Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
To: Luo Jie <quic_luoj@quicinc.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	quic_kkumarcs@quicinc.com, quic_suruchia@quicinc.com,
	quic_pavir@quicinc.com, quic_linchen@quicinc.com,
	quic_leiwei@quicinc.com
Subject: Re: [PATCH 1/4] dt-bindings: clock: qcom: Add CMN PLL support for IPQ5424 SoC
Date: Tue, 25 Mar 2025 00:57:24 +0100	[thread overview]
Message-ID: <55eada15-222e-4b97-a519-95b5e3aa7c23@oss.qualcomm.com> (raw)
In-Reply-To: <20250321-qcom_ipq5424_cmnpll-v1-1-3ea8e5262da4@quicinc.com>

On 3/21/25 1:49 PM, Luo Jie wrote:
> The CMN PLL block in the IPQ5424 SoC takes 48 MHZ as the reference
> input clock. The output clocks are the same as IPQ9574 SoC, except
> for the clock rate of output clocks to PPE and NSS.
> 
> Also, add macros for clock rates that are applicable specifically
> only for IPQ5424.
> 
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> ---
>  .../devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml        |  1 +
>  include/dt-bindings/clock/qcom,ipq-cmn-pll.h                   | 10 +++++++++-
>  2 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml
> index f869b3739be8..bbaf896ae908 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml
> @@ -25,6 +25,7 @@ properties:
>    compatible:
>      enum:
>        - qcom,ipq9574-cmn-pll
> +      - qcom,ipq5424-cmn-pll
>  
>    reg:
>      maxItems: 1
> diff --git a/include/dt-bindings/clock/qcom,ipq-cmn-pll.h b/include/dt-bindings/clock/qcom,ipq-cmn-pll.h
> index 936e92b3b62c..e30d57001c38 100644
> --- a/include/dt-bindings/clock/qcom,ipq-cmn-pll.h
> +++ b/include/dt-bindings/clock/qcom,ipq-cmn-pll.h
> @@ -1,6 +1,6 @@
>  /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
>  /*
> - * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
>   */
>  
>  #ifndef _DT_BINDINGS_CLK_QCOM_IPQ_CMN_PLL_H
> @@ -19,4 +19,12 @@
>  #define ETH1_50MHZ_CLK			7
>  #define ETH2_50MHZ_CLK			8
>  #define ETH_25MHZ_CLK			9
> +
> +/*
> + * The CMN PLL output clock rates that are specifically applicable for IPQ5424
> + * SoC. For IPQ5424, the other output clocks and their rates are same as IPQ9574.
> + */
> +#define NSS_300MHZ_CLK			4
> +#define PPE_375MHZ_CLK			5

Not a huge fan of this, such differences are only relevant to the driver
part in my view - bindings only let a consumer reference a specific piece
of hardware

Konrad

  reply	other threads:[~2025-03-24 23:57 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-21 12:49 [PATCH 0/4] Add CMN PLL clock controller support for IPQ5424 Luo Jie
2025-03-21 12:49 ` [PATCH 1/4] dt-bindings: clock: qcom: Add CMN PLL support for IPQ5424 SoC Luo Jie
2025-03-24 23:57   ` Konrad Dybcio [this message]
2025-03-24 23:59     ` Konrad Dybcio
2025-03-25  8:22       ` Krzysztof Kozlowski
2025-03-26  7:10         ` Jie Luo
2025-03-25  8:19   ` Krzysztof Kozlowski
2025-03-25 15:20     ` Jie Luo
2025-03-21 12:49 ` [PATCH 2/4] clk: qcom: cmnpll: Add IPQ5424 SoC support Luo Jie
2025-03-24 23:42   ` Stephen Boyd
2025-03-25 15:12     ` Jie Luo
2025-03-21 12:49 ` [PATCH 3/4] arm64: dts: ipq5424: Add CMN PLL node Luo Jie
2025-04-04 23:02   ` Konrad Dybcio
2025-03-21 12:49 ` [PATCH 4/4] arm64: dts: qcom: Update IPQ5424 xo_board to use fixed factor clock Luo Jie
2025-04-10 16:46   ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55eada15-222e-4b97-a519-95b5e3aa7c23@oss.qualcomm.com \
    --to=konrad.dybcio@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=quic_kkumarcs@quicinc.com \
    --cc=quic_leiwei@quicinc.com \
    --cc=quic_linchen@quicinc.com \
    --cc=quic_luoj@quicinc.com \
    --cc=quic_pavir@quicinc.com \
    --cc=quic_suruchia@quicinc.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox