Re: [PATCH 4/5] arm64: dts: qcom: milos-fairphone-fp6: Enable Bluetooth

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 1/16/26 3:50 PM, Luca Weiss wrote:
> Add the nodes to describe the WCN6755 chip with its PMU and Bluetooth
> parts.
> 
> Thanks to Alexander Koskovich for helping with the bringup, adding
> 'clocks' to the PMU node to make Bluetooth work.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 174 +++++++++++++++++++++++
>  1 file changed, 174 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> index 52895dd9e4fa..cbe1507b0aaa 100644
> --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> @@ -24,6 +24,7 @@ / {
>  
>  	aliases {
>  		serial0 = &uart5;
> +		serial1 = &uart11;
>  	};
>  
>  	gpio-keys {
> @@ -215,6 +216,67 @@ trip1 {
>  			};
>  		};
>  	};
> +
> +	wcn6750-pmu {
> +		compatible = "qcom,wcn6750-pmu"; /* WCN6755 */

I think a fallback compatible would be in order, if the data matches
exactly

> +	bluetooth_enable_default: bluetooth-enable-default-state {
> +		pins = "gpio53";
> +		function = "gpio";
> +		output-low;
> +		bias-disable;
> +	};

Not sure if we need to drive that pin.. perhaps a pull-down would
suffice?

[...]

> +	bluetooth {
> +		compatible = "qcom,wcn6750-bt"; /* WCN6755 */

Likewise

Konrad