* [PATCH] arm64: dts: qcom: eliza: Add thermal sensors
@ 2026-03-27 10:12 Krzysztof Kozlowski
2026-03-27 10:38 ` Krzysztof Kozlowski
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2026-03-27 10:12 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Add TSENS thermal sensors to Qualcomm Eliza SoC among with thermal
zones. The TSENS is compatible with previous generations.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
Binding was waiting for 1.5 months on the lists. Eventually I resent it
now:
https://lore.kernel.org/all/20260327100733.365573-2-krzysztof.kozlowski@oss.qualcomm.com/
so feel free to pick up the DTS with the binding, since it is not being
taken via thermal.
---
arch/arm64/boot/dts/qcom/eliza.dtsi | 561 ++++++++++++++++++++++++++++
1 file changed, 561 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
index 62fccb43a7e8..4a7a0ac40ce6 100644
--- a/arch/arm64/boot/dts/qcom/eliza.dtsi
+++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
@@ -912,6 +912,51 @@ pdc: interrupt-controller@b220000 {
interrupt-controller;
};
+ tsens0: thermal-sensor@c228000 {
+ compatible = "qcom,eliza-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c228000 0x0 0x1000>,
+ <0x0 0x0c222000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <13>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c229000 {
+ compatible = "qcom,eliza-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c229000 0x0 0x1000>,
+ <0x0 0x0c223000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <14>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@c22a000 {
+ compatible = "qcom,eliza-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c22a000 0x0 0x1000>,
+ <0x0 0x0c224000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <5>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
spmi: arbiter@c400000 {
compatible = "qcom,eliza-spmi-pmic-arb",
"qcom,x1e80100-spmi-pmic-arb";
@@ -1313,6 +1358,522 @@ nsp_noc: interconnect@320c0000 {
};
};
+ thermal-zones {
+ aoss0-thermal {
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ aoss-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ aoss-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss2-thermal {
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ aoss-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ aoss-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ thermal-sensors = <&tsens1 12>;
+
+ trips {
+ camera-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ camera-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera1-thermal {
+ thermal-sensors = <&tsens1 13>;
+
+ trips {
+ camera-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ camera-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-top-thermal {
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-bottom-thermal {
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-top-thermal {
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-bottom-thermal {
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-top-thermal {
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-bottom-thermal {
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-top-thermal {
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-bottom-thermal {
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-top-thermal {
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-bottom-thermal {
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpuss-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ cpuss-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpuss-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ cpuss-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-thermal {
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ ddr-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ ddr-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ gpu-alert {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ gpu-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpu-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ polling-delay-passive = <10>;
+
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ gpu-alert {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ gpu-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpu-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem0-thermal {
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ modem-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ modem-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem1-thermal {
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ modem-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ modem-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem2-thermal {
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ modem-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ modem-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem3-thermal {
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ modem-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ modem-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx0-thermal {
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ nsphmx-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ nsphmx-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx1-thermal {
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ nsphmx-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ nsphmx-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphvx0-thermal {
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ nsphvx-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ nsphvx-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphvx1-thermal {
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ nsphvx-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ nsphvx-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ video-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ video-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
--
2.51.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] arm64: dts: qcom: eliza: Add thermal sensors
2026-03-27 10:12 [PATCH] arm64: dts: qcom: eliza: Add thermal sensors Krzysztof Kozlowski
@ 2026-03-27 10:38 ` Krzysztof Kozlowski
2026-03-27 12:38 ` Konrad Dybcio
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2026-03-27 10:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel
On 27/03/2026 11:12, Krzysztof Kozlowski wrote:
> Add TSENS thermal sensors to Qualcomm Eliza SoC among with thermal
> zones. The TSENS is compatible with previous generations.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>
> ---
>
> Binding was waiting for 1.5 months on the lists. Eventually I resent it
> now:
> https://lore.kernel.org/all/20260327100733.365573-2-krzysztof.kozlowski@oss.qualcomm.com/
Binding was applied just now, so this DTS patch is unblocked.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm64: dts: qcom: eliza: Add thermal sensors
2026-03-27 10:12 [PATCH] arm64: dts: qcom: eliza: Add thermal sensors Krzysztof Kozlowski
2026-03-27 10:38 ` Krzysztof Kozlowski
@ 2026-03-27 12:38 ` Konrad Dybcio
2026-03-27 15:28 ` Abel Vesa
2026-03-30 16:01 ` Bjorn Andersson
3 siblings, 0 replies; 5+ messages in thread
From: Konrad Dybcio @ 2026-03-27 12:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel
On 3/27/26 11:12 AM, Krzysztof Kozlowski wrote:
> Add TSENS thermal sensors to Qualcomm Eliza SoC among with thermal
> zones. The TSENS is compatible with previous generations.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>
> ---
>
> Binding was waiting for 1.5 months on the lists. Eventually I resent it
> now:
> https://lore.kernel.org/all/20260327100733.365573-2-krzysztof.kozlowski@oss.qualcomm.com/
>
> so feel free to pick up the DTS with the binding, since it is not being
> taken via thermal.
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm64: dts: qcom: eliza: Add thermal sensors
2026-03-27 10:12 [PATCH] arm64: dts: qcom: eliza: Add thermal sensors Krzysztof Kozlowski
2026-03-27 10:38 ` Krzysztof Kozlowski
2026-03-27 12:38 ` Konrad Dybcio
@ 2026-03-27 15:28 ` Abel Vesa
2026-03-30 16:01 ` Bjorn Andersson
3 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2026-03-27 15:28 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
On 26-03-27 11:12:26, Krzysztof Kozlowski wrote:
> Add TSENS thermal sensors to Qualcomm Eliza SoC among with thermal
> zones. The TSENS is compatible with previous generations.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm64: dts: qcom: eliza: Add thermal sensors
2026-03-27 10:12 [PATCH] arm64: dts: qcom: eliza: Add thermal sensors Krzysztof Kozlowski
` (2 preceding siblings ...)
2026-03-27 15:28 ` Abel Vesa
@ 2026-03-30 16:01 ` Bjorn Andersson
3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2026-03-30 16:01 UTC (permalink / raw)
To: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-msm, devicetree, linux-kernel, Krzysztof Kozlowski
On Fri, 27 Mar 2026 11:12:26 +0100, Krzysztof Kozlowski wrote:
> Add TSENS thermal sensors to Qualcomm Eliza SoC among with thermal
> zones. The TSENS is compatible with previous generations.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: eliza: Add thermal sensors
commit: 7f390d6ccbaa3313758b172fd8cbadc6c652c48a
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-03-30 16:02 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-27 10:12 [PATCH] arm64: dts: qcom: eliza: Add thermal sensors Krzysztof Kozlowski
2026-03-27 10:38 ` Krzysztof Kozlowski
2026-03-27 12:38 ` Konrad Dybcio
2026-03-27 15:28 ` Abel Vesa
2026-03-30 16:01 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox