Re: [PATCH 1/8] media: dt-bindings: qcom-kaanapali-iris: Add kaanapali video codec binding

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 9/25/25 9:57 AM, Vikash Garodia wrote:
> 
> On 9/25/2025 8:36 AM, Dmitry Baryshkov wrote:
>> On Thu, Sep 25, 2025 at 04:44:39AM +0530, Vikash Garodia wrote:
>>> Kaanapali SOC brings in the new generation of video IP i.e iris4. When
>>> compared to previous generation, iris3x, it has,
>>> - separate power domains for stream and pixel processing hardware blocks
>>>   (bse and vpp).
>>> - additional power domain for apv codec.
>>> - power domains for individual pipes (VPPx).
>>> - different clocks and reset lines.
>>>
>>> There are variants of this hardware, where only a single VPP pipe would
>>> be functional (VPP0), and APV may not be present. In such case, the
>>> hardware can be enabled without those 2 related power doamins, and
>>> corresponding clocks. This explains the min entries for power domains
>>> and clocks.
>>> Iommus include all the different stream-ids which can be possibly
>>> generated by vpu4 video hardware in both secure and non secure
>>> execution mode.
>>>
>>> This patch depends on following patches
>>> https://lore.kernel.org/all/20250924-knp-interconnect-v1-1-4c822a72141c@oss.qualcomm.com/
>>> https://lore.kernel.org/all/20250924-knp-clk-v1-3-29b02b818782@oss.qualcomm.com/
>>
>> This doesn't belong to the commit message. But you also can drop this
>> dependency alltogether. Could you please do it?
> 
> Sure, i see below works good w.r.t schema and dtb checker. Please review and
> confirm.

lgtm, you can also drop the interconnect header (i think you don't
need any rpmhpd additions so it can stay - potayto/potahto)

Konrad

> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,kaanapali-iris.yaml
> b/Documentation/devicetree/bindings/media/qcom,kaanapali-iris.yaml
> index f3528d514fe2..537e8d627a72 100644
> --- a/Documentation/devicetree/bindings/media/qcom,kaanapali-iris.yaml
> +++ b/Documentation/devicetree/bindings/media/qcom,kaanapali-iris.yaml
> @@ -106,9 +106,7 @@ unevaluatedProperties: false
> 
> examples:
>    - |
> -    #include <dt-bindings/interconnect/qcom,kaanapali-rpmh.h>
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> -    #include <dt-bindings/clock/qcom,kaanapali-gcc.h>
>      #include <dt-bindings/interconnect/qcom,icc.h>
>      #include <dt-bindings/power/qcom,rpmhpd.h>
> 
> @@ -136,10 +134,10 @@ examples:
> 
>        operating-points-v2 = <&iris_opp_table>;
> 
> -      clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
> +      clocks = <&gcc_video_axi0_clk>,
> <&video_cc_mvs0c_clk>,
> <&video_cc_mvs0_clk>,
> -               <&gcc GCC_VIDEO_AXI1_CLK>,
> +               <&gcc_video_axi1_clk>,
> <&video_cc_mvs0c_freerun_clk>,
> <&video_cc_mvs0_freerun_clk>,
> <&video_cc_mvs0b_clk>,
> @@ -157,17 +155,15 @@ examples:
>                      "vcodec_vpp1",
>                      "vcodec_apv";
> 
> -      interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> -                       &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
> -                      <&mmss_noc MASTER_VIDEO_MVP QCOM_ICC_TAG_ALWAYS
> -                       &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +      interconnects = <&gem_noc_master_appss_proc &config_noc_slave_venus_cfg>,
> +                      <&mmss_noc_master_video_mvp &mc_virt_slave_ebi1>;
>        interconnect-names = "cpu-cfg",
>                             "video-mem";
> 
>        memory-region = <&video_mem>;
> 
> -      resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
> -               <&gcc GCC_VIDEO_AXI1_CLK_ARES>,
> +      resets = <&gcc_video_axi0_clk_ares>,
> +               <&gcc_video_axi1_clk_ares>,
> 
> Regards,
> Vikash
>