Re: [PATCH v6 1/4] arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpoint

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 01/12/2022 01:51, Kuogee Hsieh wrote:
> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
> add link-frequencies property into dp_out endpoint as well. The last
> frequency specified at link-frequencies will be the max link rate
> supported by DP.
> 
> Changes in v5:
> -- revert changes at sc7180.dtsi and sc7280.dtsi
> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
> 
> Changes in v6:
> -- add data-lanes and link-frequencies to yaml
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 +++++++++++++++++

Separate patch. Also you didn't check the get_maintainers output, so 
required parties were not included into the distribution.

Also as you'd check the get_maintainers output, please fix other email 
addresses too.

>   arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>   3 files changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> index 94bc6e1..af70343 100644
> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> @@ -90,6 +90,20 @@ properties:
>           $ref: /schemas/graph.yaml#/properties/port
>           description: Output endpoint of the controller
>   
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +          properties:
> +            link-frequencies: true
> +            data-lanes: true

No. Use $ref for both of them.

> +
> +          required:
> +            - link-frequencies
> +            - data-lanes

No, they are not required.

> +
> +          additionalProperties: false
> +

deprecation of old data-lanes property?

>   required:
>     - compatible
>     - reg
> @@ -158,6 +172,9 @@ examples:
>                   reg = <1>;
>                   endpoint {
>                       remote-endpoint = <&typec>;
> +                    data-lanes = <1 2>;
> +                    link-frequencies = /bits/ 64 <160000000 270000000
> +                                                  540000000 810000000>;

I guess the number of zeroes is wrong here. This is 160 MHz ... 810 Mhz, 
rather than 1.6 GHz ... 8.1 GHz

>                   };
>               };
>           };
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index 754d2d6..39f0844 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>   	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&dp_hot_plug_det>;
> -	data-lanes = <0 1>;
> +};
> +
> +&dp_out {
> +    data-lanes = <0  1>;
> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;

Same comment here.

>   };
>   
>   &pm6150_adc {
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> index 93e39fc..b7c343d 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>   	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&dp_hot_plug_det>;
> -	data-lanes = <0 1>;
> +};
> +
> +&dp_out {
> +	data-lanes = <0  1>;
> +	link-frequencies = /bits/ 64 <160000000 270000000 540000000 810000000>;

And here.

>   };
>   
>   &mdss_mdp {

-- 
With best wishes
Dmitry