* [PATCH v2 1/2] dt-bindings: arm: qcom: Add Vicharak Axon Pro
2026-10-30 7:44 [PATCH v2 0/2] arm64: dts: qcom: Add Vicharak Axon Pro Ajit Singh
@ 2026-10-30 7:44 ` Ajit Singh
2026-11-02 10:40 ` Krzysztof Kozlowski
2026-10-30 7:44 ` [PATCH v2 2/2] arm64: dts: qcom: lemans: " Ajit Singh
2026-11-08 20:19 ` (subset) [PATCH v2 0/2] arm64: dts: qcom: " Bjorn Andersson
2 siblings, 1 reply; 6+ messages in thread
From: Ajit Singh @ 2026-10-30 7:44 UTC (permalink / raw)
To: andersson
Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel, Ajit Singh
Add the compatible string for the Vicharak Axon Pro SBC based on
the Qualcomm QCS9075 platform.
Signed-off-by: Ajit Singh <blfizzyy@gmail.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ff8a35df7862..02c0ebc3668e 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -472,6 +472,7 @@ properties:
- qcom,lemans-evk
- qcom,qcs9100-ride
- qcom,qcs9100-ride-r3
+ - vicharak,axon-pro
- const: qcom,qcs9100
- const: qcom,sa8775p
--
2.50.1 (Apple Git-155)
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Add Vicharak Axon Pro
2026-10-30 7:44 ` [PATCH v2 1/2] dt-bindings: arm: " Ajit Singh
@ 2026-11-02 10:40 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2026-11-02 10:40 UTC (permalink / raw)
To: Ajit Singh
Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm,
devicetree, linux-kernel
On Fri, Oct 30, 2026 at 01:14:03PM +0530, Ajit Singh wrote:
> Add the compatible string for the Vicharak Axon Pro SBC based on
> the Qualcomm QCS9075 platform.
>
> Signed-off-by: Ajit Singh <blfizzyy@gmail.com>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] arm64: dts: qcom: lemans: Add Vicharak Axon Pro
2026-10-30 7:44 [PATCH v2 0/2] arm64: dts: qcom: Add Vicharak Axon Pro Ajit Singh
2026-10-30 7:44 ` [PATCH v2 1/2] dt-bindings: arm: " Ajit Singh
@ 2026-10-30 7:44 ` Ajit Singh
2026-11-02 15:26 ` Konrad Dybcio
2026-11-08 20:19 ` (subset) [PATCH v2 0/2] arm64: dts: qcom: " Bjorn Andersson
2 siblings, 1 reply; 6+ messages in thread
From: Ajit Singh @ 2026-10-30 7:44 UTC (permalink / raw)
To: andersson
Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel, Ajit Singh
Add initial device tree support for the Vicharak Axon Pro SBC based on
the Qualcomm QCS9075 SoC.
Enable the debug UART, UFS, USB 2.0 host, PCIe1 (NVMe), GPIO LEDs, GPU
and DSPs.
Signed-off-by: Ajit Singh <blfizzyy@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/lemans-vicharak-axon-pro.dts | 514 ++++++++++++++++++
2 files changed, 515 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/lemans-vicharak-axon-pro.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1c86e7e98f55..a5e0a17e4129 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -57,6 +57,7 @@ lemans-evk-el2-dtbs := lemans-evk.dtb lemans-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-el2.dtb
lemans-evk-ifp-mezzanine-dtbs := lemans-evk.dtb lemans-evk-ifp-mezzanine.dtbo
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-ifp-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM) += lemans-vicharak-axon-pro.dtb
dtb-$(CONFIG_ARCH_QCOM) += mahua-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += milos-fairphone-fp6.dtb
dtb-$(CONFIG_ARCH_QCOM) += milos-nothing-asteroids.dtb
diff --git a/arch/arm64/boot/dts/qcom/lemans-vicharak-axon-pro.dts b/arch/arm64/boot/dts/qcom/lemans-vicharak-axon-pro.dts
new file mode 100644
index 000000000000..1816770d24f6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-vicharak-axon-pro.dts
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026 Vicharak Computers Pvt. Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+/ {
+ model = "Vicharak Axon Pro";
+ compatible = "vicharak,axon-pro", "qcom,qcs9100", "qcom,sa8775p";
+
+ aliases {
+ serial0 = &uart10;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&user_leds>;
+ pinctrl-names = "default";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "keep";
+ retain-state-suspended;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ retain-state-suspended;
+ };
+ };
+
+ vcc_5v0_sys: regulator-vcc-5v-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v0_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ regulator-vcc-5v0-usb2-en {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v0_usb2_en";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vcc_5v0_sys>;
+
+ gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_en>;
+ pinctrl-names = "default";
+
+ regulator-always-on;
+ };
+
+ vcc_pcie1_en: regulator-vcc-pcie1-en {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_pcie1_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_5v0_sys>;
+
+ gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&pcie1_en>;
+ pinctrl-names = "default";
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1816000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+ /* Powers boot/reset straps and always-active level shifters. */
+ regulator-always-on;
+ };
+
+ vreg_s5a: smps5 {
+ regulator-name = "vreg_s5a";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1996000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9a: smps9 {
+ regulator-name = "vreg_s9a";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c: ldo5 {
+ regulator-name = "vreg_l5c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vreg_l6e: ldo6 {
+ regulator-name = "vreg_l6e";
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8e: ldo8 {
+ regulator-name = "vreg_l8e";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4e: smps4 {
+ regulator-name = "vreg_s4e";
+ regulator-min-microvolt = <970000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s7e: smps7 {
+ regulator-name = "vreg_s7e";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9e: smps9 {
+ regulator-name = "vreg_s9e";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <570000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/sa8775p/a663_zap.mbn";
+};
+
+&iris {
+ firmware-name = "qcom/vpu/vpu30_p4_s6.mbn";
+
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ vddpe-3v3-supply = <&vcc_pcie1_en>;
+
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&pmm8654au_0_pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8775p/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp0 {
+ firmware-name = "qcom/sa8775p/cdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp1 {
+ firmware-name = "qcom/sa8775p/cdsp1.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+ firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+ firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32768>;
+};
+
+&tlmm {
+ pcie1_default_state: pcie1-default-state {
+ clkreq-pins {
+ pins = "gpio3";
+ function = "pcie1_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_en: pcie1-en-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_en: usb2-en-state {
+ pins = "gpio76";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ user_leds: user-led-state {
+ pins = "gpio16", "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart10 {
+ compatible = "qcom,geni-debug-uart";
+ pinctrl-0 = <&qup_uart10_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l8a>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l4c>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ /* Routed to an onboard USB hub for two USB-A host ports. */
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
--
2.50.1 (Apple Git-155)
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2 2/2] arm64: dts: qcom: lemans: Add Vicharak Axon Pro
2026-10-30 7:44 ` [PATCH v2 2/2] arm64: dts: qcom: lemans: " Ajit Singh
@ 2026-11-02 15:26 ` Konrad Dybcio
0 siblings, 0 replies; 6+ messages in thread
From: Konrad Dybcio @ 2026-11-02 15:26 UTC (permalink / raw)
To: Ajit Singh, andersson
Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel
On 10/30/26 8:44 AM, Ajit Singh wrote:
> Add initial device tree support for the Vicharak Axon Pro SBC based on
> the Qualcomm QCS9075 SoC.
>
> Enable the debug UART, UFS, USB 2.0 host, PCIe1 (NVMe), GPIO LEDs, GPU
> and DSPs.
>
> Signed-off-by: Ajit Singh <blfizzyy@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: (subset) [PATCH v2 0/2] arm64: dts: qcom: Add Vicharak Axon Pro
2026-10-30 7:44 [PATCH v2 0/2] arm64: dts: qcom: Add Vicharak Axon Pro Ajit Singh
2026-10-30 7:44 ` [PATCH v2 1/2] dt-bindings: arm: " Ajit Singh
2026-10-30 7:44 ` [PATCH v2 2/2] arm64: dts: qcom: lemans: " Ajit Singh
@ 2026-11-08 20:19 ` Bjorn Andersson
2 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2026-11-08 20:19 UTC (permalink / raw)
To: Ajit Singh
Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel
On Fri, 30 Oct 2026 13:14:02 +0530, Ajit Singh wrote:
> Add initial devicetree support for the Vicharak Axon Pro SBC, based on
> the Qualcomm QCS9075 platform.
>
> The board description includes the debug UART, UFS, USB 2.0 host with
> an onboard hub, PCIe1 (NVMe), GPIO LEDs, GPU and DSPs.
>
> Changes in v2:
> - Use the "lemans" subject prefix and name the SoC as QCS9075.
> - Drop the PMIC gpio-line-names, which did not match this board.
> - Drop Ethernet and audio to keep this to initial support. They will be
> sent separately.
> - Link to v1: https://lore.kernel.org/linux-arm-msm/20261029133654.6585-1-blfizzyy@gmail.com/
>
> [...]
Applied, thanks!
[1/2] dt-bindings: arm: qcom: Add Vicharak Axon Pro
commit: a917cf9dc0e9d9f8aa40f4aef5ce5fc008acbf11
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 6+ messages in thread