[PATCH v8 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs

[PATCH v8 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs

[Bibek Kumar Patro]

This patch series consist of five parts and covers the following:

1. Re-enable context caching for Qualcomm SoCs to retain prefetcher
   settings during reset and runtime suspend.

2. Remove cfg inside qcom_smmu structure and replace it with single
   pointer to qcom_smmu_match_data avoiding replication of multiple
   members from same.

3. Introduce intital set of driver changes to implement ACTLR register
   for custom prefetcher settings in Qualcomm SoCs.

4. Add ACTLR data and implementation operations for SM8550.

5. Add ACTLR data and implementation operations for SC7280.

Changes in v8 from v7:
 - Added reviewed-by tags on patch 1/5, 2/5.
 Changes to incorporate suggestions from Pavan and Konrad:
 - Remove non necessary extra lines.
 - Use num_smmu and num_actlrcfg to store the array size and use the
   same to traverse the table and save on sentinel space along with
   indentation levels.
 - Refactor blocks containing qcom_smmu_set_actlr to remove block
   repetition in patch 3/5.
 - Change copyright year from 2023 to 2022-2023 in patch 3/5.
 - Modify qcom_smmu_match_data.actlrvar and actlr_variant.actlrcfg to
   const pointer to a const resource.
 - use C99 designated initializers and put the address first.
 Link to v7:
 https://lore.kernel.org/all/20240109114220.30243-1-quic_bibekkum@quicinc.com/

Changes in v7 from v6:
 Changes to incorporate suggestions from Dmitry as follows:
 - Use io_start address instead of compatible string to identify the
   correct instance by comparing with smmu start address and check for
   which smmu the corresponding actlr table is to be picked.
Link to v6:
https://lore.kernel.org/all/20231220133808.5654-1-quic_bibekkum@quicinc.com/

Changes in v6 from v5:
 - Remove extra Suggested-by tags.
 - Add return check for arm_mmu500_reset in 1/5 as discussed.
Link to v5:
https://lore.kernel.org/all/20231219135947.1623-1-quic_bibekkum@quicinc.com/

Changes in v5 from v4:
 New addition:
 - Modify copyright year in arm-smmu-qcom.h to 2023 from 2022.
 Changes to incorporate suggestions from Dmitry as follows:
 - Modify the defines for prefetch in (foo << bar) format
   as suggested.(FIELD_PREP could not be used in defines
   is not inside any block/function)
 Changes to incorporate suggestions from Konrad as follows:
 - Shift context caching enablement patch as 1/5 instead of 5/5 to
   be picked up as independent patch.
 - Fix the codestyle to orient variables in reverse xmas tree format
   for patch 1/5.
 - Fix variable name in patch 1/5 as suggested.
 Link to v4:
https://lore.kernel.org/all/20231215101827.30549-1-quic_bibekkum@quicinc.com/

Changes in v4 from v3:
 New addition:
 - Remove actlrcfg_size and use NULL end element instead to traverse
   the actlr table, as this would be a cleaner approach by removing
   redundancy of actlrcfg_size.
 - Renaming of actlr set function to arm_smmu_qcom based proprietary
   convention.
 - break from loop once sid is found and ACTLR value is initialized
   in qcom_smmu_set_actlr.
 - Modify the GFX prefetch value separating into 2 sensible defines.
 - Modify comments for prefetch defines as per SMMU-500 TRM.
 Changes to incorporate suggestions from Konrad as follows:
 - Use Reverse-Christmas-tree sorting wherever applicable.
 - Pass arguments directly to arm_smmu_set_actlr instead of creating
   duplicate variables.
 - Use array indexing instead of direct pointer addressed by new
   addition of eliminating actlrcfg_size.
 - Switch the HEX value's case from upper to lower case in SC7280
   actlrcfg table.
 Changes to incorporate suggestions from Dmitry as follows:
 - Separate changes not related to ACTLR support to different commit
   with patch 5/5.
 - Using pointer to struct for arguments in smr_is_subset().
 Changes to incorporate suggestions from Bjorn as follows:
 - fix the commit message for patch 2/5 to properly document the
   value space to avoid confusion.
 Fixed build issues reported by kernel test robot [1] for
 arm64-allyesconfig [2].
 [1]: https://lore.kernel.org/all/202312011750.Pwca3TWE-lkp@intel.com/
 [2]:
https://download.01.org/0day-ci/archive/20231201/202312011750.Pwca3TWE-lkp@intel.com/config
 Link to v3:
https://lore.kernel.org/all/20231127145412.3981-1-quic_bibekkum@quicinc.com/

Changes in v3 from v2:
 New addition:
 - Include patch 3/4 for adding ACTLR support and data for SC7280.
 - Add driver changes for actlr support in gpu smmu.
 - Add target wise actlr data and implementation ops for gpu smmu.
 Changes to incorporate suggestions from Robin as follows:
 - Match the ACTLR values with individual corresponding SID instead
   of assuming that any SMR will be programmed to match a superset of
   the data.
 - Instead of replicating each elements from qcom_smmu_match_data to
   qcom_smmu structre during smmu device creation, replace the
   replicated members with qcom_smmu_match_data structure inside
   qcom_smmu structre and handle the dereference in places that
   requires them.
 Changes to incorporate suggestions from Dmitry and Konrad as follows:
 - Maintain actlr table inside a single structure instead of
   nested structure.
 - Rename prefetch defines to more appropriately describe their
   behavior.
 - Remove SM8550 specific implementation ops and roll back to default
   qcom_smmu_500_impl implementation ops.
 - Add back the removed comments which are NAK.
 - Fix commit description for patch 4/4.
 Link to v2:
https://lore.kernel.org/all/20231114135654.30475-1-quic_bibekkum@quicinc.com/

Changes in v2 from v1:
 - Incorporated suggestions on v1 from Dmitry,Konrad,Pratyush.
 - Added defines for ACTLR values.
 - Linked sm8550 implementation structure to corresponding
   compatible string.
 - Repackaged actlr value set implementation to separate function.
 - Fixed indentation errors.
 - Link to v1:
https://lore.kernel.org/all/20231103215124.1095-1-quic_bibekkum@quicinc.com/

Changes in v1 from RFC:
 - Incorporated suggestion form Robin on RFC
 - Moved the actlr data table into driver, instead of maintaining
   it inside soc specific DT and piggybacking on exisiting iommus
   property (iommu = <SID, MASK, ACTLR>) to set this value during
   smmu probe.
 - Link to RFC:
https://lore.kernel.org/all/a01e7e60-6ead-4a9e-ba90-22a8a6bbd03f@quicinc.com/

Bibek Kumar Patro (5):
  iommu/arm-smmu: re-enable context caching in smmu reset operation
  iommu/arm-smmu: refactor qcom_smmu structure to include single pointer
  iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  iommu/arm-smmu: add ACTLR data and support for SM8550
  iommu/arm-smmu: add ACTLR data and support for SC7280

 .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c  |   2 +-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c    | 220 +++++++++++++++++-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h    |  14 +-
 drivers/iommu/arm/arm-smmu/arm-smmu.c         |   5 +-
 drivers/iommu/arm/arm-smmu/arm-smmu.h         |   5 +
 5 files changed, 236 insertions(+), 10 deletions(-)

--
2.17.1

[PATCH v8 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation

[Bibek Kumar Patro]

Default MMU-500 reset operation disables context caching in
prefetch buffer. It is however expected for context banks using
the ACTLR register to retain their prefetch value during reset
and runtime suspend.

Replace default MMU-500 reset operation with Qualcomm specific reset
operation which envelope the default reset operation and re-enables
context caching in prefetch buffer for Qualcomm SoCs.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 36 ++++++++++++++++++++--
 1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 549ae4dba3a6..c432e80a69fc 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -14,6 +14,16 @@

 #define QCOM_DUMMY_VAL	-1

+/*
+ * SMMU-500 TRM defines BIT(0) as CMTLB (Enable context caching in the
+ * macro TLB) and BIT(1) as CPRE (Enable context caching in the prefetch
+ * buffer). The remaining bits are implementation defined and vary across
+ * SoCs.
+ */
+
+#define CPRE			(1 << 1)
+#define CMTLB			(1 << 0)
+
 static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
 {
 	return container_of(smmu, struct qcom_smmu, smmu);
@@ -376,11 +386,31 @@ static int qcom_smmu_def_domain_type(struct device *dev)
 	return match ? IOMMU_DOMAIN_IDENTITY : 0;
 }

+static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
+{
+	int ret;
+	u32 val;
+	int i;
+
+	ret = arm_mmu500_reset(smmu);
+	if (ret)
+		return ret;
+
+	/* arm_mmu500_reset() disables CPRE which is re-enabled here */
+	for (i = 0; i < smmu->num_context_banks; ++i) {
+		val = arm_smmu_cb_read(smmu, i, ARM_SMMU_CB_ACTLR);
+		val |= CPRE;
+		arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_ACTLR, val);
+	}
+
+	return 0;
+}
+
 static int qcom_sdm845_smmu500_reset(struct arm_smmu_device *smmu)
 {
 	int ret;

-	arm_mmu500_reset(smmu);
+	qcom_smmu500_reset(smmu);

 	/*
 	 * To address performance degradation in non-real time clients,
@@ -407,7 +437,7 @@ static const struct arm_smmu_impl qcom_smmu_500_impl = {
 	.init_context = qcom_smmu_init_context,
 	.cfg_probe = qcom_smmu_cfg_probe,
 	.def_domain_type = qcom_smmu_def_domain_type,
-	.reset = arm_mmu500_reset,
+	.reset = qcom_smmu500_reset,
 	.write_s2cr = qcom_smmu_write_s2cr,
 	.tlb_sync = qcom_smmu_tlb_sync,
 };
@@ -432,7 +462,7 @@ static const struct arm_smmu_impl qcom_adreno_smmu_v2_impl = {
 static const struct arm_smmu_impl qcom_adreno_smmu_500_impl = {
 	.init_context = qcom_adreno_smmu_init_context,
 	.def_domain_type = qcom_smmu_def_domain_type,
-	.reset = arm_mmu500_reset,
+	.reset = qcom_smmu500_reset,
 	.alloc_context_bank = qcom_adreno_smmu_alloc_context_bank,
 	.write_sctlr = qcom_adreno_smmu_write_sctlr,
 	.tlb_sync = qcom_smmu_tlb_sync,
--
2.17.1

[PATCH v8 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer

[Bibek Kumar Patro]

qcom_smmu_match_data is static and constant so refactor qcom_smmu
to store single pointer to qcom_smmu_match_data instead of
replicating multiple child members of the same and handle the further
dereferences in the places that want them.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c | 2 +-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c       | 2 +-
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h       | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
index bb89d49adf8d..e9798b133cbb 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
@@ -22,7 +22,7 @@ void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu)
 	if (__ratelimit(&rs)) {
 		dev_err(smmu->dev, "TLB sync timed out -- SMMU may be deadlocked\n");

-		cfg = qsmmu->cfg;
+		cfg = qsmmu->data->cfg;
 		if (!cfg)
 			return;

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index c432e80a69fc..333daeb18c1c 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -495,7 +495,7 @@ static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu,
 		return ERR_PTR(-ENOMEM);

 	qsmmu->smmu.impl = impl;
-	qsmmu->cfg = data->cfg;
+	qsmmu->data = data;

 	return &qsmmu->smmu;
 }
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
index 593910567b88..f3b91963e234 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
@@ -8,7 +8,7 @@

 struct qcom_smmu {
 	struct arm_smmu_device smmu;
-	const struct qcom_smmu_config *cfg;
+	const struct qcom_smmu_match_data *data;
 	bool bypass_quirk;
 	u8 bypass_cbndx;
 	u32 stall_enabled;
--
2.17.1

[PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings

[Bibek Kumar Patro]

Currently in Qualcomm  SoCs the default prefetch is set to 1 which allows
the TLB to fetch just the next page table. MMU-500 features ACTLR
register which is implementation defined and is used for Qualcomm SoCs
to have a custom prefetch setting enabling TLB to prefetch the next set
of page tables accordingly allowing for faster translations.

ACTLR value is unique for each SMR (Stream matching register) and stored
in a pre-populated table. This value is set to the register during
context bank initialisation.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 67 ++++++++++++++++++++++
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 12 +++-
 drivers/iommu/arm/arm-smmu/arm-smmu.c      |  5 +-
 drivers/iommu/arm/arm-smmu/arm-smmu.h      |  5 ++
 4 files changed, 86 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 333daeb18c1c..e6fad02aae92 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -24,6 +24,12 @@
 #define CPRE			(1 << 1)
 #define CMTLB			(1 << 0)

+struct actlr_config {
+	u16 sid;
+	u16 mask;
+	u32 actlr;
+};
+
 static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
 {
 	return container_of(smmu, struct qcom_smmu, smmu);
@@ -215,10 +221,42 @@ static bool qcom_adreno_can_do_ttbr1(struct arm_smmu_device *smmu)
 	return true;
 }

+static void qcom_smmu_set_actlr(struct device *dev, struct arm_smmu_device *smmu, int cbndx,
+		const struct actlr_config *actlrcfg, const size_t num_actlrcfg)
+{
+	struct arm_smmu_master_cfg *cfg = dev_iommu_priv_get(dev);
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct arm_smmu_smr *smr;
+	u16 mask;
+	int idx;
+	u16 id;
+	int i;
+	int j;
+
+	for (i = 0; i < num_actlrcfg; i++) {
+		id = actlrcfg[i].sid;
+		mask = actlrcfg[i].mask;
+
+		for_each_cfg_sme(cfg, fwspec, j, idx) {
+			smr = &smmu->smrs[idx];
+			if (smr_is_subset(smr, id, mask)) {
+				arm_smmu_cb_write(smmu, cbndx, ARM_SMMU_CB_ACTLR,
+						actlrcfg[i].actlr);
+				break;
+			}
+		}
+	}
+}
+
 static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
 		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
 {
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
+	const struct actlr_variant *actlrvar;
+	int cbndx = smmu_domain->cfg.cbndx;
 	struct adreno_smmu_priv *priv;
+	int i;

 	smmu_domain->cfg.flush_walk_prefer_tlbiasid = true;

@@ -248,6 +286,18 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
 	priv->set_stall = qcom_adreno_smmu_set_stall;
 	priv->resume_translation = qcom_adreno_smmu_resume_translation;

+	actlrvar = qsmmu->data->actlrvar;
+	if (!actlrvar)
+		return 0;
+
+	for (i = 0; i < qsmmu->data->num_smmu ; i++) {
+		if (actlrvar[i].io_start == smmu->ioaddr) {
+			qcom_smmu_set_actlr(dev, smmu, cbndx, actlrvar[i].actlrcfg,
+				       actlrvar[i].num_actlrcfg);
+			break;
+		}
+	}
+
 	return 0;
 }

@@ -274,7 +324,24 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
 static int qcom_smmu_init_context(struct arm_smmu_domain *smmu_domain,
 		struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
 {
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
+	const struct actlr_variant *actlrvar;
+	int cbndx = smmu_domain->cfg.cbndx;
+	int i;
+
 	smmu_domain->cfg.flush_walk_prefer_tlbiasid = true;
+	actlrvar = qsmmu->data->actlrvar;
+	if (!actlrvar)
+		return 0;
+
+	for (i = 0; i < qsmmu->data->num_smmu ; i++) {
+		if (actlrvar[i].io_start == smmu->ioaddr) {
+			qcom_smmu_set_actlr(dev, smmu, cbndx, actlrvar[i].actlrcfg,
+				       actlrvar[i].num_actlrcfg);
+			break;
+		}
+	}

 	return 0;
 }
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
index f3b91963e234..f7865f19774c 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */

 #ifndef _ARM_SMMU_QCOM_H
@@ -24,8 +24,18 @@ struct qcom_smmu_config {
 	const u32 *reg_offset;
 };

+struct actlr_config;
+
+struct actlr_variant {
+	const resource_size_t io_start;
+	const struct actlr_config * const actlrcfg;
+	const size_t num_actlrcfg;
+};
+
 struct qcom_smmu_match_data {
+	const struct actlr_variant * const actlrvar;
 	const struct qcom_smmu_config *cfg;
+	const size_t num_smmu;
 	const struct arm_smmu_impl *impl;
 	const struct arm_smmu_impl *adreno_impl;
 };
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index d6d1a2a55cc0..0c7f700b27dd 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -990,9 +990,10 @@ static int arm_smmu_find_sme(struct arm_smmu_device *smmu, u16 id, u16 mask)
 		 * expect simply identical entries for this case, but there's
 		 * no harm in accommodating the generalisation.
 		 */
-		if ((mask & smrs[i].mask) == mask &&
-		    !((id ^ smrs[i].id) & ~smrs[i].mask))
+
+		if (smr_is_subset(&smrs[i], id, mask))
 			return i;
+
 		/*
 		 * If the new entry has any other overlap with an existing one,
 		 * though, then there always exists at least one stream ID
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index 703fd5817ec1..2e4f65412c6b 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -501,6 +501,11 @@ static inline void arm_smmu_writeq(struct arm_smmu_device *smmu, int page,
 		writeq_relaxed(val, arm_smmu_page(smmu, page) + offset);
 }

+static inline bool smr_is_subset(struct arm_smmu_smr *smrs, u16 id, u16 mask)
+{
+	return (mask & smrs->mask) == mask && !((id ^ smrs->id) & ~smrs->mask);
+}
+
 #define ARM_SMMU_GR0		0
 #define ARM_SMMU_GR1		1
 #define ARM_SMMU_CB(s, n)	((s)->numpage + (n))
--
2.17.1

Re: [PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings

[Konrad Dybcio]

On 1/16/24 16:04, Bibek Kumar Patro wrote:
> Currently in Qualcomm  SoCs the default prefetch is set to 1 which allows
> the TLB to fetch just the next page table. MMU-500 features ACTLR
> register which is implementation defined and is used for Qualcomm SoCs
> to have a custom prefetch setting enabling TLB to prefetch the next set
> of page tables accordingly allowing for faster translations.
> 
> ACTLR value is unique for each SMR (Stream matching register) and stored
> in a pre-populated table. This value is set to the register during
> context bank initialisation.
> 
> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Since it's your idea with Dmitry's review suggestions, I don't think
this tag makes sense.

It's normally used for situations like:

Colleague X: "Hey Bibek, I noticed x broke on y, can you fix it?"
"Sure!" <proceeds to make a commit with suggested-by Colleague X>

Just a nit below:

> +struct actlr_config {
> +	u16 sid;
> +	u16 mask;
> +	u32 actlr;
> +};

This, can go here, in the header:

> +struct actlr_config;
> +
> +struct actlr_variant {
> +	const resource_size_t io_start;
> +	const struct actlr_config * const actlrcfg;
> +	const size_t num_actlrcfg;
> +};
> +

Otherwise, this looks good!

Konrad

Re: [PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings

[Bibek Kumar Patro]

On 1/18/2024 11:25 PM, Konrad Dybcio wrote:
> 
> 
> On 1/16/24 16:04, Bibek Kumar Patro wrote:
>> Currently in Qualcomm  SoCs the default prefetch is set to 1 which allows
>> the TLB to fetch just the next page table. MMU-500 features ACTLR
>> register which is implementation defined and is used for Qualcomm SoCs
>> to have a custom prefetch setting enabling TLB to prefetch the next set
>> of page tables accordingly allowing for faster translations.
>>
>> ACTLR value is unique for each SMR (Stream matching register) and stored
>> in a pre-populated table. This value is set to the register during
>> context bank initialisation.
>>
>> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Since it's your idea with Dmitry's review suggestions, I don't think
> this tag makes sense.
> 
> It's normally used for situations like:
> 
> Colleague X: "Hey Bibek, I noticed x broke on y, can you fix it?"
> "Sure!" <proceeds to make a commit with suggested-by Colleague X>
> 

Got it, thanks for the inputs. Will remove this tag as it won't make 
sense in this case as explained by you.

> Just a nit below:
> 
>> +struct actlr_config {
>> +    u16 sid;
>> +    u16 mask;
>> +    u32 actlr;
>> +};
> 
> This, can go here, in the header:
> 

Sure, Noted. Will add this to the header.
Initially made it local, since it is only being used
in the tables.

Thanks,
Bibek

>> +struct actlr_config;
>> +
>> +struct actlr_variant {
>> +    const resource_size_t io_start;
>> +    const struct actlr_config * const actlrcfg;
>> +    const size_t num_actlrcfg;
>> +};
>> +
> 
> Otherwise, this looks good!
> 
> Konrad

[PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550

[Bibek Kumar Patro]

Add ACTLR data table for SM8550 along with support for
same including SM8550 specific implementation operations.

Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 85 ++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index e6fad02aae92..26acfbdafd0f 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -23,6 +23,12 @@

 #define CPRE			(1 << 1)
 #define CMTLB			(1 << 0)
+#define PREFETCH_SHIFT		8
+#define PREFETCH_DEFAULT	0
+#define PREFETCH_SHALLOW	(1 << PREFETCH_SHIFT)
+#define PREFETCH_MODERATE	(2 << PREFETCH_SHIFT)
+#define PREFETCH_DEEP		(3 << PREFETCH_SHIFT)
+#define PREFETCH_SWITCH_GFX	(5 << 3)

 struct actlr_config {
 	u16 sid;
@@ -30,6 +36,75 @@ struct actlr_config {
 	u32 actlr;
 };

+static const struct actlr_config sm8550_apps_actlr_cfg[] = {
+	{ 0x18a0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x18e0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x0800, 0x0020, PREFETCH_DEFAULT | CMTLB },
+	{ 0x1800, 0x00c0, PREFETCH_DEFAULT | CMTLB },
+	{ 0x1820, 0x0000, PREFETCH_DEFAULT | CMTLB },
+	{ 0x1860, 0x0000, PREFETCH_DEFAULT | CMTLB },
+	{ 0x0c01, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c02, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c03, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c04, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c05, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c06, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c07, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c08, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c09, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c0c, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c0d, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c0e, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x0c0f, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1961, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1962, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1963, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1964, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1965, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1966, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1967, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1968, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1969, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x196c, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x196d, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x196e, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x196f, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c1, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c2, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c3, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c4, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c5, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c6, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c7, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c8, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19c9, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19cc, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19cd, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19ce, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x19cf, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
+	{ 0x1c00, 0x0002, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1c01, 0x0000, PREFETCH_DEFAULT | CMTLB },
+	{ 0x1920, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1923, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1924, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1940, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1941, 0x0004, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1943, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1944, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1947, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
+};
+
+static const struct actlr_config sm8550_gfx_actlr_cfg[] = {
+	{ 0x0000, 0x03ff, PREFETCH_SWITCH_GFX | PREFETCH_DEEP | CPRE | CMTLB },
+};
+
+static const struct actlr_variant sm8550_actlr[] = {
+	{ .io_start = 0x15000000, .actlrcfg = sm8550_apps_actlr_cfg,
+			.num_actlrcfg = ARRAY_SIZE(sm8550_apps_actlr_cfg) },
+	{ .io_start = 0x03da0000, .actlrcfg = sm8550_gfx_actlr_cfg,
+			.num_actlrcfg = ARRAY_SIZE(sm8550_gfx_actlr_cfg) },
+};
+
 static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
 {
 	return container_of(smmu, struct qcom_smmu, smmu);
@@ -601,6 +676,15 @@ static const struct qcom_smmu_match_data sdm845_smmu_500_data = {
 	/* Also no debug configuration. */
 };

+
+static const struct qcom_smmu_match_data sm8550_smmu_500_impl0_data = {
+	.impl = &qcom_smmu_500_impl,
+	.adreno_impl = &qcom_adreno_smmu_500_impl,
+	.cfg = &qcom_smmu_impl0_cfg,
+	.actlrvar = sm8550_actlr,
+	.num_smmu = ARRAY_SIZE(sm8550_actlr),
+};
+
 static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
 	.impl = &qcom_smmu_500_impl,
 	.adreno_impl = &qcom_adreno_smmu_500_impl,
@@ -635,6 +719,7 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
 	{ .compatible = "qcom,sm8250-smmu-500", .data = &qcom_smmu_500_impl0_data },
 	{ .compatible = "qcom,sm8350-smmu-500", .data = &qcom_smmu_500_impl0_data },
 	{ .compatible = "qcom,sm8450-smmu-500", .data = &qcom_smmu_500_impl0_data },
+	{ .compatible = "qcom,sm8550-smmu-500", .data = &sm8550_smmu_500_impl0_data },
 	{ .compatible = "qcom,smmu-500", .data = &qcom_smmu_500_impl0_data },
 	{ }
 };
--
2.17.1

Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550

[Konrad Dybcio]

On 1/16/24 16:04, Bibek Kumar Patro wrote:
> Add ACTLR data table for SM8550 along with support for
> same including SM8550 specific implementation operations.
> 
> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
> ---

[...]

> +static const struct actlr_variant sm8550_actlr[] = {
> +	{ .io_start = 0x15000000, .actlrcfg = sm8550_apps_actlr_cfg,
> +			.num_actlrcfg = ARRAY_SIZE(sm8550_apps_actlr_cfg) },
> +	{ .io_start = 0x03da0000, .actlrcfg = sm8550_gfx_actlr_cfg,
> +			.num_actlrcfg = ARRAY_SIZE(sm8550_gfx_actlr_cfg) },
> +};
Just a nit again, but if struct definitions need to be wrapped, this looks
better:

{
	.io_start = 0...,
	.aclrcfg = ...,
	.num_actlrcfg = ARR..,
}, {
	.io_start = 0..,
	.aclrcfg = ...,
	.num_actlrcfg = ARR..,
};

Konrad

Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550

[Bibek Kumar Patro]

On 1/18/2024 11:28 PM, Konrad Dybcio wrote:
> 
> 
> On 1/16/24 16:04, Bibek Kumar Patro wrote:
>> Add ACTLR data table for SM8550 along with support for
>> same including SM8550 specific implementation operations.
>>
>> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
>> ---
> 
> [...]
> 
>> +static const struct actlr_variant sm8550_actlr[] = {
>> +    { .io_start = 0x15000000, .actlrcfg = sm8550_apps_actlr_cfg,
>> +            .num_actlrcfg = ARRAY_SIZE(sm8550_apps_actlr_cfg) },
>> +    { .io_start = 0x03da0000, .actlrcfg = sm8550_gfx_actlr_cfg,
>> +            .num_actlrcfg = ARRAY_SIZE(sm8550_gfx_actlr_cfg) },
>> +};
> Just a nit again, but if struct definitions need to be wrapped, this looks
> better:
> 
> {
>      .io_start = 0...,
>      .aclrcfg = ...,
>      .num_actlrcfg = ARR..,
> }, {
>      .io_start = 0..,
>      .aclrcfg = ...,
>      .num_actlrcfg = ARR..,
> };
> 

Noted, will wrap this to keep each member in a new line as shown.
This looks much cleaner. Thanks for this suggestion.

Regards,
Bibek

> Konrad

Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550

[Rob Clark]

On Tue, Jan 16, 2024 at 7:06 AM Bibek Kumar Patro
<quic_bibekkum@quicinc.com> wrote:
>
> Add ACTLR data table for SM8550 along with support for
> same including SM8550 specific implementation operations.
>
> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
> ---
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 85 ++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
>
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index e6fad02aae92..26acfbdafd0f 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -23,6 +23,12 @@
>
>  #define CPRE                   (1 << 1)
>  #define CMTLB                  (1 << 0)
> +#define PREFETCH_SHIFT         8
> +#define PREFETCH_DEFAULT       0
> +#define PREFETCH_SHALLOW       (1 << PREFETCH_SHIFT)
> +#define PREFETCH_MODERATE      (2 << PREFETCH_SHIFT)
> +#define PREFETCH_DEEP          (3 << PREFETCH_SHIFT)
> +#define PREFETCH_SWITCH_GFX    (5 << 3)

so, PREFETCH_SWITCH_GFX seems to actually be two things, b5 is
actually PRR_ENABLE and b3 is ??

Probably you should drop the PRR_ENABLE, and perhaps give b3 a better name

BR,
-R

>
>  struct actlr_config {
>         u16 sid;
> @@ -30,6 +36,75 @@ struct actlr_config {
>         u32 actlr;
>  };
>
> +static const struct actlr_config sm8550_apps_actlr_cfg[] = {
> +       { 0x18a0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x18e0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x0800, 0x0020, PREFETCH_DEFAULT | CMTLB },
> +       { 0x1800, 0x00c0, PREFETCH_DEFAULT | CMTLB },
> +       { 0x1820, 0x0000, PREFETCH_DEFAULT | CMTLB },
> +       { 0x1860, 0x0000, PREFETCH_DEFAULT | CMTLB },
> +       { 0x0c01, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c02, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c03, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c04, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c05, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c06, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c07, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c08, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c09, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c0c, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c0d, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c0e, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x0c0f, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1961, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1962, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1963, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1964, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1965, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1966, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1967, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1968, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1969, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x196c, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x196d, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x196e, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x196f, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c1, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c2, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c3, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c4, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c5, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c6, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c7, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c8, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19c9, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19cc, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19cd, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19ce, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x19cf, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
> +       { 0x1c00, 0x0002, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1c01, 0x0000, PREFETCH_DEFAULT | CMTLB },
> +       { 0x1920, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1923, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1924, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1940, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1941, 0x0004, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1943, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1944, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +       { 0x1947, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
> +};
> +
> +static const struct actlr_config sm8550_gfx_actlr_cfg[] = {
> +       { 0x0000, 0x03ff, PREFETCH_SWITCH_GFX | PREFETCH_DEEP | CPRE | CMTLB },
> +};
> +
> +static const struct actlr_variant sm8550_actlr[] = {
> +       { .io_start = 0x15000000, .actlrcfg = sm8550_apps_actlr_cfg,
> +                       .num_actlrcfg = ARRAY_SIZE(sm8550_apps_actlr_cfg) },
> +       { .io_start = 0x03da0000, .actlrcfg = sm8550_gfx_actlr_cfg,
> +                       .num_actlrcfg = ARRAY_SIZE(sm8550_gfx_actlr_cfg) },
> +};
> +
>  static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
>  {
>         return container_of(smmu, struct qcom_smmu, smmu);
> @@ -601,6 +676,15 @@ static const struct qcom_smmu_match_data sdm845_smmu_500_data = {
>         /* Also no debug configuration. */
>  };
>
> +
> +static const struct qcom_smmu_match_data sm8550_smmu_500_impl0_data = {
> +       .impl = &qcom_smmu_500_impl,
> +       .adreno_impl = &qcom_adreno_smmu_500_impl,
> +       .cfg = &qcom_smmu_impl0_cfg,
> +       .actlrvar = sm8550_actlr,
> +       .num_smmu = ARRAY_SIZE(sm8550_actlr),
> +};
> +
>  static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
>         .impl = &qcom_smmu_500_impl,
>         .adreno_impl = &qcom_adreno_smmu_500_impl,
> @@ -635,6 +719,7 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
>         { .compatible = "qcom,sm8250-smmu-500", .data = &qcom_smmu_500_impl0_data },
>         { .compatible = "qcom,sm8350-smmu-500", .data = &qcom_smmu_500_impl0_data },
>         { .compatible = "qcom,sm8450-smmu-500", .data = &qcom_smmu_500_impl0_data },
> +       { .compatible = "qcom,sm8550-smmu-500", .data = &sm8550_smmu_500_impl0_data },
>         { .compatible = "qcom,smmu-500", .data = &qcom_smmu_500_impl0_data },
>         { }
>  };
> --
> 2.17.1
>
>

Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550

[Bibek Kumar Patro]

On 6/4/2024 10:43 PM, Rob Clark wrote:
> On Tue, Jan 16, 2024 at 7:06 AM Bibek Kumar Patro
> <quic_bibekkum@quicinc.com> wrote:
>>
>> Add ACTLR data table for SM8550 along with support for
>> same including SM8550 specific implementation operations.
>>
>> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
>> ---
>>   drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 85 ++++++++++++++++++++++
>>   1 file changed, 85 insertions(+)
>>
>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> index e6fad02aae92..26acfbdafd0f 100644
>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> @@ -23,6 +23,12 @@
>>
>>   #define CPRE                   (1 << 1)
>>   #define CMTLB                  (1 << 0)
>> +#define PREFETCH_SHIFT         8
>> +#define PREFETCH_DEFAULT       0
>> +#define PREFETCH_SHALLOW       (1 << PREFETCH_SHIFT)
>> +#define PREFETCH_MODERATE      (2 << PREFETCH_SHIFT)
>> +#define PREFETCH_DEEP          (3 << PREFETCH_SHIFT)
>> +#define PREFETCH_SWITCH_GFX    (5 << 3)
> 
> so, PREFETCH_SWITCH_GFX seems to actually be two things, b5 is
> actually PRR_ENABLE and b3 is ??
> 

only b5 is not prr related bit as I checked now, will drop b3
and use this field for PRR bit only.

Thanks & regards,
Bibek

> Probably you should drop the PRR_ENABLE, and perhaps give b3 a better name
>  > BR,
> -R
> 

Thanks & regards,
Bibek
>>
>>   struct actlr_config {
>>          u16 sid;
>> @@ -30,6 +36,75 @@ struct actlr_config {
>>          u32 actlr;
>>   };
>>
>> +static const struct actlr_config sm8550_apps_actlr_cfg[] = {
>> +       { 0x18a0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x18e0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x0800, 0x0020, PREFETCH_DEFAULT | CMTLB },
>> +       { 0x1800, 0x00c0, PREFETCH_DEFAULT | CMTLB },
>> +       { 0x1820, 0x0000, PREFETCH_DEFAULT | CMTLB },
>> +       { 0x1860, 0x0000, PREFETCH_DEFAULT | CMTLB },
>> +       { 0x0c01, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c02, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c03, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c04, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c05, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c06, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c07, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c08, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c09, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c0c, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c0d, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c0e, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x0c0f, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1961, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1962, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1963, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1964, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1965, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1966, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1967, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1968, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1969, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x196c, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x196d, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x196e, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x196f, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c1, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c2, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c3, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c4, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c5, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c6, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c7, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c8, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19c9, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19cc, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19cd, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19ce, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x19cf, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> +       { 0x1c00, 0x0002, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1c01, 0x0000, PREFETCH_DEFAULT | CMTLB },
>> +       { 0x1920, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1923, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1924, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1940, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1941, 0x0004, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1943, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1944, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +       { 0x1947, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> +};
>> +
>> +static const struct actlr_config sm8550_gfx_actlr_cfg[] = {
>> +       { 0x0000, 0x03ff, PREFETCH_SWITCH_GFX | PREFETCH_DEEP | CPRE | CMTLB },
>> +};
>> +
>> +static const struct actlr_variant sm8550_actlr[] = {
>> +       { .io_start = 0x15000000, .actlrcfg = sm8550_apps_actlr_cfg,
>> +                       .num_actlrcfg = ARRAY_SIZE(sm8550_apps_actlr_cfg) },
>> +       { .io_start = 0x03da0000, .actlrcfg = sm8550_gfx_actlr_cfg,
>> +                       .num_actlrcfg = ARRAY_SIZE(sm8550_gfx_actlr_cfg) },
>> +};
>> +
>>   static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
>>   {
>>          return container_of(smmu, struct qcom_smmu, smmu);
>> @@ -601,6 +676,15 @@ static const struct qcom_smmu_match_data sdm845_smmu_500_data = {
>>          /* Also no debug configuration. */
>>   };
>>
>> +
>> +static const struct qcom_smmu_match_data sm8550_smmu_500_impl0_data = {
>> +       .impl = &qcom_smmu_500_impl,
>> +       .adreno_impl = &qcom_adreno_smmu_500_impl,
>> +       .cfg = &qcom_smmu_impl0_cfg,
>> +       .actlrvar = sm8550_actlr,
>> +       .num_smmu = ARRAY_SIZE(sm8550_actlr),
>> +};
>> +
>>   static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
>>          .impl = &qcom_smmu_500_impl,
>>          .adreno_impl = &qcom_adreno_smmu_500_impl,
>> @@ -635,6 +719,7 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
>>          { .compatible = "qcom,sm8250-smmu-500", .data = &qcom_smmu_500_impl0_data },
>>          { .compatible = "qcom,sm8350-smmu-500", .data = &qcom_smmu_500_impl0_data },
>>          { .compatible = "qcom,sm8450-smmu-500", .data = &qcom_smmu_500_impl0_data },
>> +       { .compatible = "qcom,sm8550-smmu-500", .data = &sm8550_smmu_500_impl0_data },
>>          { .compatible = "qcom,smmu-500", .data = &qcom_smmu_500_impl0_data },
>>          { }
>>   };
>> --
>> 2.17.1
>>
>>

[PATCH v8 5/5] iommu/arm-smmu: add ACTLR data and support for SC7280

[Bibek Kumar Patro]

Add ACTLR data table for SC7280 along with support for
same including SC7280 specific implementation operations.

Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 30 +++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 26acfbdafd0f..8e52176b4108 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -36,6 +36,27 @@ struct actlr_config {
 	u32 actlr;
 };

+static const struct actlr_config sc7280_apps_actlr_cfg[] = {
+	{ 0x0800, 0x24e1, PREFETCH_DEFAULT | CMTLB },
+	{ 0x2000, 0x0163, PREFETCH_DEFAULT | CMTLB },
+	{ 0x2080, 0x0461, PREFETCH_DEFAULT | CMTLB },
+	{ 0x2100, 0x0161, PREFETCH_DEFAULT | CMTLB },
+	{ 0x0900, 0x0407, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x2180, 0x0027, PREFETCH_SHALLOW | CPRE | CMTLB },
+	{ 0x1000, 0x07ff, PREFETCH_DEEP | CPRE | CMTLB },
+};
+
+static const struct actlr_config sc7280_gfx_actlr_cfg[] = {
+	{ 0x0000, 0x07ff, PREFETCH_SWITCH_GFX | PREFETCH_DEEP | CPRE | CMTLB },
+};
+
+static const struct actlr_variant sc7280_actlr[] = {
+	{ .io_start = 0x15000000, .actlrcfg = sc7280_apps_actlr_cfg,
+			.num_actlrcfg = ARRAY_SIZE(sc7280_apps_actlr_cfg) },
+	{ .io_start = 0x03da0000, .actlrcfg = sc7280_gfx_actlr_cfg,
+			.num_actlrcfg = ARRAY_SIZE(sc7280_gfx_actlr_cfg) },
+};
+
 static const struct actlr_config sm8550_apps_actlr_cfg[] = {
 	{ 0x18a0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
 	{ 0x18e0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
@@ -676,6 +697,13 @@ static const struct qcom_smmu_match_data sdm845_smmu_500_data = {
 	/* Also no debug configuration. */
 };

+static const struct qcom_smmu_match_data sc7280_smmu_500_impl0_data = {
+	.impl = &qcom_smmu_500_impl,
+	.adreno_impl = &qcom_adreno_smmu_500_impl,
+	.cfg = &qcom_smmu_impl0_cfg,
+	.actlrvar = sc7280_actlr,
+	.num_smmu = ARRAY_SIZE(sc7280_actlr),
+};

 static const struct qcom_smmu_match_data sm8550_smmu_500_impl0_data = {
 	.impl = &qcom_smmu_500_impl,
@@ -702,7 +730,7 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
 	{ .compatible = "qcom,qdu1000-smmu-500", .data = &qcom_smmu_500_impl0_data  },
 	{ .compatible = "qcom,sc7180-smmu-500", .data = &qcom_smmu_500_impl0_data },
 	{ .compatible = "qcom,sc7180-smmu-v2", .data = &qcom_smmu_v2_data },
-	{ .compatible = "qcom,sc7280-smmu-500", .data = &qcom_smmu_500_impl0_data },
+	{ .compatible = "qcom,sc7280-smmu-500", .data = &sc7280_smmu_500_impl0_data },
 	{ .compatible = "qcom,sc8180x-smmu-500", .data = &qcom_smmu_500_impl0_data },
 	{ .compatible = "qcom,sc8280xp-smmu-500", .data = &qcom_smmu_500_impl0_data },
 	{ .compatible = "qcom,sdm630-smmu-v2", .data = &qcom_smmu_v2_data },
--
2.17.1