Re: [PATCH 07/11] drm/msm/dpu: add sspp cursor blocks to msm8998 hw catalog

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 19/04/2023 17:41, Arnaud Vrac wrote:
> Now that cursor sspp blocks can be used for cursor planes, enable them
> on msm8998. The dma sspp blocks that were assigned to cursor planes can
> now be used for overlay planes instead.

While the change is correct, there is more about it. Composers, using 
universal planes, will see this plane too. They have no obligations to 
use it only for the cursor. At the minimum could you please extend the 
plane_atomic_check to check for the plane dimensions for the CURSOR pipes?

For this change:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> 
> Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
> ---
>   .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h    |  8 +++--
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 34 ++++++++++++++++++++++
>   2 files changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> index b07e8a9941f79..7de393b0f91d7 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> @@ -90,10 +90,14 @@ static const struct dpu_sspp_cfg msm8998_sspp[] = {
>   		sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
>   	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, 0x1ac, DMA_MSM8998_MASK,
>   		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
> -	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> +	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1ac, DMA_MSM8998_MASK,
>   		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2),
> -	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> +	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, 0x1ac, DMA_MSM8998_MASK,
>   		sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA3),
> +	SSPP_BLK("sspp_12", SSPP_CURSOR0, 0x34000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> +		msm8998_cursor_sblk_0, 2, SSPP_TYPE_CURSOR, DPU_CLK_CTRL_CURSOR0),
> +	SSPP_BLK("sspp_13", SSPP_CURSOR1, 0x36000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> +		msm8998_cursor_sblk_1, 10, SSPP_TYPE_CURSOR, DPU_CLK_CTRL_CURSOR1),
>   };
>   
>   static const struct dpu_lm_cfg msm8998_lm[] = {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 8d5d782a43398..f34fa704936bc 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -242,6 +242,22 @@ static const uint32_t wb2_formats[] = {
>   	DRM_FORMAT_XBGR4444,
>   };
>   
> +static const uint32_t cursor_formats[] = {
> +	DRM_FORMAT_ARGB8888,
> +	DRM_FORMAT_ABGR8888,
> +	DRM_FORMAT_RGBA8888,
> +	DRM_FORMAT_BGRA8888,
> +	DRM_FORMAT_XRGB8888,
> +	DRM_FORMAT_ARGB1555,
> +	DRM_FORMAT_ABGR1555,
> +	DRM_FORMAT_RGBA5551,
> +	DRM_FORMAT_BGRA5551,
> +	DRM_FORMAT_ARGB4444,
> +	DRM_FORMAT_ABGR4444,
> +	DRM_FORMAT_RGBA4444,
> +	DRM_FORMAT_BGRA4444,
> +};
> +
>   /*************************************************************
>    * SSPP sub blocks config
>    *************************************************************/
> @@ -300,6 +316,19 @@ static const uint32_t wb2_formats[] = {
>   	.virt_num_formats = ARRAY_SIZE(plane_formats), \
>   	}
>   
> +#define _CURSOR_SBLK(num) \
> +	{ \
> +	.maxdwnscale = SSPP_UNITY_SCALE, \
> +	.maxupscale = SSPP_UNITY_SCALE, \
> +	.smart_dma_priority = 0, \
> +	.src_blk = {.name = STRCAT("sspp_src_", num), \
> +		.id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \
> +	.format_list = cursor_formats, \
> +	.num_formats = ARRAY_SIZE(cursor_formats), \
> +	.virt_format_list = cursor_formats, \
> +	.virt_num_formats = ARRAY_SIZE(cursor_formats), \
> +	}
> +
>   static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 =
>   				_VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3);
>   static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 =
> @@ -309,6 +338,11 @@ static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
>   static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
>   				_VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3);
>   
> +static const struct dpu_sspp_sub_blks msm8998_cursor_sblk_0 =
> +				_CURSOR_SBLK("12");
> +static const struct dpu_sspp_sub_blks msm8998_cursor_sblk_1 =
> +				_CURSOR_SBLK("13");
> +
>   static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
>   	.rot_maxheight = 1088,
>   	.rot_num_formats = ARRAY_SIZE(rotation_v2_formats),
> 

-- 
With best wishes
Dmitry