From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Douglas Anderson <dianders@chromium.org>
Cc: Stephen Boyd <sboyd@kernel.org>, Taniya Das <tdas@codeaurora.org>,
vbadigan@codeaurora.org, Andy Gross <agross@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] clk: qcom: gcc-sc7180: Use floor ops for sdcc clks
Date: Thu, 10 Dec 2020 13:39:27 -0600 [thread overview]
Message-ID: <X9J5b8G6qh8ojmkM@builder.lan> (raw)
In-Reply-To: <20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid>
On Thu 10 Dec 12:22 CST 2020, Douglas Anderson wrote:
> I would repeat the same commit message that was in commit 5e4b7e82d497
> ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems
> silly to do so when you could just go read that commit.
>
> NOTE: this is actually extra terrible because we're missing the 50 MHz
> rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add
> 50 MHz clock rate for SDC2")). That means then when you run an older
> SD card it'll try to clock it at 100 MHz when it's only specced to run
> at 50 MHz max. As you can probably guess that doesn't work super
> well.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
> ---
> Taniya: can you please update whatever process is used to generate
> these clock files to use floor for SD card clocks. I hope you can
> also scour through these files looking for similar problems on other
> SoCs and submit patches for them.
>
> drivers/clk/qcom/gcc-sc7180.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
> index 68d8f7aaf64e..b080739ab0c3 100644
> --- a/drivers/clk/qcom/gcc-sc7180.c
> +++ b/drivers/clk/qcom/gcc-sc7180.c
> @@ -642,7 +642,7 @@ static struct clk_rcg2 gcc_sdcc1_ice_core_clk_src = {
> .name = "gcc_sdcc1_ice_core_clk_src",
> .parent_data = gcc_parent_data_0,
> .num_parents = 4,
> - .ops = &clk_rcg2_ops,
> + .ops = &clk_rcg2_floor_ops,
> },
> };
>
> @@ -666,7 +666,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
> .name = "gcc_sdcc2_apps_clk_src",
> .parent_data = gcc_parent_data_5,
> .num_parents = 5,
> - .ops = &clk_rcg2_ops,
> + .ops = &clk_rcg2_floor_ops,
> },
> };
>
> --
> 2.29.2.576.ga3fc446d84-goog
>
next prev parent reply other threads:[~2020-12-10 19:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 18:22 [PATCH 1/2] clk: qcom: gcc-sc7180: Use floor ops for sdcc clks Douglas Anderson
2020-12-10 18:22 ` [PATCH 2/2] clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2 Douglas Anderson
2020-12-10 19:41 ` Bjorn Andersson
2020-12-10 20:27 ` Stephen Boyd
2020-12-10 19:39 ` Bjorn Andersson [this message]
2020-12-10 20:27 ` [PATCH 1/2] clk: qcom: gcc-sc7180: Use floor ops for sdcc clks Stephen Boyd
2020-12-10 21:00 ` Doug Anderson
2020-12-10 20:27 ` Stephen Boyd
2020-12-29 20:15 ` patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X9J5b8G6qh8ojmkM@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
--cc=vbadigan@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox