h
@@ -6,7 +6,7 @@
 #ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
 #define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
 
-/* DISP_CC clocks */
+/* Clocks */
 #define DISP_CC_PLL0			0
 #define DISP_CC_PLL0_OUT_MAIN		1
 #define DISP_CC_MDSS_AHB_CLK		2
@@ -30,7 +30,10 @@
 #define DISP_CC_SLEEP_CLK		20
 #define DISP_CC_SLEEP_CLK_SRC		21
 
-/* DISP_CC GDSCR */
+/* Resets */
+#define DISP_CC_MDSS_CORE_BCR			0
+
+/* GDSCs */
 #define MDSS_GDSC			0
 
 #endif
-- 
2.52.0

[PATCH 2/6] dt-bindings: clock: qcom,dispcc-sm6125: Define MDSS resets

[Val Packett]

Add the missing defines for MDSS resets.
While here, align comment style with other SoCs.

Fixes: 8397c9c0c26b ("dt-bindings: clock: add QCOM SM6125 display clock bindings")
Signed-off-by: Val Packett <val@packett.cool>
---
 include/dt-bindings/clock/qcom,dispcc-sm6125.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/include/dt-bindings/clock/qcom,dispcc-sm6125.h b/include/dt-bindings/clock/qcom,dispcc-sm6125.h
index 4ff974f4fcc3..f58b85d2c814 100644
--- a/include/dt-bindings/clock/qcom,dispcc-sm6125.h
+++ b/include/dt-bindings/clock/qcom,dispcc-sm6125.h
@@ -6,6 +6,7 @@
 #ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6125_H
 #define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6125_H
 
+/* Clocks */
 #define DISP_CC_PLL0			0
 #define DISP_CC_MDSS_AHB_CLK		1
 #define DISP_CC_MDSS_AHB_CLK_SRC	2
@@ -35,7 +36,10 @@
 #define DISP_CC_MDSS_VSYNC_CLK_SRC	26
 #define DISP_CC_XO_CLK			27
 
-/* DISP_CC GDSCR */
+/* Resets */
+#define DISP_CC_MDSS_CORE_BCR			0
+
+/* GDSCs */
 #define MDSS_GDSC			0
 
 #endif
-- 
2.52.0

[PATCH 3/6] clk: qcom: dispcc-sm6115: Add missing MDSS resets

[Val Packett]

The MDSS resets were left undescribed, fix that.

Fixes: 9b518788631c ("clk: qcom: Add display clock controller driver for SM6115")
Signed-off-by: Val Packett <val@packett.cool>
---
 drivers/clk/qcom/dispcc-sm6115.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/qcom/dispcc-sm6115.c b/drivers/clk/qcom/dispcc-sm6115.c
index 8ae25d51db94..75bd57213079 100644
--- a/drivers/clk/qcom/dispcc-sm6115.c
+++ b/drivers/clk/qcom/dispcc-sm6115.c
@@ -22,6 +22,7 @@
 #include "clk-regmap-divider.h"
 #include "common.h"
 #include "gdsc.h"
+#include "reset.h"
 
 enum {
 	DT_BI_TCXO,
@@ -511,6 +512,10 @@ static struct clk_branch disp_cc_sleep_clk = {
 	},
 };
 
+static const struct qcom_reset_map disp_cc_sm6115_resets[] = {
+	[DISP_CC_MDSS_CORE_BCR] = { 0x2000 },
+};
+
 static struct gdsc mdss_gdsc = {
 	.gdscr = 0x3000,
 	.pd = {
@@ -561,6 +566,8 @@ static const struct qcom_cc_desc disp_cc_sm6115_desc = {
 	.config = &disp_cc_sm6115_regmap_config,
 	.clks = disp_cc_sm6115_clocks,
 	.num_clks = ARRAY_SIZE(disp_cc_sm6115_clocks),
+	.resets = disp_cc_sm6115_resets,
+	.num_resets = ARRAY_SIZE(disp_cc_sm6115_resets),
 	.gdscs = disp_cc_sm6115_gdscs,
 	.num_gdscs = ARRAY_SIZE(disp_cc_sm6115_gdscs),
 };
-- 
2.52.0

[PATCH 4/6] clk: qcom: dispcc-sm6125: Add missing MDSS resets

[Val Packett]

The MDSS resets were left undescribed, fix that.

Fixes: 6e87c8f07407 ("clk: qcom: Add display clock controller driver for SM6125")
Signed-off-by: Val Packett <val@packett.cool>
---
 drivers/clk/qcom/dispcc-sm6125.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/qcom/dispcc-sm6125.c b/drivers/clk/qcom/dispcc-sm6125.c
index 851d38a487d3..2c67abcfef12 100644
--- a/drivers/clk/qcom/dispcc-sm6125.c
+++ b/drivers/clk/qcom/dispcc-sm6125.c
@@ -17,6 +17,7 @@
 #include "clk-regmap.h"
 #include "common.h"
 #include "gdsc.h"
+#include "reset.h"
 
 enum {
 	P_BI_TCXO,
@@ -607,6 +608,10 @@ static struct clk_branch disp_cc_xo_clk = {
 	},
 };
 
+static const struct qcom_reset_map disp_cc_sm6125_resets[] = {
+	[DISP_CC_MDSS_CORE_BCR] = { 0x2000 },
+};
+
 static struct gdsc mdss_gdsc = {
 	.gdscr = 0x3000,
 	.pd = {
@@ -663,6 +668,8 @@ static const struct qcom_cc_desc disp_cc_sm6125_desc = {
 	.config = &disp_cc_sm6125_regmap_config,
 	.clks = disp_cc_sm6125_clocks,
 	.num_clks = ARRAY_SIZE(disp_cc_sm6125_clocks),
+	.resets = disp_cc_sm6125_resets,
+	.num_resets = ARRAY_SIZE(disp_cc_sm6125_resets),
 	.gdscs = disp_cc_sm6125_gdscs,
 	.num_gdscs = ARRAY_SIZE(disp_cc_sm6125_gdscs),
 };
-- 
2.52.0

[PATCH 5/6] arm64: dts: qcom: sm6115: Add missing MDSS core reset

[Val Packett]

To make sure the display subsystem starts in a predictable state, we
need to reset it. Otherwise, unpredictable issues can happen, e.g.
on the motorola-guamp smartphone DSI would not transmit anything.

Wire up the reset to fix.

Fixes: 705e50427d81 ("arm64: dts: qcom: sm6115: Add mdss/dpu node")
Signed-off-by: Val Packett <val@packett.cool>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index e9336adbc391..3a9a1ad8d581 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1864,6 +1864,8 @@ mdss: display-subsystem@5e00000 {
 				 <&gcc GCC_DISP_HF_AXI_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
 			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
-- 
2.52.0

[PATCH 6/6] arm64: dts: qcom: sm6125: Add missing MDSS core reset

[Val Packett]

To make sure the display subsystem starts in a predictable state, we
need to reset it. On closely related SoC (sm6115) this has caused
DSI displays to not work.

Wire up the reset to fix.

Fixes: 0865d23a0226 ("arm64: dts: qcom: sm6125: Add display hardware nodes")
Signed-off-by: Val Packett <val@packett.cool>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 80c42dff5399..a22374e5a17f 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -1238,6 +1238,8 @@ mdss: display-subsystem@5e00000 {
 				      "ahb",
 				      "core";
 
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
 			power-domains = <&dispcc MDSS_GDSC>;
 
 			iommus = <&apps_smmu 0x400 0x0>;
@@ -1437,6 +1439,7 @@ dispcc: clock-controller@5f00000 {
 			power-domains = <&rpmpd RPMPD_VDDCX>;
 
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 		};
 
-- 
2.52.0

Re: [PATCH 3/6] clk: qcom: dispcc-sm6115: Add missing MDSS resets

[Dmitry Baryshkov]

On Mon, Feb 16, 2026 at 08:25:21PM -0300, Val Packett wrote:
> The MDSS resets were left undescribed, fix that.
> 
> Fixes: 9b518788631c ("clk: qcom: Add display clock controller driver for SM6115")
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  drivers/clk/qcom/dispcc-sm6115.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH 4/6] clk: qcom: dispcc-sm6125: Add missing MDSS resets

[Dmitry Baryshkov]

On Mon, Feb 16, 2026 at 08:25:22PM -0300, Val Packett wrote:
> The MDSS resets were left undescribed, fix that.
> 
> Fixes: 6e87c8f07407 ("clk: qcom: Add display clock controller driver for SM6125")
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  drivers/clk/qcom/dispcc-sm6125.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH 5/6] arm64: dts: qcom: sm6115: Add missing MDSS core reset

[Dmitry Baryshkov]

On Mon, Feb 16, 2026 at 08:25:23PM -0300, Val Packett wrote:
> To make sure the display subsystem starts in a predictable state, we
> need to reset it. Otherwise, unpredictable issues can happen, e.g.
> on the motorola-guamp smartphone DSI would not transmit anything.
> 
> Wire up the reset to fix.
> 
> Fixes: 705e50427d81 ("arm64: dts: qcom: sm6115: Add mdss/dpu node")
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH 6/6] arm64: dts: qcom: sm6125: Add missing MDSS core reset

[Dmitry Baryshkov]

On Mon, Feb 16, 2026 at 08:25:24PM -0300, Val Packett wrote:
> To make sure the display subsystem starts in a predictable state, we
> need to reset it. On closely related SoC (sm6115) this has caused
> DSI displays to not work.
> 
> Wire up the reset to fix.
> 
> Fixes: 0865d23a0226 ("arm64: dts: qcom: sm6125: Add display hardware nodes")
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  arch/arm64/boot/dts/qcom/sm6125.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH 1/6] dt-bindings: clock: qcom,sm6115-dispcc: Define MDSS resets

[Krzysztof Kozlowski]

On Mon, Feb 16, 2026 at 08:25:19PM -0300, Val Packett wrote:
> Add the missing defines for MDSS resets.
> While here, align comment style with other SoCs.
> 
> Fixes: 38557c6fc077 ("dt-bindings: clock: add QCOM SM6115 display clock bindings")

Not a fix or explain the impact of the bug.

> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  include/dt-bindings/clock/qcom,sm6115-dispcc.h | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)

Best regards,
Krzysztof

Re: [PATCH 4/6] clk: qcom: dispcc-sm6125: Add missing MDSS resets

[Krzysztof Kozlowski]

On Mon, Feb 16, 2026 at 08:25:22PM -0300, Val Packett wrote:
> The MDSS resets were left undescribed, fix that.

Fix what? It is perfectly fine to have things "undescribed". Explain
what is the problem of these being missing.

> 
> Fixes: 6e87c8f07407 ("clk: qcom: Add display clock controller driver for SM6125")
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  drivers/clk/qcom/dispcc-sm6125.c | 7 +++++++
>  1 file changed, 7 insertions(+)

Best regards,
Krzysztof

Re: [PATCH 3/6] clk: qcom: dispcc-sm6115: Add missing MDSS resets

[Konrad Dybcio]

On 2/17/26 12:25 AM, Val Packett wrote:
> The MDSS resets were left undescribed, fix that.
> 
> Fixes: 9b518788631c ("clk: qcom: Add display clock controller driver for SM6115")
> Signed-off-by: Val Packett <val@packett.cool>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 4/6] clk: qcom: dispcc-sm6125: Add missing MDSS resets

[Konrad Dybcio]

On 2/17/26 12:25 AM, Val Packett wrote:
> The MDSS resets were left undescribed, fix that.
> 
> Fixes: 6e87c8f07407 ("clk: qcom: Add display clock controller driver for SM6125")
> Signed-off-by: Val Packett <val@packett.cool>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 5/6] arm64: dts: qcom: sm6115: Add missing MDSS core reset

[Konrad Dybcio]

On 2/17/26 12:25 AM, Val Packett wrote:
> To make sure the display subsystem starts in a predictable state, we
> need to reset it. Otherwise, unpredictable issues can happen, e.g.
> on the motorola-guamp smartphone DSI would not transmit anything.
> 
> Wire up the reset to fix.
> 
> Fixes: 705e50427d81 ("arm64: dts: qcom: sm6115: Add mdss/dpu node")
> Signed-off-by: Val Packett <val@packett.cool>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 6/6] arm64: dts: qcom: sm6125: Add missing MDSS core reset

[Konrad Dybcio]

On 2/17/26 12:25 AM, Val Packett wrote:
> To make sure the display subsystem starts in a predictable state, we
> need to reset it. On closely related SoC (sm6115) this has caused
> DSI displays to not work.
> 
> Wire up the reset to fix.
> 
> Fixes: 0865d23a0226 ("arm64: dts: qcom: sm6125: Add display hardware nodes")
> Signed-off-by: Val Packett <val@packett.cool>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 6/6] arm64: dts: qcom: sm6125: Add missing MDSS core reset

[Yedaya Katsman]

On Mon, 16 Feb 2026 20:25:24 -0300, Val Packett wrote:
> To make sure the display subsystem starts in a predictable state, we
> need to reset it. On closely related SoC (sm6115) this has caused
> DSI displays to not work.
> 
> Wire up the reset to fix.
> 
> Fixes: 0865d23a0226 ("arm64: dts: qcom: sm6125: Add display hardware nodes")
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  arch/arm64/boot/dts/qcom/sm6125.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
Tested-By: Yedaya Katsman <yedaya.ka@gmail.com>

This makes a panel driver I'm testing work more reliably, right after boot
instead of some random time later.

Regards, Yedaya