[PATCH v3 0/4] MSM8976 MDSS/GPU/WCNSS support

[PATCH v3 0/4] MSM8976 MDSS/GPU/WCNSS support

[Adam Skladowski]

This patch series provide support for display subsystem, gpu
and also adds wireless connectivity subsystem support.

Changes since v2
================
1. Disabled mdss_dsi nodes by default
2. Changed reg size of mdss_dsi0 to be equal on both
3. Added operating points to second mdss_dsi
4. Brought back required opp-supported-hw on adreno
5. Moved status under operating points on adreno

Changes since v1
================
1. Addressed feedback
2. Dropped already applied dt-bindings patches
3. Dropped sdc patch as it was submitted as part of other series
4. Dropped dt-bindings patch for Adreno, also separate now

Adam Skladowski (4):
  arm64: dts: qcom: msm8976: Add IOMMU nodes
  arm64: dts: qcom: msm8976: Add MDSS nodes
  arm64: dts: qcom: msm8976: Add Adreno GPU
  arm64: dts: qcom: msm8976: Add WCNSS node

 arch/arm64/boot/dts/qcom/msm8976.dtsi | 536 +++++++++++++++++++++++++-
 1 file changed, 532 insertions(+), 4 deletions(-)

-- 
2.44.0

[PATCH v3 1/4] arm64: dts: qcom: msm8976: Add IOMMU nodes

[Adam Skladowski]

Add the nodes describing the apps and gpu iommu and its context banks
that are found on msm8976 SoCs.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 81 +++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index d2bb1ada361a..8bdcc1438177 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -808,6 +808,87 @@ tcsr: syscon@1937000 {
 			reg = <0x01937000 0x30000>;
 		};
 
+		apps_iommu: iommu@1ee0000 {
+			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
+			reg = <0x01ee0000 0x3000>;
+			ranges  = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x15000 0x1000>;
+				qcom,ctx-asid = <20>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x16000 0x1000>;
+				qcom,ctx-asid = <21>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP0 */
+			iommu-ctx@17000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x17000 0x1000>;
+				qcom,ctx-asid = <22>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
+			ranges = <0 0x01f08000 0x8000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX3D_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&gcc OXILI_CX_GDSC>;
+
+			qcom,iommu-secure-id = <18>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			/* gfx3d user */
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x0 0x1000>;
+				qcom,ctx-asid = <0>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d secure */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x1000 0x1000>;
+				qcom,ctx-asid = <2>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d priv */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x2000 0x1000>;
+				qcom,ctx-asid = <1>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0200f000 0x1000>,
-- 
2.44.0

[PATCH v3 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes

[Adam Skladowski]

Add MDSS nodes to support displays on MSM8976 SoC.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 280 +++++++++++++++++++++++++-
 1 file changed, 276 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 8bdcc1438177..ce15c6ec9f4e 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -785,10 +785,10 @@ gcc: clock-controller@1800000 {
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
 			clock-names = "xo",
 				      "xo_a",
 				      "dsi0pll",
@@ -808,6 +808,278 @@ tcsr: syscon@1937000 {
 			reg = <0x01937000 0x30000>;
 		};
 
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8976-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>,
+					 <&gcc GCC_MDP_TBU_CLK>,
+					 <&gcc GCC_MDP_RT_TBU_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync",
+					      "tbu",
+					      "tbu_rt";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				iommus = <&apps_iommu 22>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-177780000 {
+						opp-hz = /bits/ 64 <177780000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-320000000 {
+						opp-hz = /bits/ 64 <320000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+					opp-360000000 {
+						opp-hz = /bits/ 64 <360000000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+
+					};
+
+					opp-161250000 {
+						opp-hz = /bits/ 64 <161250000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a96b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
 		apps_iommu: iommu@1ee0000 {
 			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
 			reg = <0x01ee0000 0x3000>;
-- 
2.44.0

Re: [PATCH v3 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes

[Konrad Dybcio]

On 4/13/24 19:03, Adam Skladowski wrote:
> Add MDSS nodes to support displays on MSM8976 SoC.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---

[...]

> +
> +				mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-177780000 {
> +						opp-hz = /bits/ 64 <177780000>;
> +						required-opps = <&rpmpd_opp_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmpd_opp_svs_plus>;
> +					};
> +
> +					opp-320000000 {
> +						opp-hz = /bits/ 64 <320000000>;
> +						required-opps = <&rpmpd_opp_nom>;
> +					};
> +					opp-360000000 {

Missing a newline above

[...]


> +				dsi0_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-125000000 {
> +						opp-hz = /bits/ 64 <125000000>;
> +						required-opps = <&rpmpd_opp_svs>;
> +
> +					};

You can borrow it from here

Looks reasonable otherwise

Konrad

[PATCH v3 3/4] arm64: dts: qcom: msm8976: Add Adreno GPU

[Adam Skladowski]

Add Adreno GPU node.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 71 +++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index ce15c6ec9f4e..acb6331999bd 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -1080,6 +1080,77 @@ mdss_dsi1_phy: phy@1a96a00 {
 			};
 		};
 
+		adreno_gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-510.0", "qcom,adreno";
+
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&gcc GCC_GFX3D_OXILI_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_AHB_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_GMEM_CLK>,
+				 <&gcc GCC_GFX3D_BIMC_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_TIMER_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem",
+				      "mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&gpu_iommu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-540000000 {
+					opp-hz = /bits/ 64 <540000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
 		apps_iommu: iommu@1ee0000 {
 			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
 			reg = <0x01ee0000 0x3000>;
-- 
2.44.0

Re: [PATCH v3 3/4] arm64: dts: qcom: msm8976: Add Adreno GPU

[Konrad Dybcio]

On 4/13/24 19:03, Adam Skladowski wrote:
> Add Adreno GPU node.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---

[...]

> +				opp-200000000 {
> +					opp-hz = /bits/ 64 <200000000>;
> +					required-opps = <&rpmpd_opp_low_svs>;
> +					opp-supported-hw = <0xff>;

Doesn't look like this platform had any speed binning going on, can drop?

Konrad

[PATCH v3 4/4] arm64: dts: qcom: msm8976: Add WCNSS node

[Adam Skladowski]

Add node describing wireless connectivity subsystem.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 104 ++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index acb6331999bd..1e492bcc56f0 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -771,6 +771,36 @@ blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			wcss_wlan_default: wcss-wlan-default-state  {
+				wcss-wlan2-pins {
+					pins = "gpio40";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio41";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio42";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan-pins {
+					pins = "gpio43", "gpio44";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1800000 {
@@ -1458,6 +1488,80 @@ blsp2_i2c4: i2c@7af8000 {
 			status = "disabled";
 		};
 
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu",
+				    "dxe",
+				    "pmu";
+
+			memory-region = <&wcnss_fw_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			power-domains = <&rpmpd MSM8976_VDDCX>,
+					<&rpmpd MSM8976_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcss_wlan_default>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
-- 
2.44.0

Re: [PATCH v3 4/4] arm64: dts: qcom: msm8976: Add WCNSS node

[Konrad Dybcio]

On 4/13/24 19:03, Adam Skladowski wrote:
> Add node describing wireless connectivity subsystem.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---

[...]

> +					wcnss_wifi: wifi {
> +						compatible = "qcom,wcnss-wlan";
> +
> +						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> +						interrupt-names = "tx", "rx";
> +
> +						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
> +						qcom,smem-state-names = "tx-enable",
> +									"tx-rings-empty";

Since you're already going to resend, please keep one entry per line,
this fragment is very inconsistent

looks good otherwise

Konrad

Re: [PATCH v3 0/4] MSM8976 MDSS/GPU/WCNSS support

[Bryan O'Donoghue]

On 13/04/2024 18:03, Adam Skladowski wrote:
> This patch series provide support for display subsystem, gpu
> and also adds wireless connectivity subsystem support.
> 
> Changes since v2
> ================
> 1. Disabled mdss_dsi nodes by default
> 2. Changed reg size of mdss_dsi0 to be equal on both
> 3. Added operating points to second mdss_dsi
> 4. Brought back required opp-supported-hw on adreno
> 5. Moved status under operating points on adreno
> 
> Changes since v1
> ================
> 1. Addressed feedback
> 2. Dropped already applied dt-bindings patches
> 3. Dropped sdc patch as it was submitted as part of other series
> 4. Dropped dt-bindings patch for Adreno, also separate now
> 
> Adam Skladowski (4):
>    arm64: dts: qcom: msm8976: Add IOMMU nodes
>    arm64: dts: qcom: msm8976: Add MDSS nodes
>    arm64: dts: qcom: msm8976: Add Adreno GPU
>    arm64: dts: qcom: msm8976: Add WCNSS node
> 
>   arch/arm64/boot/dts/qcom/msm8976.dtsi | 536 +++++++++++++++++++++++++-
>   1 file changed, 532 insertions(+), 4 deletions(-)
> 

I remembered you pinged me in IRC about my previous review feedback.

Would appreciate if you could add a response email to your cover letter 
explaining why that's not done.

I'm sure you're probably right but, good practice is to state in your 
log what was and wasn't done and why.

---
bod