From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
To: Yongxing Mou <quic_yongmou@quicinc.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Ritesh Kumar <quic_riteshk@quicinc.com>
Subject: Re: [PATCH 1/2] arm64: dts: qcom: qcs8300: add DisplayPort device nodes
Date: Thu, 5 Dec 2024 22:36:11 +0100 [thread overview]
Message-ID: <45643708-c138-4c77-85ce-fa7d49f2aa72@oss.qualcomm.com> (raw)
In-Reply-To: <20241127-dp_dts_qcs8300-v1-1-e3d13dec4233@quicinc.com>
On 27.11.2024 11:45 AM, Yongxing Mou wrote:
> Add device tree nodes for the DPTX0 controller with their
> corresponding PHYs found on Qualcomm QCS8300 SoC.
>
> Signed-off-by: Yongxing Mou <quic_yongmou@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/qcs8300.dtsi | 115 +++++++++++++++++++++++++++++++++-
> 1 file changed, 114 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> index 1642e2863affd5af0b4f68118a47b7a74b76df95..28deba0a389641b4dddbf4505d6f44c6607aa03b 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> @@ -987,6 +987,19 @@ mdss_mdp: display-controller@ae01000 {
> interrupt-parent = <&mdss>;
> interrupts = <0>;
>
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + dpu_intf0_out: endpoint {
> + remote-endpoint = <&mdss_dp0_in>;
> + };
> + };
> + };
> +
> mdp_opp_table: opp-table {
> compatible = "operating-points-v2";
>
> @@ -1011,6 +1024,104 @@ opp-650000000 {
> };
> };
> };
> +
> + mdss_dp0_phy: phy@aec2a00 {
> + compatible = "qcom,qcs8300-edp-phy";
> +
> + reg = <0x0 0x0aec2a00 0x0 0x200>,
0x19c
> + <0x0 0x0aec2200 0x0 0xd0>,
0xec
> + <0x0 0x0aec2600 0x0 0xd0>,
0xec
For lengths
> + <0x0 0x0aec2000 0x0 0x1c8>;
This one's correct
> +
> + clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
> + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>;
> + clock-names = "aux",
> + "cfg_ahb";
power-domains = <&rpmhpd RPMHPD_MX>;
(or maybe even MXC?)
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + mdss_dp0: displayport-controller@af54000 {
> + compatible = "qcom,qcs8300-dp";
> +
> + reg = <0x0 0x0af54000 0x0 0x104>,
0x200
> + <0x0 0x0af54200 0x0 0x0c0>,
0x200
> + <0x0 0x0af55000 0x0 0x770>,
0xc00
> + <0x0 0x0af56000 0x0 0x09c>;
0x400
for lengths
Konrad
next prev parent reply other threads:[~2024-12-05 21:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-27 10:45 [PATCH 0/2] Enable Display Port for Qualcomm QCS8300-ride platform Yongxing Mou
2024-11-27 10:45 ` [PATCH 1/2] arm64: dts: qcom: qcs8300: add DisplayPort device nodes Yongxing Mou
2024-12-05 21:36 ` Konrad Dybcio [this message]
2024-12-26 7:03 ` Yongxing Mou
2024-12-26 19:57 ` Dmitry Baryshkov
2025-01-09 9:41 ` Yongxing Mou
2024-12-30 13:27 ` Konrad Dybcio
2025-01-09 9:43 ` Yongxing Mou
2025-01-08 23:06 ` Bjorn Andersson
2025-01-09 9:47 ` Yongxing Mou
2024-11-27 10:45 ` [PATCH 2/2] arm64: dts: qcom: qcs8300-ride: Enable Display Port Yongxing Mou
2024-12-05 21:46 ` Konrad Dybcio
2024-12-26 7:06 ` Yongxing Mou
2024-12-30 13:27 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45643708-c138-4c77-85ce-fa7d49f2aa72@oss.qualcomm.com \
--to=konrad.dybcio@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_riteshk@quicinc.com \
--cc=quic_yongmou@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox