[PATCH v2 0/5] ARM: dts: qcom: adhere to pinctrl dt schema

[PATCH v2 0/5] ARM: dts: qcom: adhere to pinctrl dt schema

[Rayyan Ansari]

Hi,
The following patches make the device trees compliant with the pinctrl
text to dt schema conversion here:
https://lore.kernel.org/all/20240709162009.5166-1-rayyan.ansari@linaro.org/

v1: https://lore.kernel.org/all/20240710084250.11342-1-rayyan.ansari@linaro.org/

Thanks,
Rayyan

Rayyan Ansari (5):
  ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
  ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in
    i2c nodes
  ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
  ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
  ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema

 .../dts/qcom/qcom-apq8064-asus-nexus7-flo.dts |   4 -
 .../boot/dts/qcom/qcom-apq8064-cm-qs600.dts   |  25 +-
 .../boot/dts/qcom/qcom-apq8064-ifc6410.dts    |  25 +-
 arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi | 362 +++++++-----------
 .../qcom-apq8064-sony-xperia-lagan-yuga.dts   |  10 +-
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi      |  34 +-
 .../boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi |  34 +-
 .../boot/dts/qcom/qcom-ipq4018-jalapeno.dts   |  27 +-
 .../boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi |  26 +-
 .../boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi |  14 +-
 .../dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts    |   8 +-
 .../dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts    |   2 +-
 .../boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi |   6 +-
 arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts |  11 +-
 .../arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts |  76 ++--
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi      | 114 +++---
 16 files changed, 309 insertions(+), 469 deletions(-)

-- 
2.45.2

[PATCH v2 1/5] ARM: dts: qcom: apq8064-pins: correct error in drive-strength property

[Rayyan Ansari]

The "drive-strength" property was incorrectly spelt as "drive-strengh".
Correct this.

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
---
v1 -> v2: split from main apq8064 patch

 arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
index 7c545c50847b..107fc19f1331 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
@@ -11,19 +11,19 @@ pios {
 	sdcc1_pins: sdcc1-pin-active {
 		clk {
 			pins = "sdc1_clk";
-			drive-strengh = <16>;
+			drive-strength = <16>;
 			bias-disable;
 		};
 
 		cmd {
 			pins = "sdc1_cmd";
-			drive-strengh = <10>;
+			drive-strength = <10>;
 			bias-pull-up;
 		};
 
 		data {
 			pins = "sdc1_data";
-			drive-strengh = <10>;
+			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
@@ -31,19 +31,19 @@ data {
 	sdcc3_pins: sdcc3-pin-active {
 		clk {
 			pins = "sdc3_clk";
-			drive-strengh = <8>;
+			drive-strength = <8>;
 			bias-disable;
 		};
 
 		cmd {
 			pins = "sdc3_cmd";
-			drive-strengh = <8>;
+			drive-strength = <8>;
 			bias-pull-up;
 		};
 
 		data {
 			pins = "sdc3_data";
-			drive-strengh = <8>;
+			drive-strength = <8>;
 			bias-pull-up;
 		};
 	};
-- 
2.45.2

Re: [PATCH v2 1/5] ARM: dts: qcom: apq8064-pins: correct error in drive-strength property

[Konrad Dybcio]

On 11.07.2024 1:01 PM, Rayyan Ansari wrote:
> The "drive-strength" property was incorrectly spelt as "drive-strengh".
> Correct this.
> 
> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH v2 1/5] ARM: dts: qcom: apq8064-pins: correct error in drive-strength property

[Krzysztof Kozlowski]

On 11/07/2024 13:01, Rayyan Ansari wrote:
> The "drive-strength" property was incorrectly spelt as "drive-strengh".
> Correct this.
> 
> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v2 2/5] ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes

[Rayyan Ansari]

Remove duplicate handle to i2c pins in the device tree, as they are
already set in qcom-apq8064.dtsi.

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
---
v1 -> v2: split from main apq8064 patch 

 arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index d460743fbb94..947183992850 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -125,8 +125,6 @@ &gsbi1 {
 &gsbi1_i2c {
 	status = "okay";
 	clock-frequency = <200000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
 
 	eeprom@52 {
 		compatible = "atmel,24c128";
@@ -148,8 +146,6 @@ &gsbi3 {
 
 &gsbi3_i2c {
 	clock-frequency = <200000>;
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
 	status = "okay";
 
 	trackpad@10 {
-- 
2.45.2

Re: [PATCH v2 2/5] ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes

[Konrad Dybcio]

On 11.07.2024 1:01 PM, Rayyan Ansari wrote:
> Remove duplicate handle to i2c pins in the device tree, as they are
> already set in qcom-apq8064.dtsi.
> 
> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
> ---

The difference here is that the SoC DTSI also has sleep mode

but I suppose that's only a gain

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

Re: [PATCH v2 2/5] ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes

[Krzysztof Kozlowski]

On 11/07/2024 13:01, Rayyan Ansari wrote:
> Remove duplicate handle to i2c pins in the device tree, as they are
> already set in qcom-apq8064.dtsi.
> 
> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v2 3/5] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema

[Rayyan Ansari]

Pass dtbs_check for qcom,apq8064-pinctrl.yaml.

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
---
v1 -> v2: split previous 2 commits from this patch, corrected commit message

 .../boot/dts/qcom/qcom-apq8064-cm-qs600.dts   |  25 +-
 .../boot/dts/qcom/qcom-apq8064-ifc6410.dts    |  25 +-
 arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi | 350 +++++++-----------
 .../qcom-apq8064-sony-xperia-lagan-yuga.dts   |  10 +-
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi      |  34 +-
 5 files changed, 166 insertions(+), 278 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index 671d58cc2741..178c55c1efeb 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -188,24 +188,17 @@ &sdcc4 {
 };
 
 &tlmm_pinmux {
-	card_detect: card_detect {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			bias-disable;
-		};
+	card_detect: card-detect-state {
+		pins = "gpio26";
+		function = "gpio";
+		bias-disable;
 	};
 
-	pcie_pins: pcie_pinmux {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-		};
-		conf {
-			pins = "gpio27";
-			drive-strength = <12>;
-			bias-disable;
-		};
+	pcie_pins: pcie-state {
+		pins = "gpio27";
+		function = "gpio";
+		drive-strength = <12>;
+		bias-disable;
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index ed86b24119c9..b3ff8010b149 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -321,24 +321,17 @@ &sdcc4 {
 };
 
 &tlmm_pinmux {
-	card_detect: card_detect {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			bias-disable;
-		};
+	card_detect: card-detect-state {
+		pins = "gpio26";
+		function = "gpio";
+		bias-disable;
 	};
 
-	pcie_pins: pcie_pinmux {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-		};
-		conf {
-			pins = "gpio27";
-			drive-strength = <12>;
-			bias-disable;
-		};
+	pcie_pins: pcie-state {
+		pins = "gpio27";
+		function = "gpio";
+		drive-strength = <12>;
+		bias-disable;
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
index 107fc19f1331..e53de709e9d1 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
@@ -1,318 +1,218 @@
 // SPDX-License-Identifier: GPL-2.0
 
 &tlmm_pinmux {
-	sdc4_gpios: sdc4-gpios {
-		pios {
-			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-			function = "sdc4";
-		};
-	};
-
-	sdcc1_pins: sdcc1-pin-active {
-		clk {
+	sdcc1_default_state: sdcc1-default-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc1_cmd";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdcc3_pins: sdcc3-pin-active {
-		clk {
+	sdcc3_default_state: sdcc3-default-state {
+		clk-pins {
 			pins = "sdc3_clk";
 			drive-strength = <8>;
 			bias-disable;
 		};
 
-		cmd {
+		cmd-pins {
 			pins = "sdc3_cmd";
 			drive-strength = <8>;
 			bias-pull-up;
 		};
 
-		data {
+		data-pins {
 			pins = "sdc3_data";
 			drive-strength = <8>;
 			bias-pull-up;
 		};
 	};
 
-	ps_hold: ps_hold {
-		mux {
-			pins = "gpio78";
-			function = "ps_hold";
-		};
+	sdc4_default_state: sdc4-default-state {
+		pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+		function = "sdc4";
 	};
 
-	i2c1_pins: i2c1 {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gsbi1";
-		};
+	gsbi1_uart_2pins: gsbi1-uart-2pins-state {
+		pins = "gpio18", "gpio19";
+		function = "gsbi1";
+	};
 
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	gsbi1_uart_4pins: gsbi1-uart-4pins-state {
+		pins = "gpio18", "gpio19", "gpio20", "gpio21";
+		function = "gsbi1";
 	};
 
-	i2c1_pins_sleep: i2c1_pins_sleep {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21";
+	gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
+		rx-pins {
+			pins = "gpio11";
+			function = "gsbi4";
 			drive-strength = <2>;
 			bias-disable;
 		};
-	};
 
-	gsbi1_uart_2pins: gsbi1_uart_2pins {
-		mux {
-			pins = "gpio18", "gpio19";
-			function = "gsbi1";
+		tx-pins {
+			pins = "gpio10";
+			function = "gsbi4";
+			drive-strength = <4>;
+			bias-disable;
 		};
 	};
 
-	gsbi1_uart_4pins: gsbi1_uart_4pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio20", "gpio21";
-			function = "gsbi1";
-		};
+	gsbi6_uart_2pins: gsbi6-uart-2pins-state {
+		pins = "gpio14", "gpio15";
+		function = "gsbi6";
 	};
 
-	i2c2_pins: i2c2 {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gsbi2";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	gsbi6_uart_4pins: gsbi6-uart-4pins-state {
+		pins = "gpio14", "gpio15", "gpio16", "gpio17";
+		function = "gsbi6";
 	};
 
-	i2c2_pins_sleep: i2c2_pins_sleep {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	gsbi7_uart_2pins: gsbi7-uart-2pins-state {
+		pins = "gpio82", "gpio83";
+		function = "gsbi7";
 	};
 
-	i2c3_pins: i2c3 {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gsbi3";
-		};
-
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	gsbi7_uart_4pins: gsbi7_uart_4pins-state {
+		pins = "gpio82", "gpio83", "gpio84", "gpio85";
+		function = "gsbi7";
 	};
 
-	i2c3_pins_sleep: i2c3_pins_sleep {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	i2c1_default_state: i2c1-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gsbi1";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	i2c4_pins: i2c4 {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gsbi4";
-		};
-
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	i2c1_sleep_state: i2c1-sleep-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	i2c4_pins_sleep: i2c4_pins_sleep {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	i2c2_default_state: i2c2-default-state {
+		pins = "gpio24", "gpio25";
+		function = "gsbi2";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	spi5_default: spi5_default {
-		pinmux {
-			pins = "gpio51", "gpio52", "gpio54";
-			function = "gsbi5";
-		};
-
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio53";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio54";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		pinconf_cs {
-			pins = "gpio53";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
+	i2c2_sleep_state: i2c2-sleep-state {
+		pins = "gpio24", "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	spi5_sleep: spi5_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	i2c3_default_state: i2c3-default-state {
+		pins = "gpio8", "gpio9";
+		function = "gsbi3";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	i2c6_pins: i2c6 {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gsbi6";
-		};
-
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	i2c3_sleep_state: i2c3-sleep-state {
+		pins = "gpio8", "gpio9";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	i2c6_pins_sleep: i2c6_pins_sleep {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	i2c4_default_state: i2c4-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gsbi4";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
-		rx-pins {
-			pins = "gpio11";
-			function = "gsbi4";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		tx-pins {
-			pins = "gpio10";
-			function = "gsbi4";
-			drive-strength = <4>;
-			bias-disable;
-		};
+	i2c4_sleep_state: i2c4-sleep-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	gsbi6_uart_2pins: gsbi6_uart_2pins {
-		mux {
-			pins = "gpio14", "gpio15";
-			function = "gsbi6";
-		};
+	i2c6_default_state: i2c6-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gsbi6";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	gsbi6_uart_4pins: gsbi6_uart_4pins {
-		mux {
-			pins = "gpio14", "gpio15", "gpio16", "gpio17";
-			function = "gsbi6";
-		};
+	i2c6_sleep_state: i2c6-sleep-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	gsbi7_uart_2pins: gsbi7_uart_2pins {
-		mux {
-			pins = "gpio82", "gpio83";
-			function = "gsbi7";
-		};
+	i2c7_default_state: i2c7-default-state {
+		pins = "gpio84", "gpio85";
+		function = "gsbi7";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	gsbi7_uart_4pins: gsbi7_uart_4pins {
-		mux {
-			pins = "gpio82", "gpio83", "gpio84", "gpio85";
-			function = "gsbi7";
-		};
+	i2c7_sleep_state: i2c7-sleep-state {
+		pins = "gpio84", "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	i2c7_pins: i2c7 {
-		mux {
-			pins = "gpio84", "gpio85";
-			function = "gsbi7";
+	spi5_default_state: spi5-default-state {
+		spi5-pins {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+			drive-strength = <16>;
+			bias-disable;
 		};
 
-		pinconf {
-			pins = "gpio84", "gpio85";
+		spi5-cs-pins {
+			pins = "gpio53";
+			function = "gpio";
 			drive-strength = <16>;
 			bias-disable;
+			output-high;
 		};
 	};
 
-	i2c7_pins_sleep: i2c7_pins_sleep {
-		mux {
-			pins = "gpio84", "gpio85";
+	spi5_sleep_state: spi5-sleep-state {
+		spi5-pins {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
 			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio84", "gpio85";
 			drive-strength = <2>;
-			bias-disable;
+			bias-pull-down;
 		};
 	};
 
-	riva_fm_pin_a: riva-fm-active {
+	riva_fm_pin_a: riva-fm-active-state {
 		pins = "gpio14", "gpio15";
 		function = "riva_fm";
 	};
 
-	riva_bt_pin_a: riva-bt-active {
+	riva_bt_pin_a: riva-bt-active-state {
 		pins = "gpio16", "gpio17";
 		function = "riva_bt";
 	};
 
-	riva_wlan_pin_a: riva-wlan-active {
+	riva_wlan_pin_a: riva-wlan-active-state {
 		pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
 		function = "riva_wlan";
 
@@ -320,22 +220,24 @@ riva_wlan_pin_a: riva-wlan-active {
 		bias-pull-down;
 	};
 
-	hdmi_pinctrl: hdmi-pinctrl {
-		mux {
-			pins = "gpio70", "gpio71", "gpio72";
-			function = "hdmi";
-		};
-
-		pinconf_ddc {
+	hdmi_pinctrl: hdmi-pinctrl-state {
+		ddc-pins {
 			pins = "gpio70", "gpio71";
+			function = "hdmi";
 			bias-pull-up;
 			drive-strength = <2>;
 		};
 
-		pinconf_hpd {
+		hpd-pins {
 			pins = "gpio72";
+			function = "hdmi";
 			bias-pull-down;
 			drive-strength = <16>;
 		};
 	};
+
+	ps_hold_default_state: ps-hold-default-state {
+		pins = "gpio78";
+		function = "ps_hold";
+	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 2412aa3e3e8d..7752f07973f9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -373,21 +373,21 @@ &sdcc3 {
 	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+	pinctrl-0 = <&sdcc3_default_state>, <&sdcc3_cd_pin_a>;
 
 	status = "okay";
 };
 
 &tlmm_pinmux {
-	gsbi5_uart_pin_a: gsbi5-uart-pin-active {
-		rx {
+	gsbi5_uart_pin_a: gsbi5-uart-pin-active-state {
+		rx-pins {
 			pins = "gpio52";
 			function = "gsbi5";
 			drive-strength = <2>;
 			bias-pull-up;
 		};
 
-		tx {
+		tx-pins {
 			pins = "gpio51";
 			function = "gsbi5";
 			drive-strength = <4>;
@@ -396,7 +396,7 @@ tx {
 	};
 
 
-	sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+	sdcc3_cd_pin_a: sdcc3-cd-pin-active-state {
 		pins = "gpio26";
 		function = "gpio";
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 769e151747c3..00f273ffea9c 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -302,7 +302,7 @@ tlmm_pinmux: pinctrl@800000 {
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 
 			pinctrl-names = "default";
-			pinctrl-0 = <&ps_hold>;
+			pinctrl-0 = <&ps_hold_default_state>;
 		};
 
 		sfpb_wrapper_mutex: syscon@1200000 {
@@ -435,8 +435,8 @@ gsbi1_serial: serial@12450000 {
 
 			gsbi1_i2c: i2c@12460000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-1 = <&i2c1_pins_sleep>;
+				pinctrl-0 = <&i2c1_default_state>;
+				pinctrl-1 = <&i2c1_sleep_state>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x12460000 0x1000>;
 				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
@@ -465,8 +465,8 @@ gsbi2: gsbi@12480000 {
 			gsbi2_i2c: i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
-				pinctrl-0 = <&i2c2_pins>;
-				pinctrl-1 = <&i2c2_pins_sleep>;
+				pinctrl-0 = <&i2c2_default_state>;
+				pinctrl-1 = <&i2c2_sleep_state>;
 				pinctrl-names = "default", "sleep";
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
@@ -489,8 +489,8 @@ gsbi3: gsbi@16200000 {
 			ranges;
 			gsbi3_i2c: i2c@16280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-1 = <&i2c3_pins_sleep>;
+				pinctrl-0 = <&i2c3_default_state>;
+				pinctrl-1 = <&i2c3_sleep_state>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
@@ -528,8 +528,8 @@ gsbi4_serial: serial@16340000 {
 
 			gsbi4_i2c: i2c@16380000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-1 = <&i2c4_pins_sleep>;
+				pinctrl-0 = <&i2c4_default_state>;
+				pinctrl-1 = <&i2c4_sleep_state>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16380000 0x1000>;
 				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
@@ -565,8 +565,8 @@ gsbi5_spi: spi@1a280000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
 				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-0 = <&spi5_default>;
-				pinctrl-1 = <&spi5_sleep>;
+				pinctrl-0 = <&spi5_default_state>;
+				pinctrl-1 = <&spi5_sleep_state>;
 				pinctrl-names = "default", "sleep";
 				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
@@ -599,8 +599,8 @@ gsbi6_serial: serial@16540000 {
 
 			gsbi6_i2c: i2c@16580000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c6_pins>;
-				pinctrl-1 = <&i2c6_pins_sleep>;
+				pinctrl-0 = <&i2c6_default_state>;
+				pinctrl-1 = <&i2c6_sleep_state>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16580000 0x1000>;
 				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
@@ -635,8 +635,8 @@ gsbi7_serial: serial@16640000 {
 
 			gsbi7_i2c: i2c@16680000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c7_pins>;
-				pinctrl-1 = <&i2c7_pins_sleep>;
+				pinctrl-0 = <&i2c7_default_state>;
+				pinctrl-1 = <&i2c7_sleep_state>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16680000 0x1000>;
 				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
@@ -945,7 +945,7 @@ sdcc4: mmc@121c0000 {
 			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
 			dma-names = "tx", "rx";
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdc4_gpios>;
+			pinctrl-0 = <&sdc4_default_state>;
 		};
 
 		sdcc4bam: dma-controller@121c2000 {
@@ -962,7 +962,7 @@ sdcc1: mmc@12400000 {
 			status = "disabled";
 			compatible = "arm,pl18x", "arm,primecell";
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdcc1_pins>;
+			pinctrl-0 = <&sdcc1_default_state>;
 			arm,primecell-periphid = <0x00051180>;
 			reg = <0x12400000 0x2000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.45.2

Re: [PATCH v2 3/5] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema

[Krzysztof Kozlowski]

On 11/07/2024 13:01, Rayyan Ansari wrote:
> Pass dtbs_check for qcom,apq8064-pinctrl.yaml.
> 
> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
> ---
> v1 -> v2: split previous 2 commits from this patch, corrected commit message
> 
>  .../boot/dts/qcom/qcom-apq8064-cm-qs600.dts   |  25 +-
>  .../boot/dts/qcom/qcom-apq8064-ifc6410.dts    |  25 +-
>  arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi | 350 +++++++-----------
>  .../qcom-apq8064-sony-xperia-lagan-yuga.dts   |  10 +-
>  arch/arm/boot/dts/qcom/qcom-apq8064.dtsi      |  34 +-
>  5 files changed, 166 insertions(+), 278 deletions(-)
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v2 4/5] ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema

[Rayyan Ansari]

Pass dtbs_check for qcom,ipq8064-pinctrl.yaml.
Also remove invalid "bias-none" property, which I have assumed to mean
"bias-disable".

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v1 -> v2: corrected commit message, added r-b tag

 arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts |  11 +-
 .../arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts |  76 +++++-------
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi      | 114 ++++++++----------
 3 files changed, 87 insertions(+), 114 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
index a654d3c22c4f..5a8bf1a6f559 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
@@ -7,12 +7,11 @@ / {
 
 	soc {
 		pinmux@800000 {
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54", "gpio65";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
+			buttons_pins: buttons-state {
+				pins = "gpio54", "gpio65";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
index 12e806adcda8..f09da9460c86 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
@@ -404,59 +404,49 @@ main@800000 {
 };
 
 &qcom_pinmux {
-	buttons_pins: buttons_pins {
-		mux {
-			pins = "gpio66";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	buttons_pins: buttons-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	leds_pins: leds_pins {
-		mux {
-			pins = "gpio33";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	leds_pins: leds-state {
+		pins = "gpio33";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	mdio1_pins: mdio1_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
+	mdio1_pins: mdio1-state {
+		pins = "gpio10", "gpio11";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
 	};
 
-	sw0_reset_pin: sw0_reset_pin {
-		mux {
-			pins = "gpio16";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
+	sw0_reset_pin: sw0-reset-state {
+		pins = "gpio16";
+		drive-strength = <16>;
+		function = "gpio";
+		bias-disable;
+		input-disable;
 	};
 
-	sw1_reset_pin: sw1_reset_pin {
-		mux {
-			pins = "gpio17";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
+	sw1_reset_pin: sw1-reset-state {
+		pins = "gpio17";
+		drive-strength = <16>;
+		function = "gpio";
+		bias-disable;
+		input-disable;
 	};
 
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio4";
-			function = "gpio";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
+	usb1_pwr_en_pins: usb1-pwr-en-state {
+		pins = "gpio4";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-high;
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index da0fd75f4711..9adefc88c5b4 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -399,70 +399,58 @@ qcom_pinmux: pinmux@800000 {
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 
-			pcie0_pins: pcie0_pinmux {
-				mux {
-					pins = "gpio3";
-					function = "pcie1_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
+			pcie0_pins: pcie0-state {
+				pins = "gpio3";
+				function = "pcie1_rst";
+				drive-strength = <12>;
+				bias-disable;
 			};
 
-			pcie1_pins: pcie1_pinmux {
-				mux {
-					pins = "gpio48";
-					function = "pcie2_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
+			pcie1_pins: pcie1-state {
+				pins = "gpio48";
+				function = "pcie2_rst";
+				drive-strength = <12>;
+				bias-disable;
 			};
 
-			pcie2_pins: pcie2_pinmux {
-				mux {
-					pins = "gpio63";
-					function = "pcie3_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
+			pcie2_pins: pcie2-state {
+				pins = "gpio63";
+				function = "pcie3_rst";
+				drive-strength = <12>;
+				bias-disable;
 			};
 
-			i2c4_pins: i2c4-default {
+			i2c4_pins: i2c4-state {
 				pins = "gpio12", "gpio13";
 				function = "gsbi4";
 				drive-strength = <12>;
 				bias-disable;
 			};
 
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
-				};
+			spi_pins: spi-state {
+				pins = "gpio18", "gpio19", "gpio21";
+				function = "gsbi5";
+				drive-strength = <10>;
+				bias-disable;
 			};
 
-			leds_pins: leds_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9",
-					       "gpio26", "gpio53";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-					output-low;
-				};
+			leds_pins: leds-state {
+				pins = "gpio7", "gpio8", "gpio9",
+					"gpio26", "gpio53";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+				output-low;
 			};
 
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
+			buttons_pins: buttons-state {
+				pins = "gpio54";
+				drive-strength = <2>;
+				bias-pull-up;
 			};
 
-			nand_pins: nand_pins {
-				mux {
+			nand_pins: nand-state {
+				nand-pins {
 					pins = "gpio34", "gpio35", "gpio36",
 					       "gpio37", "gpio38", "gpio39",
 					       "gpio40", "gpio41", "gpio42",
@@ -473,14 +461,14 @@ mux {
 					bias-disable;
 				};
 
-				pullups {
+				nand-pullup-pins {
 					pins = "gpio39";
 					function = "nand";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 
-				hold {
+				nand-hold-pins {
 					pins = "gpio40", "gpio41", "gpio42",
 					       "gpio43", "gpio44", "gpio45",
 					       "gpio46", "gpio47";
@@ -490,25 +478,21 @@ hold {
 				};
 			};
 
-			mdio0_pins: mdio0-pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-disable;
-				};
+			mdio0_pins: mdio0-state {
+				pins = "gpio0", "gpio1";
+				function = "mdio";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
-			rgmii2_pins: rgmii2-pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29",
-					       "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59",
-					       "gpio60", "gpio61", "gpio62";
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
+			rgmii2_pins: rgmii2-state {
+				pins = "gpio27", "gpio28", "gpio29",
+					"gpio30", "gpio31", "gpio32",
+					"gpio51", "gpio52", "gpio59",
+					"gpio60", "gpio61", "gpio62";
+				function = "rgmii2";
+				drive-strength = <8>;
+				bias-disable;
 			};
 		};
 
-- 
2.45.2

[PATCH v2 5/5] ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema

[Rayyan Ansari]

Pass dtbs_check for qcom,ipq4019-pinctrl.yaml.

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v1 -> v2: corrected commit message, added r-b tag

 .../boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi | 34 ++++++++-----------
 .../boot/dts/qcom/qcom-ipq4018-jalapeno.dts   | 27 ++++++---------
 .../boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 26 +++++---------
 .../boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi | 14 ++++----
 .../dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts    |  8 ++---
 .../dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts    |  2 +-
 .../boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi |  6 ++--
 7 files changed, 50 insertions(+), 67 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index da67d55fa557..0d23c03fae33 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -28,46 +28,42 @@ key-reset {
 };
 
 &tlmm {
-	i2c0_pins: i2c0_pinmux {
-		mux_i2c {
-			function = "blsp_i2c0";
-			pins = "gpio58", "gpio59";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	i2c0_pins: i2c0-state {
+		function = "blsp_i2c0";
+		pins = "gpio58", "gpio59";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	mdio_pins: mdio_pinmux {
-		mux_mdio {
+	mdio_pins: mdio-state {
+		mdio-pins {
 			pins = "gpio53";
 			function = "mdio";
 			bias-pull-up;
 		};
 
-		mux_mdc {
+		mdc-pins {
 			pins = "gpio52";
 			function = "mdc";
 			bias-pull-up;
 		};
 	};
 
-	serial0_pins: serial0_pinmux {
-		mux_uart {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
+	serial0_pins: serial0-state {
+		pins = "gpio60", "gpio61";
+		function = "blsp_uart0";
+		bias-disable;
 	};
 
-	spi0_pins: spi0_pinmux {
-		mux_spi {
+	spi0_pins: spi0-state {
+		spi0-pins {
 			function = "blsp_spi0";
 			pins = "gpio55", "gpio56", "gpio57";
 			drive-strength = <12>;
 			bias-disable;
 		};
 
-		mux_cs {
+		spi0-cs-pins {
 			function = "gpio";
 			pins = "gpio54", "gpio4";
 			drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
index 365fbac417fd..ac3b30072a22 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
@@ -11,40 +11,35 @@ / {
 };
 
 &tlmm {
-	mdio_pins: mdio_pinmux {
-		pinmux_1 {
+	mdio_pins: mdio-state {
+		mdio-pins {
 			pins = "gpio53";
 			function = "mdio";
+			bias-pull-up;
 		};
 
-		pinmux_2 {
+		mdc-pins {
 			pins = "gpio52";
 			function = "mdc";
-		};
-
-		pinconf {
-			pins = "gpio52", "gpio53";
 			bias-pull-up;
 		};
 	};
 
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
+	serial_pins: serial-state{
+		pins = "gpio60", "gpio61";
+		function = "blsp_uart0";
+		bias-disable;
 	};
 
-	spi_0_pins: spi_0_pinmux {
-		pin {
+	spi_0_pins: spi-0-state {
+		spi0-pins {
 			function = "blsp_spi0";
 			pins = "gpio55", "gpio56", "gpio57";
 			drive-strength = <2>;
 			bias-disable;
 		};
 
-		pin_cs {
+		spi0-cs-pins {
 			function = "gpio";
 			pins = "gpio54", "gpio59";
 			drive-strength = <2>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index f7ac8f9d0b6f..efbe89dd4793 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -34,30 +34,22 @@ &prng {
 };
 
 &tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
+	serial_pins: serial-state {
+		pins = "gpio60", "gpio61";
+		function = "blsp_uart0";
+		bias-disable;
 	};
 
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio54";
-		};
-		pinconf {
+	spi_0_pins: spi-0-state {
+		spi0-pins {
 			pins = "gpio55", "gpio56", "gpio57";
+			function = "blsp_spi0";
 			drive-strength = <12>;
 			bias-disable;
 		};
-		pinconf_cs {
+		spi0-cs-pins {
 			pins = "gpio54";
+			function = "gpio";
 			drive-strength = <2>;
 			bias-disable;
 			output-high;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 374af6dd360a..91e296d2ea82 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -24,26 +24,26 @@ memory {
 
 	soc {
 		pinctrl@1000000 {
-			serial_0_pins: serial0-pinmux {
+			serial_0_pins: serial0-state {
 				pins = "gpio16", "gpio17";
 				function = "blsp_uart0";
 				bias-disable;
 			};
 
-			serial_1_pins: serial1-pinmux {
+			serial_1_pins: serial1-state {
 				pins = "gpio8", "gpio9",
 					"gpio10", "gpio11";
 				function = "blsp_uart1";
 				bias-disable;
 			};
 
-			spi_0_pins: spi-0-pinmux {
-				pinmux {
+			spi_0_pins: spi-0-state {
+				spi0-pins {
 					function = "blsp_spi0";
 					pins = "gpio13", "gpio14", "gpio15";
 					bias-disable;
 				};
-				pinmux_cs {
+				spi0-cs-pins {
 					function = "gpio";
 					pins = "gpio12";
 					bias-disable;
@@ -51,13 +51,13 @@ pinmux_cs {
 				};
 			};
 
-			i2c_0_pins: i2c-0-pinmux {
+			i2c_0_pins: i2c-0-state {
 				pins = "gpio20", "gpio21";
 				function = "blsp_i2c0";
 				bias-disable;
 			};
 
-			nand_pins: nand-pins {
+			nand_pins: nand-state {
 				pins = "gpio53", "gpio55", "gpio56",
 					"gpio57", "gpio58", "gpio59",
 					"gpio60", "gpio62", "gpio63",
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
index ea2987fcbff8..41c5874f6f97 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -19,20 +19,20 @@ spi@78b6000 {
 		};
 
 		pinctrl@1000000 {
-			serial_1_pins: serial1-pinmux {
+			serial_1_pins: serial1-state {
 				pins = "gpio8", "gpio9",
 					"gpio10", "gpio11";
 				function = "blsp_uart1";
 				bias-disable;
 			};
 
-			spi_0_pins: spi-0-pinmux {
-				pinmux {
+			spi_0_pins: spi-0-state {
+				spi0-pins {
 					function = "blsp_spi0";
 					pins = "gpio13", "gpio14", "gpio15";
 					bias-disable;
 				};
-				pinmux_cs {
+				spio-cs-pins {
 					function = "gpio";
 					pins = "gpio12";
 					bias-disable;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
index bd3553dd2070..67ee99d69757 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -9,7 +9,7 @@ / {
 
 	soc {
 		pinctrl@1000000 {
-			serial_1_pins: serial1-pinmux {
+			serial_1_pins: serial1-state {
 				pins = "gpio8", "gpio9";
 				function = "blsp_uart1";
 				bias-disable;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
index 7ef635997efa..cc88cf5f0d9b 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
@@ -24,19 +24,19 @@ chosen {
 
 	soc {
 		pinctrl@1000000 {
-			serial_0_pins: serial0-pinmux {
+			serial_0_pins: serial0-state {
 				pins = "gpio16", "gpio17";
 				function = "blsp_uart0";
 				bias-disable;
 			};
 
-			i2c_0_pins: i2c-0-pinmux {
+			i2c_0_pins: i2c-0-state {
 				pins = "gpio20", "gpio21";
 				function = "blsp_i2c0";
 				bias-disable;
 			};
 
-			nand_pins: nand-pins {
+			nand_pins: nand-state {
 				pins = "gpio53", "gpio55", "gpio56",
 				       "gpio57", "gpio58", "gpio59",
 				       "gpio60", "gpio62", "gpio63",
-- 
2.45.2

Re: [PATCH v2 0/5] ARM: dts: qcom: adhere to pinctrl dt schema

[Bjorn Andersson]

On Thu, 11 Jul 2024 12:01:37 +0100, Rayyan Ansari wrote:
> The following patches make the device trees compliant with the pinctrl
> text to dt schema conversion here:
> https://lore.kernel.org/all/20240709162009.5166-1-rayyan.ansari@linaro.org/
> 
> v1: https://lore.kernel.org/all/20240710084250.11342-1-rayyan.ansari@linaro.org/
> 
> Thanks,
> Rayyan
> 
> [...]

Applied, thanks!

[1/5] ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
      commit: 046301eafc3296efe7266832b47c9cc93ff0ad38
[2/5] ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes
      commit: 6dbec1c39d3ff53e24e434862c7b7da3552b1ffe
[3/5] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
      commit: c9c8f449c8a27791bd8540cbcb538a19568608cc
[4/5] ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
      commit: de52c020e1a9c3313d88405a4545020b1f5ab24d
[5/5] ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
      commit: 268a968ef946ccce45be7c01bf915dddce7208c9

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>